Recommended Equalizer w/ a 6-1/4" Center Bolt to Center Bolt Spacing
Updated 07/08/2025 | Published 06/16/2025 >
Question:
Im looking for new trailer suspension components. The trailer is quite old ~80s and is in need of all new equalizers, shackles, and perhaps leaf springs if we could get them to avoid pressing out bushings. The equalizer measures 2.0 from top to bottom measure from center bolts and the two lower bolts measure 6.25, It is I believe a 1.5 thick unit. Leaf springs still installed are 3-leafs with ~ 27 inches between the two eyes. I can send a photo if that would help, thanks!
asked by: Greg B
Expert Reply:
Hey Greg, thanks for the information. To replace your equalizer you'll want the Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 6-1/4" Long - 3/4" Center Hole item # TREQ458. From the way you described yours this matches your dimensions perfectly. It's sold individually.
In order to recommend the right shackle and wet bolt kit, I'll need you to measure the distance between the bolt holes on one of the shackles.
How did you get your 27" measurement on the leaf springs? A used spring is going to stretch out quite a bit over years of us. We recommend jacking the trailer up and getting the weight off of one side then measuring the eye to eye distance.
You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them.
Product Page this Question was Asked From
Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 6-1/4" Long - 3/4" Center Hole
- Trailer Suspension Parts
- Standard Equalizer
- Camper
- Car Hauler
- Utility Trailer
- Double Eye Springs
- 6-1/4 Inch Long
- Tandem Axle
- Triple Axle
- TruRyde
more information >
Continue Researching
- Search Results: trailer equalizer
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Search Results: equalizer
- Search Results: equalizer hanger
- Search Results: tandem axle hanger kit
- Search Results: 5 3/4 equalizer
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
- Search Results: wheel spacer
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Shop: RV Designer Self-Closing Hinge - Nickel
- Video: Review of Dexter Trailer Suspension Parts - Suspension Bolts - DX57VC
- Search Results: dexter trailer suspension parts
- Shop: CE Smith Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - Galvanized
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Shop: Dexter Equalizer w/ Nylatron Bushings for 1-3/4" Double-Eye Springs - 5-11/16" Long
- Shop: RV Roof Membrane
- Video: A Closer Look at the Locknut for Trailer Shackle Bolt
- Video: Review of RV Ride Control Trailer Suspension Parts - Alignment and Lift Kits - RR23QX
- Video: A Closer Look at the Torflex Lift Kit
- Video: Installing the Dexter Torflex Lift Kit
- Video: Complete Breakdown of the Dexter Trailer Springs Over-Under Conversion Kit
- Video: Dexstar Dual Wheel with Offset Spec Review
- Q&A: How to Measure Replacement Shackles for Single Axle Trailer
- Q&A: How to Pick Out Correct Shackle Length for Trailer Suspension
- Q&A: Cushioned Equalizer Recommendation for Replacement for EQ356
- Q&A: Availability of a Trailer Suspension Equalizer Kit With 6-1/4 Inch Long Equalizers
- Q&A: Will The Trailer Ride Height Be Affected By Installing The MORryde Rubber Equalizers # MR87Z?
- Q&A: Is There Any Advantage In Using a Single Leaf Spring Instead of a Stacked Leaf Spring
- Q&A: Recommended Equalizer Upgrade for Tandem Axle Trailer with EQ356 Equalizers
- Shop: Tool Box



Greg B.
7/7/2025
Jerred, Finally got outside to work on the trailer in between heat waves. The shackles measure 2.75" between holes as I was able to pull them off. I will need new bushings for the leaf eyes and at this point I'd like to try Nylon/maintenance free. The leaf spring measurement were taken with the load off of them and I verified 27" between eyes.