Use this universal-fit, heavyweight tailgate mat with your DeeZee truck-bed mat to extend bump-and-scratch protection to your vehicle's tailgate. The thick rubber mat will not crack or break - even in extreme temperatures.Features: Extends your DeeZee truck-bed mat coverage to the tailgate Rubber mat safeguards your cargo and protects your tailgate against dents and scratches Non-skid tailgate liner helps to keep your load in place Constructed of extra-thick, high-strength Nyracord rubber, a high strength, cord enhanced, rubber compound Will not crack or break, even in extreme temperatures Resists most chemical spills Fits most truck tailgates with universal design Most full size trucks will not require trimming, however some trimming might be required on some trucks Attaches securely to the tailgate using included black screws - drilling required Keeps the mat in place and prevents slipping Made in the USA Specs: Application: trucks with bare tailgates Spray-in or drop-in liners might require longer self-tapping screws (not included) to install Dimensions: 60" x 19-1/2" Thickness: 3/8" 1-Year limited warranty
This system uses stainless steel cables with sturdy springs to make it easy for you to raise and lower the tailgate on your open utility trailer. Units mount on both sides of the trailer to assist each side of the tailgate evenly, preventing warping.When you lower the tailgate, the majority of the load is taken on by the springs, thereby decreasing the amount of weight that you have to manage. When you raise the tailgate, the springs, which extended as the gate lowered, will begin to retract, thus helping to pull the tailgate back into the upright position, again limiting the weight that you are responsible for lifting.
4-1/4" Round. Weatherproof, incandescent trailer light functions as a stop, tail, and turn signal light. Wedge-base socket protects premium bulb for long life. Tongue-and-groove lens seal. Recessed or flange mount. ... These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.
Replaces the rear tail rail needed to install your Extang Classic Platinum tonneau cover (7705).Features: Replaces the rear tail rail needed to install your Extang Classic Platinum tonneau cover (7705) Installs closest to the tailgate on your truck Made in the USA
7-9/16" x 3-5/16" Oval. Waterproof LED trailer tail lights function as stop, turn, and tail signal lights when properly mounted. Durable polycarbonate housing and lens. Reccessed mount with grommet. ... Recessed-Mount Light Recessed-mount trailer lights install underneath a housing or a grommet (A70GB). These lights will extend into the mounting surface and require that a hole be cut into your trailer.
4-1/4" Round. Weatherproof, incandescent trailer tail light serves as a stop, tail, and turn signal light. Wedge-base socket protects premium bulb for long life. Tongue-and-groove lens seal. ... These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.
6-7/16" x 2-5/16" Oval. 4-Function, waterproof light acts as brake, tail, turn, and backup light. Recessed mount with grommet (sold separately). Accepts 2-prong plug for backup and 3-prong plug for tail light. 16 Diodes.Features: Low-profile trailer tail light serves 4 functions Stop light Tail light Turn signal light Built-in backup light eliminates the need to cut holes in your trailer for 2 lights Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens set inside white lens with red and white LEDs Red lens with red LEDs for tail light Clear lens with white LEDs for backup light Recessed mount with grommet (A70GB - sold separately) Accepts industry-standard plugs (sold separately) 2-Prong plug for backup light function 3-Prong plug for tail light functions DOT compliant Specs: Quantity: 1 light Overall dimensions: 6-7/16" long x 2-5/16" tall x 1-1/2" deep Diodes: 16 Power draw at 12.8 volts: Stop/turn signal light: 0.375 amps Tail light: 0.2 amps Backup light: 0.242 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
4" Round waterproof LED trailer light with 24 diodes provides stop, turn, tail, and back-up functions. GloLight lens creates a solid panel of light. Recessed mount with grommet (sold separately). Weathertight ports accept 2-pin and 3-pin plugs.Features: Combination trailer light serves 4 functions Stop light, turn signal light, tail light, and reverse light GloLight lens creates a solid light pattern with a smooth appearance Sonically sealed, waterproof construction is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Molded plastic housing and durable acrylic lens Red lens over red LEDs White lens over white leds for back-up function Compatible with 12V DC systems Recessed mount with required grommet (sold separately) Weathertight connections accept 3-pin and 2-pin plugs Specs: Dimensions: 4-5/16" diameter x 1-5/8" thick Diodes: 24 Power draw at 12V: Stop/turn light: 0.316 amps Tail light: 0.150 amps Backup: 0.30 amps Lifetime warranty on LEDS Innovative GloLight Design This red LED light serves as a trailer tail light with stop, turn, and tail functions.
... Waterproof LED trailer light serves 3 functions: stop, turn, and tail. Durable polycarbonate housing and lens. Recessed mount with grommet (not included). Accepts standard 3-prong plug. Clear lens with red LEDs.Recessed-Mount Light Recessed-mount trailer lights install with a grommet, which is often sold separately. These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.
6-1/2" x 2-1/4" Oval. Waterproof, incandescent trailer light functions as a stop, tail, and turn signal light. Recessed mount with grommet (sold separately). Accepts 3-prong plug.Features: Combination trailer tail light serves 3 functions when properly mounted Stop light Tail light Turn signal light Sealed housing and lens unit is submersible Durable polycarbonate housing Red lens over incandescent bulb Compatible with 12V DC systems Recessed mount with grommet (421-18 - sold separately) Accepts industry standard 3-prong plug (431-491 or 421-491 - both sold separately) DOT compliant Made in the USA Specs: Overall dimensions: 6-1/2" long x 2-1/4" tall x 2-3/8" deep Bulb type: incandescent Power draw at 12.8V: 2.1 amps 1-Year limited warranty PL-3 Wiring Connection This light has an industry-standard PL-3 connection as pictured above.
6-1/2" x 2-1/4" Oval. LED trailer tail light serves 3 functions: brake, tail, and turn. LumenX optics creates a solid panel of light. Integrated voltage regulation. Recessed mount with grommet (not included). ... Features: Oval trailer tail light serves 3 functions Turn signal light Tail light Brake light LumenX optics creates a solid panel of light that illuminates the entire lens Skirted weld joint provides added protection against moisture LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Regulated design ensures consistent light output and prevents overheating Compatible with 12V DC systems Red lens over white LEDs Recessed mount with grommet (421-18 - sold separately) Mounts in any 360-degree position Accepts industry-standard 3-prong plug (421-491 - sold separately) DOT compliant Meets FMVSS 108 requirements for automotive lighting Made in the USA Specs: Dimensions: 6-1/2" long x 2-1/4" tall x 1-7/16" deep Diodes: 7 Power draw at 12V: Stop/turn: 0.22 amps Tail: 0.01 amps Input voltage: 9V - 16V DC 10-Year limited warranty PL-3 Wiring Connection This light has an industry-standard PL-3 connection as pictured above.
6-1/2" x 2-1/4" Oval. Waterproof, incandescent trailer tail light functions as a stop, turn, and tail light. Durable polycarbonate lens is welded to housing. Flush mount with included grommet and industry-standard 3-prong plug. (1) Bulb.Features: Trailer light provides 3 functions: Stop, turn, and tail light Sealed, waterproof housing and lens unit Red lens over incandescent bulb Compatible with 12V DC systems Flush mount with included grommet Mounts in any 360-degree position Industry-standard 3-prong plug connects light to trailer Made in the USA Specs: Dimensions: 6-1/2" long x 2-1/4" tall x 2-3/8" thick Bulb type: dual-filament Power draw at 12V: Stop/turn: 2.1 amps Tail: 0.59 amps Limited 1-year warranty Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
5-1/2" Round. Incandescent trailer light functions as a stop, tail, and turn signal. Vibar socket absorbs road shock and vibration. Durable stainless-steel housing. Flush mount with built-in flange. 2-Wire design with power leads. (1) 1157 Bulb.These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.
7-7/8" x 3-5/8" Oval. LED trailer tail light serves 3 functions: brake, tail, and turn. LumenX optics creates a solid panel of light. Integrated voltage regulation. Recessed mount with built-in flange. ... Features: Oval trailer tail light serves 3 functions Turn signal light Tail light Brake light LumenX optics creates a solid panel of light that illuminates the entire lens Skirted weld joint provides added protection against moisture LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Regulated design ensures consistent light output and prevents overheating Compatible with 12V DC systems Red lens over white LEDs Recessed mount with built-in plastic flange Accepts industry-standard 3-prong plug (421-491 - sold separately) DOT compliant Meets FMVSS 108 requirements for automotive lighting Made in the USA Specs: Overall dimensions: 7-7/8" long x 3-5/8" tall x 1-7/16" deep Light face dimensions: 6-1/2" long x 2-1/4" tall Diodes: 7 Power draw at 12V: Stop/turn: 0.23 amps Tail: 0.01 amps Input voltage: 9V - 16V DC 10-Year limited warranty PL-3 Wiring Connection This light has an industry-standard PL-3 connection as pictured above.
5-5/16" x 3-7/16" Rectangle. Waterproof trailer light serves 3 functions: brake, tail, and turn signal light. Durable polycarbonate housing and acrylic lens. Recessed mount with grommet (sold separately). Accepts standard 3-prong plug.Recessed-Mount Light Recessed-mount trailer lights install underneath a housing or a grommet (A33GB - sold separately). These lights will extend into the mounting surface and require that a hole be cut into your trailer.
6-1/2" x 2-5/16" Oval. Waterproof, LED trailer tail light provides stop, turn, and tail function. Miro-flex lens increases light output. Durable polycarbonate housing and lens. Recessed mount with grommet (sold separately). 3-Wire design.Recessed-Mount Light Recessed-mount trailer lights install with a grommet, which is often sold separately. These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.
5-1/2" Round. Incandescent trailer light functions as a stop, tail, and turn signal. Vibar socket absorbs road shock and vibration. Durable steel housing. Flush mount with built-in flange. 2-Wire design with power leads. (1) 1157 Bulb.These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.
4-1/4" Round. LED trailer tail light serves 3 functions: brake, tail, and turn. LumenX optics creates a solid panel of light. Integrated voltage regulation. Recessed mount with grommet (sold separately). ... Features: Round LED trailer tail light serves 3 functions Turn signal light Tail light Brake light LumenX optics creates a solid panel of light that illuminates the entire lens Skirted weld joint provides added protection against moisture LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Regulated design ensures consistent light output and prevents overheating Compatible with 12V DC systems Red lens over white LEDs Recessed mount with grommet (426-18 - sold separately) Accepts industry-standard 3-prong plug (431-491 - sold separately) Locking tabs help ensure a secure connection DOT compliant Meets FMVSS 108 requirements for automotive lighting Made in the USA Specs: Dimensions: 4-1/4" long x 1-11/16" deep Diodes: 7 Power draw at 12V: Stop/turn: 0.41 amps Tail: 0.01 amps Input voltage: 9V - 16V DC 10-Year limited warranty PL-3 Wiring Connection This light has an industry-standard PL-3 connection as pictured above.
6-1/2" x 2-1/4" Oval. LED trailer tail light serves 4 functions: brake, tail, turn, and backup light. LumenX optics creates a solid panel of light. Integrated voltage regulation. ... Features: Oval trailer tail light serves 4 functions Turn signal, tail light. and brake light Built-in backup light eliminates the need to cut holes in your trailer for 2 lights Cyclops-style design integrates back-up light into tail light LumenX optics creates a solid panel of light that illuminates the entire lens LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Regulated design ensures consistent light output and prevents overheating Red and clear lens over white LEDs Compatible with 12V DC systems Recessed mount with grommet (421-18 - sold separately) Mounts in any 360-degree position Accepts industry-standard AMP-style plug (sold separately) DOT compliant Meets FMVSS 108 requirements for automotive lighting Made in the USA Specs: Dimensions: 6-1/2" long x 2-1/4" tall x 1-7/16" deep Diodes: 7 Power draw at 12V: Stop/turn: 0.19 amps Tail: 0.02 amps Backup: 0.51 amps Input voltage: 9V - 16V DC 10-Year limited warranty Recessed-Mount Light Recessed-mount trailer lights install with a grommet, which is often sold separately.
5-1/2" Diameter round. LED trailer tail light serves 3 functions: brake, tail, and turn. LumenX optics creates a solid panel of light. Integrated voltage regulation. Recessed mount with built-in flange. ... Features: Round LED trailer tail light serves 3 functions Turn signal light Tail light Brake light LumenX optics creates a solid panel of light that illuminates the entire lens LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Regulated design ensures consistent light output and prevents overheating Red lens over white LEDs Compatible with 12V DC systems Recessed mount with built-in flange Accepts industry-standard 3-prong plug (431-491 - sold separately) Locking tabs help ensure a secure connection DOT compliant Meets FMVSS 108 requirements for automotive lighting Made in the USA Specs: Overall dimensions: 5-1/2" diameter x 1-11/16" deep Light diameter: 4-1/4" Distance between mounting holes (center on center): 4-1/4" Diodes: 7 Power draw at 12V: Stop/turn: 0.41 amps Tail: 0.01 amps Input voltage: 9V - 16V DC 10-Year limited warranty PL-3 Wiring Connection This light has an industry-standard PL-3 connection as pictured above.
4-1/4" Diameter round. Waterproof trailer light functions as a stop, tail, and turn signal light when properly mounted. Shock-proof socket protects incandescent bulb. Flush mount with grommet (sold separately). ... Recessed-Mount Light Recessed-mount trailer lights install underneath a housing or a grommet (A45GB - sold separately). These lights will extend into the mounting surface and require that a hole be cut into your trailer.
6-7/16" x 2-5/16" Oval. Waterproof light serves 4 functions: stop, turn, tail, and backup light. Recessed mount with grommet (sold separately). Accepts 2-prong plug for backup and 3-prong plug for tail light. 16 Diodes.Features: Low-profile trailer tail light serves 4 functions Stop light Tail light Turn signal light Built-in backup light eliminates the need to cut holes in your trailer for 2 lights Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Clear lens with red and white LEDs Red LEDs for tail light White LEDs for backup light Recessed mount with grommet (A70GB - sold separately) Accepts industry-standard plugs (sold separately) 2-Prong plug for backup light function 3-Prong plug for tail light functions DOT compliant Specs: Overall dimensions: 6-7/16" long x 2-5/16" tall x 1-1/2" deep Diodes: 16 Power draw at 12.8 volts: Stop/turn signal light: 0.375 amps Tail light: 0.2 amps Backup light: 0.242 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
4-5/16" Round. Waterproof light serves 4 functions: brake, tail, turn, and backup light. Red lens set inside clear lens. Recessed mount with grommet (sold separately). Accepts 2-prong plug for backup and 3-prong plug for tail light. 16 Diodes.Features: Low-profile, round trailer tail light serves 4 functions Stop light Tail light Turn signal light Built-in backup light eliminates the need to cut holes in your trailer for 2 lights Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens set inside white lens with red and white LEDs Red lens with red LEDs for tail light Clear lens with white LEDs for backup light Recessed mount with grommet and hardware (both sold separately) Light fits into a 4-1/2" diameter hole Accepts industry-standard plugs (sold separately) 2-Prong plug for backup light function 3-Prong plug for tail light functions DOT compliant Specs: Dimensions: 4-5/16" diameter x 1-5/8" deep Diodes: 16 Power draw at 12.8 volts: Stop/turn signal light: 0.265 amps Tail light: 0.24 amps Backup light: 0.3 amps Warranty: Lifetime on LEDs 3-Year limited on housing Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Filters
