Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. The durable jack screw offers increased strength. Get maximum lifting power in low gear and fast cranking in high gear.Features: 2-Speedjack lets you raise and lower your trailer Low gear offers full lifting power High gear provides ultimate speed Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the side Durable 1-1/4" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle has curved edges - no sharp ends Handle can be secured for travel with included weld-on clip Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Total lift: 25-7/8" Screw travel: 12-3/8" Drop leg travel: 13-1/2" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Heavy-duty 25K capacity, 2-speedjack is perfect for any demanding job that requires a gooseneck trailer. Retracted height is 8-1/4" and extended height is 18", plus 8" of drop leg travel using the plunger pin.Features: Industrial-sized jack lets you raise and lower your gooseneck trailer Ideal for demanding agricultural, construction, and industrial work Companion square jack (TJD-25100) and cross shaft sold separately Standard 2-Speed gear design Drop leg with spring return increases overall extension for maximum adjustability Side-positioned plunger is easier to align than a pin and clip (and you won't pinch your fingers) Hands-free spring return lets you retract the leg using your foot Round footplate minimizes sinking in soft ground Easy maintenance Built-in grease zerks Strong, stable, durable, industrial-sized tubing Black painted inner and outer tubes Includes sidewind handle Weld on installation Specs: 2-Speed gear: High gear: 1" every 4-1/2 turns Low gear: 1" every 34-1/2 turns Height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Travel: 13" Drop leg travel: 11-1/2" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" from center of hole to center of hole Outer tube width: 4-3/8" Inner tube width: 4" Rod shaft diameter: 1" Outer tube length: 25" Footplate diameter: 9-7/8" Lift capacity: 25,000 lbs 1-Year warranty
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. Get maximum lifting power in low gear and fast cranking in high gear. Sidewind crank (TJD-12000-HD) sold separately.Features: 2-Speedjack lets you raise and lower your trailer Low gear offers full lifting power High gear provides ultimate speed Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the front Durable 1-1/4" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Total lift: 25-7/8" Screw travel: 12-3/8" Drop leg travel: 13-1/2" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
Power Stabilizer Jacks are an affordable way to upgrade power leveling and easily bolt-on to your existing frame. New motor is 2x faster than previous versions. ... Features: Power stabilizer jacks provide an easy way to upgrad to power leveling New motor is 2x faster than previous versions Legs extend up to 30" for quick leveling New embossed legs add strength Automatically adjusts to the terrain so uneven ground is not a problem Motor indepently controls both legs for more control Switch kit allows you to easily retract and extend the jacks with the flip of a switch Heavy-gauge steel construction ensures durability Lighter weight than previous models Black powder coat finish stands up to the elements and resists corrosion Front and rear mounting applications available for maximum stability Specs: Overall dimensions: 78" long x 20" wide x 4-3/4" tall Lift: 30" Motor: 12-volt DC Mounting hole spacing: 68-11/16" from center-hole to center-hole Includes a 6 amp auto-reset circuit breaker 1-Year limited warranty
Heavy-duty 25K capacity, 2-speedjack is perfect for any demanding job that requires a gooseneck trailer. Retracted height is 8-1/4" and extended height is 18", plus 8" of drop leg travel using the plunger pin.Features: Industrial-sized jack lets you raise and lower your gooseneck trailer Ideal for demanding agricultural, construction, and industrial work Companion square jack (TJD-25100) and cross shaft sold separately Standard 2-Speed gear design Drop leg with spring return increases overall extension for maximum adjustability Side-positioned plunger is easier to align than a pin and clip (and you won't pinch your fingers) Hands-free spring return lets you retract the leg using your foot Round footplate minimizes sinking in soft ground Easy maintenance Built-in grease zerks Strong, stable, durable, industrial-sized tubing Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Weld on installation Specs: 2-Speed gear: High gear: 1" every 4-1/2 turns Low gear: 1" every 34-1/2 turns Height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Travel: 13" Drop leg travel: 11-1/2" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" from center of hole to center of hole Outer tube width: 4-3/8" Inner tube width: 4" Rod shaft diameter: 1" Outer tube length: 25" Footplate diameter: 9-7/8" Lift capacity: 25,000 lbs 1-Year warranty
Pull the side-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. Get maximum lifting power in low gear and fast cranking in high gear. Sidewind crank (TJD-12000-HD) sold separately.Features: 2-Speedjack lets you raise and lower your trailer Low gear offers full lifting power High gear provides ultimate speed Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the side Durable 1-1/4" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle (TJD-12000-HD) sold separately Handle can be secured for travel with weld-on clip (TJD-12000-CLIP - sold separately) Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Total lift: 25-7/8" Screw travel: 12-3/8" Drop leg travel: 13-1/2" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
With a front-facing plunger pin and 29-1/2" retracted height, this jack offers maximum lifting power in low gear and the fastest cranking in its weight class in high gear. ... Features: 2-Speed design makes cranking faster and easier Low gear: full lifting power offers smooth and easy ratio of 1" every 27 turns High gear: ultimate speed with 1" for every 9 turns - fastest in the weight class Ideal for standard agricultural, construction and industrial trailer applications Planetary gearbox makes switching gears fast and easy No need to reposition crank Eliminates need for spacers by fitting within the jack's width profile Smooth and simple operation Specially engineered alloys provide strength and stability Painted surfaces include both inner and outer tubes and drop leg Drop leg with non-spring return increases overall extension for maximum adjustability "Non-spring return" means user will need to physically lift jack at the foot to return to up position Plunger pin positioned to the front Standard footplate included Sidewind crank not included Specs: Bracket height: 29-1/2" Retracted 42" Extended Total lift: 26" Travel: 12-1/2" Drop leg: 13-1/2" Tubing width: 4" Lift capacity: 10,000 lbs Static capacity: 12,000 lbs Limited 5-year warranty
This dual-pin, two-speedjack from RAM delivers 20,000 lb of static support and 12,000 lb of lift. Its spring-return drop leg, 4-3/8" tubing, and 9" x 9" footplate provide stable, heavy-duty performance.Features: Two-speed gearbox makes raising or lowering heavy loads faster and easier Dual-pin, spring-return drop leg lets you quickly set height without cranking Heavy-duty square tubing provides stability under maximum load Large footplate keeps the jack steady and drains water away Grease fittings and brass bushings reduce wear and simplify maintenance Black powder coat finish protects against rust and corrosion Handle assembly included for smooth sidewind operation Specs: Jack type: Two-speed, sidewind Static capacity: 20,000 lb Lift capacity: 12,000 lb Drop leg: Spring-return, dual-pin Outer tube: 4-3/8" square Travel: 26-1/2" total Screw travel: 13-1/2" Drop leg travel: 13" Footplate: 9" x 9" with drainage Finish: Black powder coat Mount: Weld-on
Pull the side-facing plunger pins on these heavy-duty jacks to release the drop legs for an extra 8" of lift. Retracted height is 8-1/4" and extended height is 18". Get maximum lifting power in low gear and fast cranking in high gear.Features: Landing gear set lets you raise and lower your trailer Ideal for standard agricultural, construction, and industrial trailer applications 2Speeds make cranking faster and easier Low gear offers full lifting power at a ratio of 1" every 34-1/2 turns High gear provides ultimate speed with 1" for every 4-1/2 turns Traditional gearbox requires you to reposition crank to switch gears Drop legs with spring return increase overall extension for maximum adjustability Plunger pins positioned to the side Footplates minimize sinking in soft ground Landing gear welds onto trailer frame Sidewind handle and connecting rod included Specs: Height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Travel: 13" Drop leg travel: 11-1/2" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" from center of hole to center of hole Outer tube width: 4-3/8" Inner tube width: 4" Rod shaft diameter: 1" Outer tube length: 25" Footplate diameter: 9-7/8" Lift capacity: 50,000 lbs 25,000 lbs per jack Note: Landing gear is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
Replacement gearbox fits etrailer and Ram 2-speed square jacks with a 10,000-lb capacity.Features: Replaces the gearbox on your 2-speedjack Designed for use with etrailer and Ram 2-speedjacks with a 10,000-lb capacity Small gearbox is compact to reduce interference and provides a sleek look Hardware is included
Replaces the connecting rod and allows you to operate the lead leg and follow leg of your etrailer or Ram 50,000-lb landing gear set (STLG-5003321, STLG-5003312, TJD2SPDSET-50100) at the same time.Features: Replaces the connecting rod on your etrailer or Ram 50,000-lb, 2-speed landing gear jacks (STLG-5003321, STLG-5003312, TJD2SPDSET-50100)
Designed for use with your Bulldog 2-speed planetary jack, this powered drive offers quieter operations and a more efficient use of electrical power than competitive units. ... Features: Makes lifting with your Bulldog jack faster and easier Fits Bulldog 2-speed, planetary-gear jacks with 12,000-lb static capacity Works great for horse, livestock and heavy-duty trailers Designed to be compact for tight applications Offers quiet operation and super-efficient use of electrical power Lifts 3" per minute (at typical working loads) Can be used for either single or tandem applications Includes hex coupling for tandem jack operations Allows years of maintenance-free operation thanks to a permanently lubricated system Has custom-designed wiring harness and rocker switch in weatherproof box Includes 25-amp circuit breaker with push-button reset Can be operated manually in the event of power loss Resists the elements Aluminum gearbox guards against corrosion Weatherproof cover protects entire kit Installs easily with all required parts included Powered-drive assembly Torque stop tube with energy absorber Terminal box Wiring harness and switch box Hex coupling Weatherproof cover Specs: Motor power: 12 volt DC Lift capacity: 7,500 lbs Application: Bulldog 12,000-lb capacity, 2-speed, planetary-gear jacks Limited 5-year warranty
Replaces the extend/retract waterproof switch and wiring harness for your Lippert electric stabilizer jack (LC298707).Features: Replaces the extend/retract waterproof switch and wiring harness for your Lippert electric stabilizer jack (LC298707) IP66 rated switch Black color Quantity: 1 switch
Designed to work with most scissor jacks, this unique socket is used with your power drill to extend and retract your jack up to 10 times faster than with a manual crank. ... Features: Socket lets you use a power drill (not included) to speed up extension and retraction of scissor jacks Eliminates manual cranking Works up to 10 times faster than hand cranking Easy operation with a powered drill that uses 3/8" drill bits Zinc-plated steel is durable and corrosion resistant Non-slip shank Hex socket measures 3/4" 2-Piece construction Lifetime warranty
Replaces the switch housing for your Lippert Components high-speed power stabilizer jack (LC369774). Black color.Features: Replaces the switch housing for your Lippert Components high-speed power stabilizer jack (LC369774) Quantity: 1 black housing
Replaces the switch housing for your Lippert Components high-speed power stabilizer jack (LC369774). White color.Features: Replaces the switch housing for your Lippert Components high-speed power stabilizer jack (LC369774) White color Quantity: 1 replacement housing
Replaces the power switch for your Lippert Components high-speed power stabilizer jack (LC369774). White color.Features: Replaces the power switch for your Lippert Components high-speed power stabilizer jack (LC369774) White color Quantity: 1 replacement power switch
Electric jack has a drop leg for 4-1/2" of lift on top of the 18" of screw travel. Large footplate minimizes sinking. Jack can be welded or bolted onto any A-frame trailer. ... Features: Tongue jack positions quickly and easily with integrated drop leg 12V Motor powers jack, eliminating need for hand cranking Built-in toggle switch for easy operation Integrated circuit breaker prevents motor damage All-steel gears are strong and durable Large front light makes it simple to set up your camper at night LEDs last longer and use less energy than incandescent bulbs Lamp is positioned so that it directs light downward to better focus on ground Emergency, ratchet-style crank socket 9/16" Deep well socket inserts into end of drive collar - ratchet clockwise to retract, counterclockwise to extend Zerk fitting on the lower stem assembly allows access to grease the threaded rod which leads to a longer jack life Easy bolt-on or weld-on installation for A-frame trailers Hardware not included Mounting holes fit 2-1/4" spacing Extra-large footplate provides excellent stability Die-cast aluminum cap resists corrosion Sturdy steel construction with black powder coat finish Specs: Bracket height: 9-1/2" Retracted with footplate retracted 27-1/2" Extended with footplate retracted 32" Extended with footplate extended Total lift: 22-1/2" Screw travel: 18" Drop leg travel: 4-1/2" Travel speed (w/ 1,000-lb tongue weight): Extends 6" in 29.8 seconds Retracts 6" in 27.6 seconds Lift capacity: 4,000 lbs Outer tube diameter: 2-1/4" Inner tube diameter: 2" Footplate diameter: 6" 5-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
... Best for severe-duty tractor trailers, agricultural, and construction uses. Measures 13" when retracted. Drop leg adds an extra 11-1/2".Features: Companion jack works with your etrailer or Ram 2-speedjack (TJD2SP-25100 - sold separately) to raise and lower your gooseneck trailer Ideal for heavy-duty agricultural, construction and industrial trailer uses Hands-free spring return lets you retract the leg using your foot Drop leg with spring-loaded plunger pin increases overall extension for maximum adjustability Faster and easier to align than a pin and clip Round footplate minimizes sinking in soft ground Strong, stable, and durable industrial-sized steel frame Black painted inner and outer tubes Easy maintenance Built-in grease zerks make routine maintenance easy Weld on installation Sidewind handle, cross shaft, and gearbox are sold separately Specs: Lift capacity: 25,000 lbs Total travel: 24-1/2" Screw travel : 13" Drop leg travel : 11-1/2" Overall height (from bottom of foot to top of jack): Retracted: 30" Extended: 43" Height (from bottom of footplate to bottom of outer tube): Retracted: 5" Extended: 18" Outer tube length: 25" Outer tube width: 4-3/8" Inner tube width: 4" 1-1/2" Plunger pin hole diameter Adjustment hole spacing: 4" on center Rod shaft diameter: 1" Footplate diameter: 9-7/8" 1-Year warranty
This super-fast electric A-frame jack has a durable, efficient ball screw and a memory function for easy setup. Offers 18" of travel and 4-1/2" of extension with the drop leg. ... Features: Electric jack lets you lift and lower your A-frame trailer quickly and easily Efficient ball screw makes it fast and easy to position your trailer Ball bearings roll along sturdy, threaded steel rod Powered drive provides quiet operation and eliminates the need for hand cranking Easy-to-access on/off and retract/extend buttons make for simple operation Buttons on front panel will not break off like standard toggle switches LED courtesy light on front of jack allows for simple nighttime setup Durable powder coat finish resists corrosion Emergency override allows manual operation in case of power failure Included adapter allows you to easily use your drill to raise and lower the jack Manual crank handle not included Bolt-on installation Specs: Bracket height: 10-1/2" Retracted - from mounting bracket to bottom of footpad 28-1/2" Extended - from the bottom of the extended jack and extended footpad Total travel: 22-1/2" Travel: 18" Drop leg: 4-1/2" Drop leg: 4 adjustment holes 1-1/2" apart center to center Travel speed (w/ 1,000-lb tongue weight): Extends 6" in 9.5 seconds Retracts 6" in 8.6 seconds Lift capacity: 4,000 lbs Outer tube diameter: 2-1/4" Footplate diameter: 6" Motor attributes: 12 Volt 10" Travel in 18 seconds 2-Year warranty 10-Year warranty if registered within 90 days How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Switch-operated jack has 18" of screw travel and a 4-1/2" drop leg. Retracted height is 9" and extended height is 27". 7-Way plug makes setup easy. ... Features: Electric jack lets you raise and lower your A-frame trailer quickly and easily 7-Way RV-style plug pulls power from your vehicle's trailer connector No need to manually wire for power Weather-sealed toggle switch on underside of housing extends and retracts jack for easy operation 2 LED lights on either side make it simple to set up your camper at night Red button on back of jack turns lights on Convenient built-in leveling gauge lets you see if your setup is level Integrated circuit breaker prevents motor damage Emergency crank (included) allows you to manually operate jack if needed Crank inserts into socket beneath level Drop leg allows for increased lift and saves time when raising or lowering Sturdy carbon steel construction Black powder coated outer tube Zinc-finished inner tube and footplate resist corrosion Easy bolt-on installation Specs: Bracket height: Retracted: 9" Extended: 27" Total lift: 22-1/2" Screw travel: 18" Drop leg travel: 4-1/2" Overall height when full extended: 31-1/2" Travel speed (w/ 1,000-lb tongue weight): Extends 6" in 29 seconds Retracts 6" in 26.4 seconds Footplate diameter: 5-1/2" Outer tube diameter: 2-1/2" Clearance (bracket to top of level gauge): 19-1/2" Lift capacity: 3,500 lbs Motor: 12V Power cord length: 4' 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball.
Whether you're replacing your trailer brakes or installing some on a new brake axle, these are easy to work with from start to stop. 12" x 2" Assemblies fit 14.5" to 16" wheels. 5 bolt pattern backing plate. Made in the USA.To keep your brakes working great, it's important to adjust them pretty routinely. For this job, grab a floor jack and either a brake adjustment tool (sold separately) or just a standard flathead screwdriver. Jack up your trailer enough to get the wheel(s) off the ground.
Replacement heavy-duty jack leg is ready to get back on the job site! Front-facing plunger pin is easy to reach when using the adjustable drop leg. Jack lifts 5 tons supported by a strong carbon steel frame. ... Features: Spring return retracts the jack hands-free Drop leg extension makes up about half of the total travel Cuts time spent cranking, adjusting, and leveling in half Easily-accessible front-facing plunger pin Helps to avoid reaching under the nose of your trailer frame to use the drop legs Works best if you have open space between your trailer and your truck Weather-resistant black paint coat finish Carbon steel construction Single speed gearbox is easy to maintain even in a long life of hard work Use the grease zerk fittings to help keep gears working smoothly Weld-on installation Includes standard footplate and sidewind crank Cross shaft sold separately Specs: Lift capacity: 10,000 lbs Support capacity : 12,000 lbs Total travel: 27" Screw travel : 12-3/8" Drop leg travel : 15" Overall height: Retracted: 27-1/2" Extended: 54-1/2" Outer tube width: 4" Inner tube width: 3-3/4" Distance between drop leg adjustment holes: 3-3/8" on center Number of adjustment holes: 5 Foot plate dimensions: 8-1/2" x 8-1/2" How to Determine the Support Capacity You Need in Your Landing Gear If you will be using this landing gear to lift and lower your trailer onto a hitch ball or kingpin, then you should choose the jack you need based on its lift capacity.
Filters
