Trailer Wiring Has 5-Wires White, Yellow, Green, and 2 Browns
Updated 03/11/2025 | Published 05/20/2015 >
Question:
I have attempted to repair a 4 wire connector on my trailer. When repairing I have a white wire/ 2 BROWN wires, yellow wire and Green. I can only get the tail lights to come on. NO turns, brakes, etc. What should I do with the 2 brown wires. On the old connector it looks like the 2 BROWNS went into the connector together. Any advice would be appreciated
asked by: Dexter K
Helpful Expert Reply:
If it was a 4-pin connector with 5 wires then it is called a wishbone harness and would have 2 wires attached to the running light pin so you have one wire for each side of the trailer.
Typically, on a 4-Way, the white wire is ground, brown is running lights, yellow is left turn/brake lights, and green is right turn and brake lights. On a wishbone 4-Way you would have a ground wire and then you usually see a brown wire with yellow stripe for the left side running lights and a brown wire with green stripe for the right side running lights. They are attached to the same pin. All of the other functions are the same.

My G.
2/28/2025
My trailer 4 prong wiring is old. It has a a green wire and a green wire w brown, a lone white, and white and white brown


Tom
3/9/2025
I have a wishbone harness on my 2002 carry-on trailer. The squirrels ate my wires on the plug side. Replacing it with a four wire plug. I wired everything up, White to white, green to green, Brown wire to brown and yellow and brown wire to brown and green wire. . I have brake lights I have directionals, but no tail lights. Is that normal? Could it be the bulb? And I’m not sure what bulbs are in there. Please advise. Thank you.



Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Replacement Inner Tube with Drop Leg, Foot, and Pull Pin for Curt Heavy Duty Direct Weld Square Jack
- Shop: Replacement Square, Direct Weld Jack Inner Tube with Spring-Return Drop Leg
- Video: Review of CURT Camper Jacks - Trailer Jack - C28957
- Video: Review of etrailer Camper Jacks - Trailer Jack - TJD-12000SP-FIP
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Shop: TecNiq Stop Tail Turn Reverse Light - 6" - Oval - Amp Plug - Grommet Mount
- Shop: TecNiq Stop Tail Turn Light - 6" - Oval - Tripole - Surface Mount
- Q&A: How to Figure Out Wiring for Trailer Tail Lights with 5 Wires
- Q&A: Wiring New 4-Way Connector on Trailer with 5 Wires
- Shop: Optronics Mini LED Trailer License Plate Light w/ Chrome Housing - 2 Diodes - Rectangle - Clear Lens
- Shop: Uni-Lite LED Clearance and Side Marker Light w Grommet - Submersible - 2 Diodes - Clear Lens - Amber
- Shop: PVC Grommet for 6-1/2" Oval Trailer Tail Lights
- Article: Trailer Wiring Diagrams
- Q&A: Why Does Trailer's Wiring have Two Brown Wires
- Q&A: Why Does 4-Pin Trailer Wiring Have 5 Wires
- Video: Review of DeeMaxx Brake Actuator - Rubber Hydraulic Brake Line - Trailer Brakes - DE64JR
- Search Results: trailer hub
- Search Results: idler hubs trailer axles
- Search Results: hub
- Search Results: idler hub trailer hubs and drums
- Q&A: Standard Color Code for Wiring Simple 4 Wire Trailer Lighting
- Search Results: brake line fittings
- Search Results: 3/16 brake line
- Video: Ultimate Overview of the Trailer Idler Hub Assembly for 2K Axles
- Video: Feature Breakdown: Easy Grease Trailer Idler Hub Assembly for 2K Axles
- Q&A: Where Does Trailer Wiring that is Brown/Yellow and Brown/Green Attach on Trailer with Solid Brown
- Q&A: Does Nut Retainer go on Before or After Nut For Easy Grease Trailer Idler Hub Assembly
- Shop: Suspension Enhancement
- Shop: Trailer Wiring
- Video: Review of the Trailer Hitch Extender for 2" Hitch Receivers
Joe
1/27/2025
Trailer wiring….white, yellow/brown wire, green/brown wire. Vehicle wiring… white wire, yellow wire, green wire, black wire