This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Hi Brian! Yes, the Hydrastar Marine Electric Over Hydraulic Actuator for Disc Brakes #HS381-8067 is compatible with the OEM brake controller on your 2025 Ram 1500. The brake actuator works with Ram trucks 2010-Current. See the attached chart. What…
It looks like you have a Kwikee 24/25 Series Electric Step. In which case, if you need a new motor you'd actually want to go with the Replacement Motor with Gear and Table for Kwikee 24 and 25 Series Electric RV Steps part #LC369529. You…
Hey Walter, I checked with Curt and the RVI Series 4 part #RVI44FR that you referenced showing a Code 4 is related to exposure to cold weather and it's causing some circuit board issues. The solution is to let it sit indoors to warm up for 15 to…
The Curt Class V Trailer Hitch, #C15313, was designed to fit the 2500 HD models of the 2005 Chevrolet Silverado, but it has not been confirmed to fit the cab and chassis models like your service body truck. The important factor to consider is the…
I went out into our warehouse and measured both the Curt Hitches you referenced #C15312 and #C15313. THe #C15312 measures 2-3/4 inches from the mounting flange down to the hitch opening and the #C15313 measures 5-5/8 inches.
I called my contact at Curt to confirm these measurements on the Curt #C15313 trailer hitch for you. The width of the hitch from center to center of the bolt holes measures 38-7/8 inches. The top of the receiver to the mounting holes measures 5-7/16…
I have included a link to a video on adjusting self-adjusting brakes. Basically there is a device on the adjustment wheel on these brakes that prevents the shoes from adjusting back inward. You have to sort of move that out of the way to be able to…
Self-adjusting brakes #AKEBRK-7-SA do not require that you travel in reverse for them to adjust. They can adjust themselves going forward or backward. Keep in mind that even self-adjusting brakes require 1 initial adjustment. You could just install…
If you are looking for a trailer hitch to mount on your RV then the highest rated capacity is the Curt Trailer Hitches parts #C13702 and #C13701 which are both rated for a max of 6,000 lbs towing when a weight distribution (WD) system is used. These…
I spoke to my contact at Curt to get the measurements you requested. He said that from the top of the cross tube to the top of the mounting plate the Curt hitch #C13701 measures 1-1/2 inches.
The 052-003-00 number on your current shock is the part number from Dexter Axle. We don't carry the direct replacement but if the specs match for the Lippert Standard Replacement Shock #LC283271 and the axle this is being applied to is a…
You should be able to change out the backing plates, hubs, and brakes on your trailer so you can upgrade to higher rated assemblies, but I do recommend checking a couple things on your tow vehicle first. It's possible that your weak braking is…
Filters
