Heavy-duty jacks stabilize your lightweight cargo or camper trailer. Legs telescope to the ground when you release the lever. Jacks swing up for storage. Black powder coat finish resists corrosion ... legs extend so you can adjust the height Spring-loaded levers release drop legs for use Steel handle lets you easily fine-tune height adjustment Large foot on each jack provides stability Sturdy steel
Replaces the inner tube and spring-return drop leg for your etrailer square, direct-weld jack with spring-return drop leg (TJD-12000SP-F2, TJD-12000SP-R2, or TJD-12000SP-R2NH).Features: Replaces the inner tube and spring-return drop leg for your etrailer square, direct-weld jack with spring-return drop leg (TJD-12000SP-F2, TJD-12000SP-R2, or TJD-12000SP-R2NH) Quantity: 1
Replaces the drop leg and footplate for your etrailer or Ram square, direct-weld trailer jack with a 3,000-lb capacity. Designed for TJD-5000 Series jacks.Features: Replaces the drop leg and footplate for your etrailer or Ram square, direct-weld jack with a 3,000-lb lift capacity Designed for use with Ram TJD-5000 Series jacks Tube outer width
Drop leg adds 8" of additional lift for your etrailer or Ram A-frame jack with a 2" diameter inner tube. Extension can be adjusted in 2" increments. Corrosion-resistant, zinc-plated ... Features: Drop leg increases overall extension by 8" for maximum adjustability Works with etrailer and Ram 2,000 lb topwind or sidewind jacks Also works with 5,000-lb topwind jack TJA-5000-B
Replaces the 2" x 2" drop leg and footplate from your etrailer or Ram square, direct-weld trailer jack with a 7,000-lb capacity. Designed for TJD-7000 Series jacks.Features: Replaces the drop leg and foot from your etrailer or Ram square, direct-weld jack with a 7,000-lb capacity Designed for use with TJD-7000 Series jacks Offers an additional 13-1/2" of
Replaces 1 lead leg for your Lippert Ground Control 3.0 automatic leveling system (LC358590 or LC675817). Leg can be used in either the right or the left-hand configuration.Features: Replacement lead leg for your Lippert Ground Control 3.0 electric leveling system (LC358590 or LC675817) Leg can be used in either the right or the left-hand configuration Weight capacity
Legs
Camper Jacks
Trailer Jack
Driver Leg
Lippert
New Arrivals — From Our Shop to You!
Chosen by folks who live and breathe this, just like you.
New Arrivals — From Our Shop to You!
Chosen by folks who live and breathe this, just like you.
Replace 1 rear right leg for your Lippert Ground Control 3.0 automatic leveling system (LC358590 or LC675817). Leg includes the mounting bracket needed for installation. Snapper pin to attach footpad ... Features: Replacement right rear leg for your Lippert Ground Control 3.0 electric leveling system (LC358590 or LC675817) Mounting bracket is included for installation Snapper pin to attach footpad
Replaces 1 rear left leg for your Lippert Ground Control 3.0 automatic leveling system (LC358590 or LC675817). Leg includes the mounting bracket needed for installation. Snapper pin to attach footpad ... Features: Replacement left rear leg for your Lippert Ground Control 3.0 electric leveling system (LC358590 or LC675817) Leg includes the mounting bracket needed for installation Snapper pin to attach
Replaces a right-side, short, rear leg for your Lippert Ground Control 3.0 automatic 6-point leveling system (LC675817). Includes mounting plate and attached foot plate.Features: Replaces 1 right-side, short, rear leg for your Lippert Components Ground Control 3.0 electric 6-point leveling system (LC675817) Includes mounting plate and attached foot plate Specs
Replaces the lead jack from your Stromberg Carlson landing gear set (LG-1, LG-3, or LG-183708). Lead leg has mounting location for crank or motor and connects to the follow jack with a cross shaft ... ) Constructed of heavy-duty steel Includes drop leg and cage pin Made in the USA Specs: Total lift: 34-7/8" Travel: 19-7/8" Drop leg: 15" Overall dimensions: 32-3/4" tall x 2-1/2" wide
Replaces a left-side, short, rear leg for your Lippert Ground Control 3.0 automatic 6-point leveling system (LC675817). Includes mounting plate and attached foot plate.Features: Replaces 1 left-side, short, rear leg for your Lippert Components Ground Control 3.0 electric 6-point leveling system (LC675817) Includes mounting plate and attached foot plate Specs: Total
Replaces the landing gear lead leg assembly for your Lippert Components Venture 5th Wheel RV landing gear. Mounts to the inside of the frame rail.Features: Replaces the landing gear lead leg assembly for your Lippert Components Venture 5th Wheel RV landing gear Mounts to the inside of the frame rail Easy to install Includes snap pin Specs
Replaces your power landing gear follow leg and snap pin. Enjoy the power setup while you are out camping and know that your RV or fifth-wheel will be steady and secure.Features: Replaces your follow leg and snap pin for Lippert Components power landing gear Fits standard power landing gear Supports your 5th wheel to prevent unwanted movement Constructed of sturdy
Replaces the heavy duty control leg for your Lippert Control Ground Control 2.0 landing gear.Features: Replaces the driver leg for your Lippert Components Ground Control 2.0 landing gear Specs: Range: 32" Static rating: 8,000 lbs Dynamic rating: 4,000 lbs
Replaces the follow jack from your Stromberg Carlson landing gear. Designed for use with models LG-1, LG-3, and LG-183708. Follow leg connects to the lead jack in your landing gear set with a cross ... , Venture, and Lippert models Connects to the lead jack in your landing gear set with a connecting rod, or cross shaft (not included) Constructed of heavy-duty steel Includes drop leg and cage pin Made in the
Lippert Components Power Landing Gear is standard on most fifth-wheel RVs produced today. This replacement lead landing gear drop leg and snap pin will get you back to camping and enjoying the great
Replaces the OEM follow leg for Keystone Montana fifth wheel landing gear.Features: Replaces the OEM follow leg for Keystone Montana fifth wheel landing gear Includes 1 replacement leg
Replaces the OEM lead leg for Keystone Montana fifth wheel landing gear.Features: Replaces the OEM lead leg for Keystone Montana fifth wheel landing gear Includes 1 replacement leg
Replaces the lead leg in your Stromberg Carlson landing gear set (LG-2 or LG-4). Lead leg has mounting location for crank or motor and connects to the follow jack with a cross shaft (not included). heavy-duty steel Includes drop leg and cage pin Made in the USA Specs: Total lift: 34-7/8" Travel: 19-7/8" Drop leg: 15" Leg length: 33-1/2" Weld stops: Outside to outside: 21-1/2"
Drop leg adds 4-1/2" of additional lift for your Lippert Components power jack (LC285318) with 2" diameter inner tube. Extension can be adjusted in 1-1/2" increments ... Features: Drop leg increases overall extension by 4-1/2" for maximum adjustability Works with Lippert Components power tongue jack (LC285318) with 2" diameter inner tube Zinc-plated finish
Replaces the follow jack from your Stromberg Carlson landing gear. Designed for use with models LG-2 and LG-4. Follow leg connects to the lead jack in your landing gear set with a cross shaft (not ... : 34-7/8" Travel: 19-7/8" Drop leg: 15" Leg length: 33-1/2" Weight capacity: 4,000 lbs
Replaces the landing gear follow leg assembly for your Lippert Components Venture 5th Wheel RV landing gear. Mounts to the inside of the frame rail. Standard length.Features: Replaces the landing gear lead leg assembly for your Lippert Components Venture 5th Wheel RV landing gear Mounts to the inside of the frame rail Easy to install Includes snap pin Specs
Drop leg and pull pin fits most manual A-frame trailer jacks with round outer tubes. Zinc plating resists corrosion.Features: Drop leg and pull pin fits most manual A-frame trailer jacks with round outer tubes Clear zinc-plated finish resists corrosion Specs: Overall height: 13-1/4" Diameter of footplate
Filters
