Moves your trailer's leaf springs to the top of your axle with this kit. For 2-3/8" diameter axles and works with double-eye leaf springs only.Features: Fits 2-3/8" axle Allows moving trailer leaf springs to top of axle For use with double-eye springs only Sleeve bolts allow the setup to install level Will fit up to 1-5/8" wide leaf springs Includes: (2) Spring Seat (8) Nut (4) U-Bolt (2) Tie Plate 4 Nut couplings U-bolt length: 5-1/8"
You're on the highway when a strong crosswind hits and your trailer starts to sway. It's the kind of trouble that's flipped plenty of rigs. These rubber springs absorb that shove, keeping the trailer steady and your truck in control.Does It Take Long To Install? If you've ever worked with older suspension kits that required drilling or awkward alignment, you know how quickly a simple install could drag out. This one skips all that. The brackets bolt together and clamp the spring in position above the axle.
Moves your trailer's leaf springs to the top of your axle. Works with 3" diameter axles and double-eye leaf springs only.Features: Allows moving leaf trailer springs to top of axle For use with double-eye springs only Fits 3" axle Sleeve bolts allow the setup to install level Includes: (2) Spring Seats (8) 1/2" Nuts (4) Steel spacer nuts (4) 7" Long x 4-1/16" wide x 1/2" diameter U-Bolts (2) Tie Plates
You're on the highway when a strong crosswind hits and your trailer starts to sway. It's the kind of trouble that's flipped plenty of rigs. These rubber springs absorb that shove, keeping the trailer steady and your truck in control.Specs Application: RV trailers with an underslung suspension with leaf spring pack width less than 2-1/4" Dimensions and Weight Capacity: Distance between 2 parallel U-bolts (outside to outside): Less than 3-1/4" Axle diameter range: 2-3/8" to 3" Overall kit height: 6-3/4" Weight capacity: 7,000 lbs Construction and Warranty: Construction: powder coated steel Warranty: limited lifetime Note: Even though you're increasing the spring rate by adding this upgrade, this does not increase the trailer's GTW (Gross Trailer Weight).
... Designed for use with 9,000-lb Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location Includes: (2) 5" Tall front hangers with 5/8" bolt holes (28-68-4) (2) 4-1/2" Tall center hangers with 1" bolt holes (29-39-4) (2) 6-3/8" Tall rear hangers with 5/16" bolt holes (30-68-1) (2) 23-1/2 Long straight equalizers (13-119-03) Allows for 48-1/2" between axles 1" Diameter center hole for mounting to hanger 5/8" Diameter side hole for attaching to spring (4) 3-1/4" Long x 5/16" diameter spring keeper bolts (7-7) (4) 5/16" Diameter locknuts (6-11) (4) 4-1/2" Long x 5/8" diameter spring-eye bolts (7-181) (4) 5/8" Diameter locknuts (6-38LN) (2) 5" Long x 1" diameter equalizer bolts (7-182) (2) 1" Diameter locknuts (6-112) Designed for use on trailers with tandem, 9,000-lb Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 9,000 lbs 37-7/10" 48-1/2" 38-1/10" 4-7/8"
... Designed for use with 9,000-lb Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location Includes: (2) 5" Tall front hangers with 5/8" bolt holes (28-68-4) (2) 4-1/2" Tall center hangers with 1" bolt holes (29-39-4) (2) 6-3/8" Tall rear hangers with 5/16" bolt holes (30-68-1) (2) 13-1/8" Long straight equalizers (13-117-03) Allows for 38" between axles 1" Diameter center hole for mounting to hanger 5/8" Diameter side hole for attaching to spring (4) 3-1/4" Long x 5/16" diameter spring keeper bolts (7-7) (4) 5/16" Diameter locknuts (6-11) (4) 4-1/2" Long x 5/8" diameter spring-eye bolts (7-181) (4) 5/8" Diameter locknuts (6-38LN) (2) 5" Long x 1" diameter equalizer bolts (7-182) (2) 1" Diameter locknuts (6-112) Designed for use on trailers with tandem, 9,000-lb Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 9,000 lbs 32-2/5" 38" 32-9/10" 4-7/8"
To replace the Duo Therm AC unit on your 2006 Holiday Rambler Ambassador I recommend the Furrion Chill HE RV Air Conditioner System - Manual - 15,000 Btu - White #FR92PR. The #FR92PR AC unit is a perfect replacement for your older Duo Therm unit and…
Since the axle on your trailer is 2-3/8 inches diameter you will need the over/under conversion kit #K71-384-00. I have included a link to a video review of this part for you.
Hey Greg, thanks for the information. To replace your equalizer you'll want the Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 6-1/4" Long - 3/4" Center Hole item #TREQ458. From the way you described yours this matches your…
Hi Bruce, To lift your trailer we'll first need to check of the suspension and see if you have torsion axles or a leaf spring suspension. If you have torsion axles then I'll need to see the axle tag in order to determine what you have so I…
Hi Justin; do the leaf springs run under your axle (underslung) or are they sitting on top of the axle (overslung)? If you have the underslung configuration you can use the Dexter Trailer Springs Over-Under Conversion Kit #K71-384-00 you were looking…
It's not a stupid question, it's a perfectly logical one but you should not flip the Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles #7685269 to get rise as this was not the intended design as it is an underslung axle with spring…
The Dexter Trailer Springs Over-Under Conversion Kit #K71-384-00 will work with your 2021 Forest River Gray Wolf 26DBH travel trailer as long as you have underslung double eye leaf springs and 2-3/8" diameter axles. If you have 3" axles…
Thank you for providing that picture and helpful information. The correct lift kit for a 3,000 lb Dexter #10 torsion axle like yours is the #K71-707-01. This comes with all of the necessary hardware and will give you a 2-5/8" lift.
If your Forest River Mini-Lite 1906 has a single torsion axle, you will be able to use the Axle Riser Kit- Single Square Torsion Axles #LC382741; however, if you have a Dexter Torflex #10 axle, you need the #K71-707-01. You'll want to check the…
I do have all of the components you will need to flip the axle on your tent trailer but there is not an all inclusive kit per se to do so. However, the kits are pretty basic as all they include are u-bolts, tie plates, and spring seats. For your…
For your double eye springs that are 25-1/2 inches, it is likely your hangers are 29-1/2 inches apart on center and your springs most likely were originally 25-1/4 inches as they will stretch slightly over time. For instance if you were to use 25-1/4…
The dimensions I found for your Dometic RM1350 on Dometic's site show it being 64.26" T x 33.69" W x 29.50" D. the closest match to these dimensions we carry is the Everchill RV Refrigerator w/ Freezer Drawer - 16 Cu Ft - 12V -…
... Designed for use with 10,000-lb to 15,000-lb, heavy-duty Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location Includes: (2) 6-1/4" Tall front hangers with 1" bolt holes (28-67-4) (2) 4-1/8" Tall center hangers with 1-1/8" bolt holes (29-43-2) (2) 7-11/16" Tall rear hangers with 1/2" bolt holes (30-66-1) (1) 24-3/4" Long, left-hand equalizer (13-109-3LH) Allows for 48-1/2" between axles (1) 24-3/4" Long, right-hand equalizer (13-109-4RH) Allows for 48-1/2" between axles (4) 4-1/2" Long x 1/2" diameter spring keeper bolts (7-95) (4) 1/2" Diameter locknuts (6-46) (4) 5-1/2" Long x 1" diameter spring-eye bolts (7-169) (4) 1" Diameter locknuts (6-112) (2) 6" Long x 1-1/8" diameter equalizer bolts (7-170) (2) 1-1/8" Diameter locknuts (6-72) Designed for use on trailers with tandem, 10,000-lb to 15,000-lb, heavy-duty Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 10,000 lbs - 15,000 lbs 38-1/3" 48-1/2" 37-7/10" 5-1/2"
... Designed for use with 10,000-lb, general-duty Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location Includes: (2) 5-1/4" Tall front hangers with 3/4" bolt holes (28-74-2) (2) 4-1/2" Tall center hangers with 1" bolt holes (29-42-2) (2) 4-1/2" Tall rear hangers (30-61-1) (2) 24-5/8" Long straight equalizers (13-141-3) Allows for 48-1/2" between axles 1" Diameter center hole for mounting to hanger 3/4" Diameter side hole for attaching to spring (4) 4-1/2" Long x 3/4" diameter spring-eye bolts (7-264) (4) 3/4" Diameter locknuts (6-113) (2) 5-1/4" Long x 1" diameter equalizer bolts (7-169) (2) 1" Diameter locknuts (6-112) Designed for use on trailers with tandem, 10,000-lb, general-duty Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 10,000 lbs 38-1/3" 48-1/2" 37-7/10" 5"
... Designed for use with 10,000-lb, general-duty Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location Includes: (2) 5-1/4" Tall front hangers with 3/4" bolt holes (28-74-2) (2) 4-1/2" Tall center hangers with 1" bolt holes (29-42-2) (2) 4-1/2" Tall rear hangers (30-61-1) (2) 18-3/8" Long straight equalizers (13-140-3) Allows for 42-1/4" between axles 1" Diameter center hole for mounting to hanger 3/4" Diameter side hole for attaching to spring (4) 4-1/2" Long x 3/4" diameter spring-eye bolts (7-264) (4) 3/4" Diameter locknuts (6-113) (2) 5-1/4" Long x 1" diameter equalizer bolts (7-169) (2) 1" Diameter locknuts (6-112) Designed for use on trailers with tandem, 10,000-lb, general-duty Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 10,000 lbs 35-1/10" 42-1/4" 34-2/3" 5"
... Designed for use with 10,000-lb to 15,000-lb, heavy-duty Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location Includes: (2) 6-1/4" Tall front hangers with 1" bolt holes (28-67-4) (2) 4-1/8" Tall center hangers with 1-1/8" bolt holes (29-43-2) (2) 7-11/16" Tall rear hangers with 1/2" bolt holes (30-66-1) (1) 18-3/8" Long, left-hand equalizer (13-108-3LH) Allows for 42-1/4" between axles (1) 18-3/8" Long, right-hand equalizer (13-108-4RH) Allows for 42-1/4" between axles (4) 4-1/2" Long x 1/2" diameter spring keeper bolts (7-95) (4) 1/2" Diameter locknuts (6-46) (4) 5-1/2" Long x 1" diameter spring-eye bolts (7-169) (4) 1" Diameter locknuts (6-112) (2) 6" Long x 1-1/8" diameter equalizer bolts (7-170) (2) 1-1/8" Diameter locknuts (6-72) Designed for use on trailers with tandem, 10,000-lb to 15,000-lb, heavy-duty Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 10,000 lbs - 15,000 lbs 35-1/10" 42-1/4" 34-2/3" 5-1/2"
... Designed for use with 10,000-lb, general-duty Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location Includes: (2) 5-1/4" Tall front hangers with 3/4" bolt holes (28-74-2) (2) 4-1/2" Tall center hangers with 1" bolt holes (29-42-2) (2) 4-1/2" Tall rear hangers (30-61-1) (2) 14-1/4" Long straight equalizers (13-139-3) Allows for 38" between axles 1" Diameter center hole for mounting to hanger 3/4" Diameter side hole for attaching to spring (4) 4-1/2" Long x 3/4" diameter spring-eye bolts (7-264) (4) 3/4" Diameter locknuts (6-113) (2) 5-1/4" Long x 1" diameter equalizer bolts (7-169) (2) 1" Diameter locknuts (6-112) Designed for use on trailers with tandem, 10,000-lb, general-duty Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 10,000 lbs 33" 38" 32-3/8" 5"
... Designed for use with 9,000-lb Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location Includes: (2) 5" Tall front hangers with 5/8" bolt holes (28-68-4) (2) 4-1/2" Tall center hangers with 1" bolt holes (29-39-4) (2) 6-3/8" Tall rear hangers with 5/16" bolt holes (30-68-1) (2) 17-3/8" Long straight equalizers (13-118-03) Allows for 42-1/4" between axles 1" Diameter center hole for mounting to hanger 5/8" Diameter side hole for attaching to spring (4) 3-1/4" Long x 5/16" diameter spring keeper bolts (7-7) (4) 5/16" Diameter locknuts (6-11) (4) 4-1/2" Long x 5/8" diameter spring-eye bolts (7-181) (4) 5/8" Diameter locknuts (6-38LN) (2) 5" Long x 1" diameter equalizer bolts (7-182) (2) 1" Diameter locknuts (6-112) Designed for use on trailers with tandem, 9,000-lb Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 9,000 lbs 34-2/3" 42-1/4" 35" 4-7/8"
... Designed for use with 10,000-lb to 15,000-lb, heavy-duty Dexter axles.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location Includes: (2) 6-1/4" Tall front hangers with 1" bolt holes (28-67-4) (2) 4-1/8" Tall center hangers with 1-1/8" bolt holes (29-43-2) (2) 7-11/16" Tall rear hangers with 1/2" bolt holes (30-66-1) (1) 14-1/4" Long, left-hand equalizer (13-107-7LH) Allows for 38" between axles (1) 14-1/4" Long, right-hand equalizer (13-107-8RH) Allows for 38" between axles (4) 4-1/2" Long x 1/2" diameter spring keeper bolts (7-95) (4) 1/2" Diameter locknuts (6-46) (4) 5-1/2" Long x 1" diameter spring-eye bolts (7-169) (4) 1" Diameter locknuts (6-112) (2) 6" Long x 1-1/8" diameter equalizer bolts (7-170) (2) 1-1/8" Diameter locknuts (6-72) Designed for use on trailers with tandem, 10,000-lb to 15,000-lb, heavy-duty Dexter axles Does not include components for mounting axle to springs Axle Capacity A - Distance Between Front and Center Hangers B - Distance Between U-Bolts C - Distance Between Center and Rear Hangers D - Distance Between Center of Axle and Trailer Frame 10,000 lbs - 15,000 lbs 33" 38" 32-2/5" 5-1/2"
Replaces the U-bolts needed to install your axle on your RV or trailer. Fits 3" axle tubes.Features: Replaces the U-bolts needed to install your axle on your RV or trailer Fits 3" axle tubes Includes: (2) 4" Wide x 6-1/8" long x 7/8" thick U-bolt plates (4) 3" U-bolts (8) 3/8"-24 Flange nuts
Add these 2 heavy-duty shock absorbers to your Roadmaster Comfort Ride kit for tandem-axle trailers (RM-2450) to upgrade the suspension on your triple-axle trailer. Mounting brackets and hardware are included. ... Features: Add-on shock kit adapts your Roadmaster Comfort Ride system (RM-2450) for use with a triple-axle trailer Bolt-on installation Included tie plates with extension pieces replace your existing U-bolt plates Upper brackets mount on trailer frame with included hardware Shocks attach to tie plate extensions and to upper brackets to help dampen movement of axle Limited Lifetime Warranty Specs: Application: triple-axle trailers with leaf spring suspensions Axle size: 2-3/8" diameter (typical 3,500-lb axle) Shock length: Extended: 17-1/2" Compressed: 11-1/2" Quantity: 2 shocks 1-Year warranty
Add these 2 heavy-duty shock absorbers to your Roadmaster Comfort Ride kit for tandem-axle trailers (RM-2460) to upgrade the suspension on your triple-axle trailer. Mounting brackets and hardware are included. ... Features: Add-on shock kit adapts your Roadmaster Comfort Ride system (RM-2460) for use with a triple-axle trailer Bolt-on installation Included tie plates with extension pieces replace your existing U-bolt plates Upper brackets mount on trailer frame with included hardware Shocks attach to tie plate extensions and to upper brackets to help dampen movement of axle Specs: Application: triple-axle trailers with leaf spring suspensions Axle size: 3" diameter (typical 5,200-lb to 7,000-lb axle) Shock length: Extended: 17-1/2" Compressed: 11-1/2" Quantity: 2 shocks 1-Year warranty
Add these 2 heavy-duty shock absorbers to your Roadmaster Comfort Ride kit for tandem-axle trailers (RM-2470) to upgrade the suspension on your triple-axle trailer. Mounting brackets and hardware are included. ... Features: Add-on shock kit adapts your Roadmaster Comfort Ride system (RM-2470) for use with a triple-axle trailer Bolt-on installation Included tie plates with extension pieces replace your existing U-bolt plates Upper brackets mount on trailer frame with included hardware Shocks attach to tie plate extensions and to upper brackets to help dampen movement of axle Limited Lifetime Warranty Specs: Application: triple-axle trailers with leaf spring suspensions Axle size: 3-1/2" diameter (typical 8,000-lb axle) Shock length: Extended: 17-1/2" Compressed: 11-1/2" Quantity: 2 shocks 1-Year warranty
Suspension kit includes equalizers and hardware for attaching 4 leaf springs to the hangers on your trailer's frame. Works with 33" axle spacing.Features: Suspension kit lets you attach 4 leaf springs (sold separately) to your trailer frame Works with 1-3/4" wide double-eye springs Hangers sold separately Equalizers transfer load and impacts from one axle to another by permitting movement between the axles Springs attach to ends of equalizers with included hardware Bolts secure equalizers and springs to the hangers on your trailer Shackle link assemblies with bolts secure springs to equalizers Kit includes: 2 Equalizers 8 Shackle straps 14 Bolts with locknuts Specs: Application: tandem-axle trailer with 1-3/4" wide double-eye springs Axle spacing: 33" Equalizer dimensions: Distance between outer shackle bolt holes (center on center): 5-3/4" Distance between hanger bolt hole and shackle bolt hole (center on center): 2-7/8" Height of side bolt hole to hanger bolt hole: 2" Shackle strap length: 2-1/4" from center hole to center hole Bolt dimensions: 3" long x 9/16" diameter Note: Locknuts are tapered to prevent vibrational loosening.
... Components for mounting axle to springs sold separately.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location based on type of leaf springs Achieves 4-1/2" or 4-3/4" clearance between trailer frame and axle, depending on axle size Includes: (2) 3-3/4" Tall front hangers (2) 3-3/8" Tall center hangers (2) 5-1/6" Tall rear hangers (2) 12" Long straight equalizers 7/8" Diameter center hole for mounting to hanger 9/16" Diameter side hole for attaching to spring (8) 3-1/2" Long x 9/16" diameter shackle bolts (8) 9/16" Diameter locknuts (2) 4-11/16" Long x 7/8" diameter equalizer bolts (2) 7/8" Diameter castle nuts (2) 2-1/4" Long cotter pins Designed for use on trailers with tandem, 3,500-lb to 8,000-lb axles Does not include components for mounting axle to springs Leaf Springs A - Distance Between Front and Center Hangers B - Distance Between Center and Rear Hangers C - Distance Between U-Bolts D - Distance Between Center of Axle and Trailer Frame Axle Diameter SP-160275 (E5226) 29-3/4" 29-3/4" 34-1/2" 4-3/4" 3" (typical 5,200-lb to 7,200-lb trailer axle) SP-230275 (803T3) SP-232275 (1203T3) SP-285275 (1403T3) 28-1/2" 29-1/2" 33" 4-1/2" 3" (typical 5,200-lb to 7,200-lb trailer axle) SP-161275 (E5115) 32" 32" 36-3/4" 4-3/4" 3" (typical 5,200-lb to 7,200-lb trailer axle) Note: The above table provides an indication of where the included hangers can be mounted on your trailer.
Suspension kit includes equalizers and hardware for attaching 4 leaf springs to the hangers on your trailer's frame. Works with 33" axle spacing.Features: Suspension kit lets you attach 4 leaf springs (sold separately) to your trailer frame Works with 1-3/4" wide double-eye springs Equalizers transfer load and impacts from one axle to another by permitting movement between the axles Springs attach to ends of equalizers with included hardware Bolts secure equalizers and springs to the hangers on your trailer Shackle link assemblies with bolts secure springs to equalizers Kit includes: 2 Equalizers 6 Hangers 8 Shackle straps 14 Bolts with locknuts Specs: Application: tandem-axle trailer with 1-3/4" wide double-eye springs Axle spacing: 33" Equalizer dimensions: 4-1/4" tall 7-3/4" Long from center hole to center hole Shackle strap length: 3-1/8" from center hole to center hole Hanger height: 4" Bolt dimensions: 3-9/16" long x 9/16" diameter
... Provides 4-1/2" to 5" of clearance depending on axle size.Features: Suspension kit lets you attach 4 double-eye leaf springs (sold separately) to your trailer frame Use table below to determine hanger location based on type of leaf springs Does not include components for mounting axle to springs Front and rear hangers provide secure connection points for springs Center hangers suspend equalizers Curved equalizers evenly distribute impacts across suspension for smooth ride Shackle straps allow springs to pivot within suspension Kit includes 6 Hangers 2 Equalizers 8 Shackle straps 14 Shackle bolts 14 Locknuts Installation of hangers requires welding Specs: Application: 2,000-lb to 7,000-lb tandem-axle trailers with 1-3/4" wide double-eye springs Clearance between trailer frame and axle (depending on axle size): 4-1/2" to 5" Hanger height (from center of hole to top of hanger): 3-1/4" Equalizer length: 7-3/4" from center of bolt hole to center of center of bolt hole Shackle strap length (from center of hole to center of hole): 2-5/8" Shackle bolt dimensions: 3" long x 9/16" diameter Leaf Springs A - Distance Between Front and Center Hangers B - Distance Between Center and Rear Hangers C - Distance Between U-Bolts D - Distance Between Center of Axle and Trailer Frame Axle Diameter SP-169275 (1020) 24-3/4" 24-3/4" 29-1/2" 5" 1-3/4" (typical 2,000-lb trailer axle) SP-219275 (PR722) SP-220275 (PR3) SP-218275 (PR4) SP-212275 (PR4B) SP-111275 (PR5) SP-198275 (PR6) 29-1/2" 29-1/2" 33-1/2" 4-1/2" 3" (typical 5,200-lb to 7,200-lb trailer axle) Note: The above table provides an indication of where the included hangers can be mounted on your trailer.
... Components for mounting axle to springs sold separately.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location based on type of leaf springs Achieves 3-1/2" or 3-3/4" clearance between trailer frame and axle, depending on axle size Includes: (4) 1-1/2" Tall front and rear hangers (2) 2-1/2" Tall center hangers (2) 7-3/4" Long curved equalizers (8) 2-5/8" Long shackle straps (14) 3" Long x 9/16" diameter shackle bolts (14) 9/16" Diameter locknuts Designed for use on trailers with tandem, 2,000-lb to 7,000-lb axles Does not include components for mounting axle to springs Leaf Springs A - Distance Between Front and Center Hangers B - Distance Between Center and Rear Hangers C - Distance Between U-Bolts D - Distance Between Center of Axle and Trailer Frame Axle Diameter SP-169275 (1020) 24-3/4" 24-3/4" 30" 3-3/4" 1-3/4" (typical 2,000-lb trailer axle) SP-219275 (PR722) SP-220275 (PR3) SP-218275 (PR4) SP-212275 (PR4B) SP-111275 (PR5) SP-198275 (PR6) 29-1/2" 29-1/2" 33-1/2" 3-1/2" 2-3/8" (typical 3,500-lb trailer axle) Note: The above table provides an indication of where the included hangers can be mounted on your trailer.
Kit includes 3-1/4" tall front hangers, 1-1/4" tall rear hangers, 3-1/8" shackle straps and hardware for mounting springs to your 2,000-lb to 7,000-lb, single-axle trailer frame. ... Features: Attaches 2 leaf springs (sold separately) to your trailer frame Use table below to determine hanger location based on type of leaf springs Achieves 5" or 5-1/2" clearance between trailer frame and axle, depending on axle size Includes: (2) 3-1/4" Tall front hangers (2) 1-1/4" Tall rear hangers (4) 3-1/8" Long shackle straps (6) 3" Long x 9/16" diameter shackle bolts (6) 9/16" Diameter locknuts Designed for use on trailers with single, 2,000-lb to 7,000-lb axles Does not include components for mounting axle to springs Leaf Springs A - Distance Between Hangers B - Distance Between Center of Axle and Trailer Frame Axle Diameter SP-169275 (1020) 20" 5-1/2" 1-3/4" (typical 2,000-lb trailer axle) SP-219275 (PR722) SP-220275 (PR3) SP-218275 (PR4) SP-212275 (PR4B) SP-111275 (PR5) SP-198275 (PR6) 24-7/8" 5" 2-3/8" (typical 3,500-lb trailer axle) Note: The above table provides an indication of where the included hangers can be mounted on your trailer.
... Components for mounting axle to springs sold separately.Features: Attaches 4 leaf springs (sold separately) to your trailer frame Includes: (4) 2-1/2" Tall hangers (2) 4-1/4" Tall hangers (2) 7-3/4" Long curved equalizers (8) 2-5/8" Long shackle straps (14) 3" Long x 9/16" diameter shackle bolts (14) 9/16" Diameter locknuts Designed for use on trailers with tandem, 2,000-lb to 7,000-lb axles Does not include components for mounting axle to springs
Filters
