Prevent water from leaking into the doors and windows on your enclosed trailer with this D-shaped rubber seal. Durable foam rubber is water resistant. Adhesive back makes installation easy.
Right-hand screen door latch replaces 1 worn or damaged door latch on Philips-style screen doors. Mounting holes measure 2-5/16" on center. Mounting screws included.
Get rid of annoying drips with this handy rubber railing. Sticks in place to function like a gutter, diverting rain away from any trouble spots where running water is giving you problems. Adhesive backing is pre-applied for an easy DIY install.
Replaces the latch for your RV entry door that swings to the right as you're outside. Installs on the left-hand side of your RV entry door. Minimal assembly required. Easy to install, mounting hardware not included.
Bring your pet with you on your next adventure without worrying about them damaging or breaking through your screen door. Black powder coated aluminum screen fits and locks into existing channels on your screen door for added protection.
Use this rubber bumper as a cushion to prevent your trailer ramp door from getting scratched or damaged when it hits the ground. It can also be installed as a stopper to prevent barn doors from banging into the side of your trailer.
Hey Ray, so we have the part #18159 which would work great to secure the 7-way of the #ETBC7L that you'll be installing with the Curt Echo #C51180. It's also pretty easy to install too.
Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…
I checked with Aliner for availability of key number SM103 and and they do still have some keys for that lock. You can contact them directly for a replacement key. I sent their phone contact information to you. If you ever decide to replace the whole…
Hey Dale! Sorry to say but they stopped putting the brake controller adapter plugs in the Jeep Grand Cherokees a few years back. 2020 was the last model year they included them. The Curt Echo item #C51180 is going to be the only plug and play option.…
Thanks for the pictures! I have a set of flush mounted crossbars that will work with your Kia's raised rails, however the Yakima RailBar Crossbars item #Y00447-2 won't work. They don't fit Kia's rails. It looks like they are for older…
I do have a solution for your 2024 Kia Telluride that has the LED taillights that does allow it to have both a 4-way and 7-way plus install a brake controller but it is not with the #TK74CR which does not work for you based on the LED taillights.…
We can definitely help set you up with a tow package for your 2024 Kia Telluride. The main components you will need are a hitch, 7-way wiring harness, and a brake controller. You will need a good ball mount too, but it sounds like you have that…
If you add a dual receiver adapter like the Curt Dual 2" Receiver Tube Adapter, 8" Extension #D-192 to your Toyota Tacoma, it will not only add the tongue weight, but will reduce your hitches tongue weight capacity by 50%. I recommend going…
In order for your Sienna to activate the electric drum brakes on your trailer it will need to have a 7-way trailer socket. This connector carries lighting signals, 12V maintenance power for the trailer's battery (or power for it's lights) as…
Yes you have everything exactly right. Since you have a 4-way installed on your 2013 Toyota Sienna the correct kit to convert it to a 7-way and install the Curt Echo #C51180 would be the part #ETBC7L. We actually put together the kit part #ETBC7L…
Hey Ken, A 2015 Aliner Expedition should have a 3,500lb axle, which should have a 2-3/8" diameter axle tube. If this is true then you can use the Dexter Trailer Springs Over-Under Conversion Kit #K71-384-00 to raise the trailer height. This is…
For a torsion axle such as your Avan Aliner we have kits available that will give you some extra clearance. The Avan Aliner is a single axle trailer, so we have two kits that will work for you. Torsion axles must be side-mounted and not top mounted…
Window frame replaces 1 worn or damaged window frame on your RV's entry door. Additional UV protection molded into the plastic to stop yellowing. Includes pre-applied butyl sealant for both door and window seals. Glass sold separately.
Right-hand screen door latch replaces 1 worn or damaged door latch on Amerimax-style screen doors. Mounting holes measure 3" on center. Mounting screws are included.
Replaces 1 worn or damaged strike plate on your Bauer Products RV door lock (BP-7, BP-8D, BP-8RV, or NE Series). Zinc-plated steel construction resists corrosion.
Replaces the outside door striker hook for your RV entry door. The hook holds the latch of your screen door, letting both doors open and close together.
Use this rubber bumper as a cushion to prevent your trailer ramp door from getting scratched or damaged when it hits the ground. It can also be installed as a stopper to prevent barn doors from banging into the side of your trailer.
Replaces or upgrades 1 entry door hinge on your RV. Controlled Motion technology holds the door open in any position instead of allowing the door to swing freely. 6-Leaf design. White color.
Replace broken or worn-out weather stripping around your doors and hatches on your RV before water damage creates a costly headache. Peel-and-stick adhesive is pre-applied for an easy DIY installation.
Standard key lock replaces 1 worn or damaged lock on your RV compartment door. Direct replacement for 1-3/8" long core lock. Chrome-plated zinc lock is universal and includes both flat and offset blades.
Replace a worn or damaged window frame on the exterior of your RV's entry door. Helps protect your RV's interior from the elements. Mounting screws, interior frame, and glass all sold separately.
Replace broken or worn-out weather stripping around your doors and hatches on your RV before water damage creates a costly headache. Peel-and-stick adhesive is pre-applied for an easy DIY installation.
Replaces or upgrades 2 entry door hinges on your RV. Friction hinges hold the door open in any position instead of allowing the door to swing freely. 5-Leaf design. Black color.
Revolutionize the way you load up! This game-changing transition plate lets you roll your gear from the ground right onto your trailer floor. Fits most enclosed trailers, making it the perfect upgrade if you're looking to save time and energy.
Revolutionize the way you load up! These game-changing transition plates let you roll your gear from the ground right onto your trailer floor. Fit most enclosed trailers, making them the perfect upgrade if you're looking to save time and energy.
Keep your RV's interior off-limits with a new entry door lock. It replaces your original Global Link, Bauer, Lippert Components, Fastec (FIC), or TriMark standard entry door lock. The lock can be keyed alike to match other Global Link locks.
Keep your RV's interior off-limits with a new entry door lock. It replaces your original Global Link, Bauer, Lippert Components, Fastec (FIC), or TriMark standard entry door lock. The lock can be keyed alike to match other Global Link locks.
Filters
