Hey Colin! I reached out to Swing King and they said the trailer tongue will slide in approximately 3-1/2" on either side on the #TD88FR. With an overall length of 18-1/4" you're adding about 11-1/4" to the tongue. I went ahead and…
Hey Dennis! The Acadia and Traverse do share a lot, but the coil springs are different which means the #AL99PD will not fit your 2025 Traverse High Country. You may be able to use the universal springs like #AL60909 but you will need to measure to…
Hi Ken; the Gen-Y Hitch Trailer Coupler - Flat Plate Mount #GY93AV has mounting holes that are 4-1/2" apart on center. This follows the standard and is the only option available from Gen-Y. Unfortunately, all of our other flat mount trailer…
Hey Mario, thanks for reaching out! Congrats on your new purchase of the Ultimate Trailer Jack #322-RDJ-2K! There aren't any adapter mounts to make this so it mounts on the bracket you're pointing out in your photo, so if you want a jack to…
Hello Al, Happy to get those for you. I would want to take a gander at them too, just to see what I’m getting myself into. I was able to get the instructions for the Advent Air Low Profile RV Air Conditioner System, Single Zone, 15,000 Btu, White,…
The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…
Hello Dan, thanks for reaching out. I do have a product I believe will work for you, but the Replacement Extra Long Trailer Tongue for CE Smith Multi-Sport Trailers #CES45FR is 2" wide by 3" tall so this would not fit a 2" hitch. If…
Hey Richard, yes the hardware kit part #DM68UV is correct hardware kit for the Demco Trailer Coupler #DM88XR. That curve shape in the corners of the coupler are compensated for with the hole design in the coupler. Do you have the channel already…
If your trailer has a GVWR of 3,750lbs and your boat only weighs 1,460lbs you should be fine with the 3,500LB Leaf Springs #e54SR. I would recommend taking your boat and trailer to a nearby scale to have the trailer weighed to ensure you are under…
Leaf springs flatten out over time, so since yours are 25-1/2" center to center, you'll want to go with ones a little shorter than that: - 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 25-1/4" Long - Dacromet #e93SR The #e93SR…
If you are dealing with a single axle and the 4-Leaf Double-Eye Spring #e97SR I recommend either the standard Kit #K71-403-00 or Wet Bolt Kit #K71-358-00 which will give you new bolts, nuts and shackle straps. The U-Bolt Kit #CE23002 is a great…
Filters
