Load extender lets you easily haul kayaks, construction materials, and other loads that extend past your truck bed or roof. Height can be adjusted from 15-3/4" from the top of the shank to 57". Width adjusts from 28" to 48".Features: Load extender helps you safely and easily transport lengthy loads with your truck, SUV, or UTV Base slides into your vehicle's hitch receiver Height adjusts to match the height of your truck bed or your roof Bed extender configuration lets you carry extra-long loads that extend past your truck bed High-mount load bar configuration lets you haul cargo above your bed and level with your roof Frees up space in your bed or cargo area for other cargo Adjustable width accommodates different size cargo Arms fold back to provide additional support for your load Can be used as a portable workspace Reflective tape provides increased visibility 4 Quick-release snapper pins make setup simple Sturdy and durable steel construction Black powder coat finish resists corrosion Hitch pin and clip or hitch lock sold separately Specs: Application: 2" x 2" trailer hitch receivers Weight capacity: 350 lbs Length: 53-1/2" from center of hitch pin hole to end of extension Width: Retracted: 28" Extended: 48" Height (when used as a truck bed extender): Retracted: 15-3/4" from top of shank to top of load bar Extended: 23" from top of shank to top of load bar Height (when used as a roof extender): Retracted: 49" from top of shank to top of load bar Extended: 57" from top of shank to top of load bar Hitch pin hole diameter: 5/8" Snapper pin diameter: 1/2"
Carry bigger, longer loads with this hitch-mounted load support. The adjustable-height system includes a 49" long, Vortex Aero crossbar; a tilting mast for easy loading; and a tie-down for transporting a ladder or kayak.Features: Hitch-mounted load bar enables you to load and transport big and long cargo on the roof of your vehicle Works with an existing roof rack to support long loads, such as a kayak or ladder Upright bar tilts away from the rear of your vehicle to assist with loading and unloading Rubber mat provides a soft surface from which you can lean your cargo onto the crossbar from the ground - you never need to lift the entire weight of the kayak (1) 49" Long, aluminum, Vortex Aero crossbar supports your load Rubber strip in channel helps to cushion load and provides slip resistance Telescoping upright bar lets you use the system on vehicles of different heights Nut and bolt on the mast can be loosened and the upright bar repositioned to customize the height of the load support Optional wire lock linchpin is provided to secure the mast in a fixed position 2 Load stops (included) provide lateral support for your gear Adjust along the length of the crossbar to support loads of different widths Position one way for curved loads and another for square cargo 51" Long nylon strap (kayak sling) is included for supporting your watercraft Threaded, anti-wobble hitch bolt and clip (included) secure the carrier in your hitch Reduces vibration and noise in the hitch Steel construction with e-coat and black powder coat finish ensures durability and corrosion resistance Specs: Application: 2" x 2" trailer hitch receivers Weight capacity: 165 lbs Adjustable height range: 42" - 64" Rubber mat dimensions: 23-1/2" wide x 17-1/2" long Distance from center of the hitch pin hole to the back of the upright bar: 8-1/2" 3-Year limited warranty Carry larger and longer cargo on your vehicle's existing roof rack by installing the Rhino-Rack T-Load in your 2-inch trailer hitch.
Adjustable load extender lets you haul extra-long loads at truck bed or cab height. Extension has 11 levels of adjustment to match the height of your cab. 60" crossbar with integrated tie down points. Includes anchor straps.The adjustable Yakima LongArm extends 4' from your 2" hitch to let you transport oversized cargo at either truck bed, bed rail, or cab height. The versatile load extender has a 60" long support bar that's perfect for carrying kayaks, a canoe, ladders, lumber, or any other load that extends past the end of your truck, SUV, or UTV.
The Big Bed Junior lets you safely and easily carry loads that extend past the bed of your truck or UTV. Use it as a bed extender, or use it as a high-mount load bar that lets you haul cargo above your bed and level with the roof of your cab.Just slide the load extender into your 2" x 2" trailer hitch receiver. A hitch pin and clip or a hitch lock (sold separately) is required to secure the Big Bed Junior in your hitch. To use the Big Bed Junior as a bed extender, simply connect the support bar to the short end of the extension bar.
Ultra-lightweight, adjustable load extender lets you haul extra-long loads at truck bed or bed rail height. 60" crossbar with integrated tie down points offer ample space for carrying gear. Rustproof aluminum construction. Folds up for storage.The adjustable Yakima LongArm extends 4' from your 2" hitch to let you transport oversized cargo at either truck bed or bed rail height. The versatile load extender has a 60" long support bar that's perfect for carrying kayaks, a canoe, ladders, lumber, or any other load that extends past the end of your truck, SUV, or UTV.
The Big Bed lets you safely and easily haul lumber, ladders, canoes, kayaks, construction materials, and other long loads that extend past your truck bed. This heavy-duty extension has 3 integrated tie-down points and folds up for storage.Features: Load extender helps you safely and easily transport lengthy items in the bed of your truck, SUV, ATV, or UTV Base slides into your vehicle's hitch and extends out 4' Arms unfold to support your load Adjustable mast lets you set arms at 3 different heights to match bed height Adjusts from 18" to 20" in 1" increments 3 Integrated tie-down points make it simple to secure cargo Folding design allows for easy storage Pin and clip included for securing arm Black powder coated steel is durable and rust resistant Hitch pin and clip (sold separately) is required to hold the extender in the trailer hitch receiver Simple assembly with included hardware Specs: Application: 2" x 2" trailer hitch receivers Weight capacity: 400 lbs Dimensions: In use: 52-1/2" long x 48-1/2" wide Folded up: 52-1/2" long x 5-1/2" wide x 7" tall Weight: 38 lbs 90-Day warranty
Currently the only truck bed extenders we carry are going to be for a 2" receiver like the Erickson Big Bed Load Extender #EM07600. We do have a Titan Hitch Box Extension #RP45018 which you can use to have a custom made extender. This 41"…
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…
It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…
Hey Jairo. So we do not offer a direct replacement for the Norcold N611, but we do have a good replacement option for you. It really comes down to what will fit in your cutout space. Take a look at the Norcold RV Refrigerator w/ Freezer - 8.2 cu ft -…
That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…
The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…
Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…
We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…
You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…
Carry longer loads or create a wheel chock for your dirt bike with these tailgate adjusters. Durable, stainless steel bars replace factory cables and allow you to adjust your tailgate to 8 different angles. Easy installation - no drilling required.Support bars will not work with most after-market slow-release bars and may not work if your truck's tailgate is bent, dented, or misaligned.
Features: Vertical position creates rear of vehicle load bar Horizontal position extends the bed of a truck Integrated side arm helps contain load Anti-wobble bracket reduces movement and noise Powder coated steel construction resists corrosion Includes: Left and right side arms Receiver hitch mast T-crossbar Center mast Hitch pin Anti-wobble bracket Hardware kit Instruction manual Specs: Fits 2" x 2" trailer hitch receivers 8 Height settings - 55-1/2" to 62-1/2" 10 Width settings - 28" to 48" Height from inside top edge of receiver tube to top of crossbar: Lowest position: 15" Highest position: 22" Distance from center of hitch pin hole to outer most edge of extender: 53" Weight: 30 lbs Load capacity: 375 lbs Limited lifetime warranty
Transport your heavy cargo easier with this truck bed and roof load extender. Adjustable height and width allows you to transport different size cargo. Heavy-duty load roller with rubber coated surface prevents scuffs and makes loading cargo easier.Features: Stabilize and transport long or heavy cargo in your truck bed safely Adjustable height and width allows you to transport oversize cargo Vertical position creates rear of vehicle load bar Horizontal position extends the bed of a truck Heavy-duty load roller creates stability while loading your truck Rubber coated surface prevents scuffs and scratches Integrated side arms help contain load and prevent movement Anti-wobble bracket reduces movement and noise Powder coated steel construction resists corrosion Fits 2" x 2" trailer hitch receivers Includes load straps, ratchet tie-downs and safety flag Specs: Dimensions: Length: 53" Width: 28" to 48" Height: 55-1/2" to 62-1/2" Top of receiver tube to top of crossbar height: 13" to 20" Load roller length: 60" Load capacity: 375 lb Weight: 40 lb Limited lifetime warranty
Filters
