Replaces the ACME threaded rod and threaded nut on your etrailer or Ram square, direct-weld jack with a 10,000-lb lift capacity and a 12,000-lb static capacity. Designed for TJD-12000 Series jacks.Features: Replaces the threaded ACME rod and lift nut from your etrailer and Ram square, direct-weld jacks with a 10,000-lb lift capacity and a 12,000-lb static capacity Designed for TJD-12000 Series
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 33-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 6.5K., rectangular, pivoting footpads are included, but you can use larger, 9-inch-diameter pads (LG-210475 - sold separately) instead if you often camp on soft ground. This system and its parts were designed to be
Perfect for Class A motorhomes with HWH and Atwood leveling systems, these rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area adds ... Features: Heavy-duty rubber pads snap onto your Class A motorhome's HWH or Atwood leveling jacks to make leveling faster and easier Eliminates the need to crawl under your motorhome to position
Replaces 1 machined motor mounting bolt for Atwood standard-duty, heavy-duty, and super-duty fifth-wheel landing gear. Lock washer (AT86111) sold separately.Features: Replaces 1 machined motor mounting bolt for Atwood 5th-wheel landing gear Inserts through the motor and attaches to the landing gear plate Works in conjunction with lock washer (AT86111 -
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 6.5K. operation. Large, rectangular, pivoting footpads are included, but you can use larger, 9-inch-diameter pads (LG-210475 - sold separately) instead if you often camp on soft ground. This system and its parts
Manual landing gear lets you jack up your fifth-wheel trailer quickly and easily. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined ... (LG-210475 - sold separately) instead if you often camp on soft ground. This system and its parts were designed to be compatible with most of the other fifth-wheel landing gear on the market, including Atwood
5th Wheel Camper
Landing Gear
Manual Jack
Stromberg Carlson
Weld-On
2 Jacks
Steel
7001 - 8000 lbs
New Arrivals — From Our Shop to You!
Chosen by folks who live and breathe this, just like you.
New Arrivals — From Our Shop to You!
Chosen by folks who live and breathe this, just like you.
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 5.5K. footpads are included, but you can use larger, 9-inch-diameter pads (LG-210475 - sold separately) instead if you often camp on soft ground. This system and its parts were designed to be compatible with most
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 33-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 5.5K.. This system and its parts were designed to be compatible with most of the other fifth-wheel landing gear on the market, including Atwood and Lippert. If you're replacing your old landing gear, you
Replaces the lead jack from your Stromberg Carlson landing gear set (LG-1, LG-3, or LG-183708). Lead leg has mounting location for crank or motor and connects to the follow jack with a cross shaft ... Features: Replaces the lead jack for your tandem landing gear Designed for use with Stromberg Carlson models LG-1, LG-3, and LG-183708 Can be used with most landing gear sets, including Atwood
Give your 5th-wheel trailer or camper some new legs! 19-1/2" inside to inside between weld stops. Includes manual crank and 1 motor, with room to add a 2nd one (sold separately).Features: Replacement landing gear kit for a manual or battery-powered setup Gearbox works with single- and dual-motor configurations Components can replace most Atwood and Venture parts Connecting
Give your 5th-wheel trailer or camper some new legs! 19-1/2" inside to inside between weld stops. Includes manual crank and 1 motor, with room to add a 2nd one (sold separately).Features: Replacement landing gear kit for a manual or battery-powered setup Gearbox works with single- and dual-motor configurations Components can replace most Atwood and Venture parts Connecting
Designed to level and stabilize your trailer or RV, each of these jacks provide simple, effective leveling. Manual crank can be switched out for a motor (LC142178 - sold separately). Retracted height ...
Use this electric tongue jack to lift your trailer with the flip of a switch. The sturdy steel jack can handle up to 5,000 lbs. It has 18" of travel and a 5" drop leg for extra lift. LED ... allows for greater adjustability Rust-resistant powder coated steel parts are strong and durable Housing is made of vacuum-formed plastic for protection from the elements Black cover is painted to resist
Electric A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 9", an extended height of 28-1/2", and 19-1/2" of travel. Drop leg offers an extra 5-5/8" ... Features: Electric jack lets you raise and lower your A-frame trailer Drop leg allows for increased lift and saves time when raising or lowering Pin and clip holds leg at desired location 2 Toggle
Replaces the follow jack from your Stromberg Carlson landing gear. Designed for use with models LG-1, LG-3, and LG-183708. Follow leg connects to the lead jack in your landing gear set with a cross ... Features: Replaces the follow jack for your tandem landing gear Designed for use with Stromberg Carlson models LG-1, LG-3, and LG-183708 Can be used with most landing gear sets, including Atwood
Replaces the follow jack from your Stromberg Carlson landing gear. Designed for use with models LG-2 and LG-4. Follow leg connects to the lead jack in your landing gear set with a cross shaft (not ... Features: Replaces the follow jack for your tandem landing gear Designed for use with Stromberg Carlson models LG-2 and LG-4 Can be used with most electric landing gear sets, including Atwood
... a replacement for electric landing gear jacks. landing gear sets, including Atwood, Venture, and Lippert models Serves as a replacement motor and switch for Stromberg Carlson electric landing gear (LG-1 or LG-2) Single-speed motor won't trip
Just the bones - replacement setup comes with everything but the electrical. Measures 15-1/2" between weld stops. 16" of drop leg makes up almost half of the total lift. Get your 5th wheel back into action!Features: Replacement landing gear kit for a manual or battery-powered setup Gearbox works with single- and dual-motor configurations Components can replace most Atwood and Venture parts Connecting
Give your 5th-wheel trailer or camper some new legs! Upgraded motor works nearly twice as fast as the standard 80 RPM base model. Outer tubes are 29-1/2" long with 15-1/2" between weld stops. Total lift includes 16" of drop leg.Features: Replacement landing gear kit for a manual or battery-powered setup Components can replace most Lippert (LCI), Atwood, Venture, etrailer, or Pac-Rim parts Cross shaft extends to fit your
Having two motors gives you more leveling control when setting up camp on uneven ground. 74" Bracket height when extended. 3 Universal mount weld stops let you choose how to orient the new legs. Total lift includes 17" of drop leg travel.Features: Takes the effort out of raising, lowering, and leveling your 5th-wheel trailer Easily fine-tune your 5th-wheel's height and level Independently operate each jack Distributes weight
Ideal for multiple agricultural and commercial applications, this standard A-frame jack features a 10-13/16" retracted height and measures 10-11/16" from the mounting bracket to the top ... Features: Dependable jack is recognized as industry standard for agricultural and commercial applications ASABE compliant Precision-fitted parts provide exceptional stability and reliability
Replaces the switch used to extend and retract your Lippert electric trailer jack (LC285318). Requires original hardware for installation.Features: Replaces the switch used to extend and retract your Lippert electric trailer jack (LC285318) Requires original hardware for installation Fits: Model number LC285318 , Lippert electric
Replaces the gears and roll pins on your etrailer or Ram square, direct-weld, sidewind jack with a 5,000-lb or 7,000-lb capacity. Designed for TJD-5000S and TJD-7000S Series jacks.Features: Replacement gears and roll pins work with etrailer and Ram square, direct-weld, sidewind jacks that have a 5,000-lb or 7,000-lb capacity Designed for use with Ram TJD-5000S and TJD-7000S
Filters
