Just pull the easy-to-access pin on this jack to drop the entire jack tube down for quick, easy adjustment. No drop leg needed. Seven height settings offer up to 12" of drop. Sidewind handle allows for an additional 15-1/2" of screw travel.Features: Utility jack lets you raise and lower your trailer 7 Height settings allow for fast, easy positioning - no blocks or drop leg needed Lower the jack from the mounting bracket to get up to 12" of lift Manually crank the jack to achieve up to an additional 15-1/2" of travel Jack retracts to be flush with bottom of trailer frame Eliminates risk of damaging hang-ups or snags while traveling Can also be entirely removed from mount to provide clearance above frame for easy access to vehicle's rear hatch Low-friction ball screw minimizes resistance to reduce wear, noise, and heat Ball bearings roll smoothly through threads of jack screw - no direct, friction-inducing contact Steel construction is durable Zinc finish resists corrosion Sidewind handle allows for simple cranking Mounting bracket can be welded or bolted on Wheel included Specs: Application: 3" x 3" or 3" x 4" trailer framers Height: Extended: 43-1/2" Retracted: 28" Total lift: 27-1/2" Travel by cranking the handle: 15-1/2" Drop tube: 12" - adjusts in increments of 2" Inner tubing diameter: 2" Outer tubing diameter: 2-1/4" Wheel diameter: 5-3/4" Lift capacity: 1,500lbs Static capacity: 2,500 lbs 1-Year limited warranty
Bolt-on mounting kit allows you to attach your etrailer or Ram 1,200-lb or 1,500-lb marine swivel jack (MJ-1200B or MJ-1500B) to your trailer's frame.Features: Bolt-on kit allows you to mount your etrailer or Ram 1,200-lb or 1,500-lb marine swivel jack Designed for use with MJ-1200B and MJ-1500B Series jacks 1-Year warranty
Replaces the sidewind handle from your etrailer or Ram swivel marine jack with a 1,500-lb capacity. Handle allows you to manually crank the jack. Handle arm has a corrosion-resistant, zinc finish. Designed for MJ-1500 Series jacks.Features: Replaces the sidewind handle from your etrailer or Ram swivel marine jack with a 1,500-lb capacity Designed for use with MJ-1500 Series jacks Durable, zinc-finished handle arm resists corrosion
Get more traction and stability on uneven ground than with 1-wheeled jacks. Dual wheelbase swivels 360 degrees for maximum maneuverability. Marine-grade zinc resists rust and corrosion.Usually, your tongue weight is about 10-15% of your gross trailer weight (GTW). For example, a 10,000-lb trailer has a tongue weight of 1,000 lbs to 1,500lbs. To raise the tongue of a trailer this size, you'd need a jack that can handle a static load of no less than 1,500lbs.
Manual jacks get old fast when you're trying to hitch up or level. This 5,000 lb electric A-frame jack runs off your 7-way, lifting your trailer with a switch, while the drop leg adds the extra reach you need to dial in height before leveling.Bolt it on with the included hardware, plug into your 7-way, and you're set for the next campsite. How to Pick the Right Trailer Jack Capacity Your jack just needs to lift the tongue weight, usually 10 to 15% of your trailer's total weight. For example, if your trailer plus gear weighs 10,000 lbs, your tongue weight will be 1,000 to 1,500lbs.
Replaces the gears and roll pins on your etrailer or Ram swivel marine jack with a round tube. Designed for MJ-1000 Series jacks.Features: Replacement gear kit works with etrailer and Ram marine swivel jacks that have a round tube Designed for 1,200-lb and 1,500-lb MJ-1000 Series jacks Kit includes 2 gears and 2 roll pins 12 Teeth per gear
Replacement mounting hardware fits your etrailer or Ram bolt-on, marine swivel jack. Designed for MJ-1200B, MJ-1206B, MJ-1500B, and MJ1500B-DWL Series jacks.
Removable poly wheel is designed for etrailer or Ram 1,500-lb marine jacks. Caster reduces your jack's overall capacity to 1,500lbs.Features: Caster assembly is designed for etrailer or Ram 1,500-lb marine jacks Polyolefin construction is durable and long-lasting Specs: Application: marine jacks with a 1,500-lb capacity Wheel diameter: 8" Wheel thickness: 2" 1-Year warranty
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.Usually, your tongue weight is about 10-15% of your gross trailer weight (GTW). For example, a 10,000-lb trailer has a tongue weight of 1,000 lbs to 1,500lbs. To raise the tongue of a trailer this size, you'd need a jack that can handle a static load of no less than 1,500lbs.
Powered A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 10-3/4", an extended height of 28-3/4", and 18" of travel. Extends 6" in 41 seconds with 1,000 lbs of tongue weight.Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500lbs.
Removable dual poly wheel is designed for etrailer or Ram 1,500-lb marine jacks. Caster reduces your jack's overall capacity to 1,500lbs.Features: Dual caster assembly is designed for etrailer or Ram 1,500-lb marine jacks Polyolefin construction is durable and long-lasting Specs: Application: marine jacks with a 1,500-lb capacity Wheel diameter: 6" Wheel thickness: 4" 1-Year warranty
Easily load or unload your truck camper with this sturdy cable jack. Portable design does not require permanent installation. Simply place the lift bracket under your camper and crank to raise. Breaks down into 3 pieces for storage.Features: Cable jack helps you load and unload your truck bed camper Portable design - no need to permanently install unsightly electric jacks on your camper Disassembles into 3 pieces for easy storage Extra-tall pole lest you clear the bed rails on tall pickups Hand winch lets you easily raise and lower the jacks Safety latch keeps the cables from free-spooling Plastic handle grip offers comfortable cranking Aircraft-grade cable is strong and reliable Sturdy tripod base evenly distributes your camper's weight Help to eliminate front-to-back and side-to-side motion Large footplate helps to prevent sinking and tilting L-shaped lift bracket supports the bottom and the sides of your camper Simply place lift bracket under your camper and crank the winch to raise Durable, corrosion-resistant construction Tripod base and lift bracket are both black powder coated Upright pole is galvanized Made in the USA Specs: Quantity: 1 cable jack Lifting range: 17" - 67" Overall height when assembled: 76" Weight capacity: 1,500lbs Lift bracket dimensions (each): 26-1/2" long x 2" wide x 2" tall Leg length: Fixed: 17-1/2" from end to edge of pole opening Collapsable: 15" Footpad diameter: 4-3/4" Winch gear ratio: 4:1 1-Year limited warranty Note: Always use these jacks in pairs on level ground.
Just pull the easy-to-access pin on this jack to drop the entire jack tube down for quick, easy adjustment. No drop leg needed. Seven height settings offer up to 12" of drop. Topwind handle allows for an additional 15-1/2" of screw travel.Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500lbs.
Swing-up boat trailer jack is perfect for your small boat or jet ski trailer. 6" Caster swivels 360 degrees to make it easy to maneuver your trailer. Clear zinc finish fights rust and corrosion.Usually, your tongue weight is about 10-15% of your gross trailer weight (GTW). For example, a 10,000-lb trailer has a tongue weight of 1,000 lbs to 1,500lbs. To raise the tongue of a trailer this size, you'd need a jack that can handle a static load of no less than 1,500lbs.
Use this electric tongue jack to lift your trailer with the flip of a switch. The sturdy steel jack can handle up to 5,000 lbs. It has 18" of travel and a 5" drop leg for extra lift. LED lights on both sides boost visibility at night.Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500lbs.
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.For example, a 10,000-lb trailer has a tongue weight of 1,000 lbs to 1,500lbs. To raise the tongue of a trailer this size, you'd need a jack that can handle a static load of no less than 1,500lbs.
Smooth and powerful hydraulic jack lifts your heavy load without your help. Just press the button on the corded remote control to lift and lower your trailer. The large, pivoting foot pad stabilizes the jack even on rough terrain.Features: Hydraulic jack Ideal for use with horse and livestock trailers, as well as commercial and construction trailers Smooth and effortless operation, even for heavy loads Self-contained pump and power unit comes attached to the jack Convenient corded remote control switch Large, pivoting foot pad stabilizes on uneven surfaces Square tube Durable exterior-grade black finish Easy bolt-on installation Specs: Screw travel: 24-1/4" Bracket height: 34-7/8" Retracted 59" Extended Lift capacity: 12,000 lbs Support capacity: 15,000 lbs 500W 12V DC dual motor Reservoir capacity: 2.5 quarts Maximum pump load: 3,000 psi Working pressure: 1,500 psi Mounting tabs: 7-1/2" x 4" Foot pad: 10" long x 10" wide 1-Year warranty
Swing-up boat trailer jack is perfect for your small boat or jet ski trailer. 6" Caster swivels 360 degrees to make it easy to maneuver your trailer. Clear zinc finish fights rust and corrosion.Usually, your tongue weight is about 10-15% of your gross trailer weight (GTW). For example, a 10,000-lb trailer has a tongue weight of 1,000 lbs to 1,500lbs. To raise the tongue of a trailer this size, you'd need a jack that can handle a static load of no less than 1,500lbs.
Square-tube jack is ideal for supporting heavy pontoon or bowrider trailers. Footplate is more stable than caster wheels. Total lift is 15-3/8" of screw travel plus 13-3/4" of drop leg travel. Clear zinc finish resists rust.Usually, your tongue weight is about 10-15% of your gross trailer weight (GTW). For example, a 10,000-lb trailer has a tongue weight of 1,000 lbs to 1,500lbs. To raise the tongue of a trailer this size, you'd need a jack that can handle a static load of no less than 1,500lbs.
This A-frame jack has a retracted height of 7-1/8" and an extended height of 22-3/8". The drop leg offers 13-1/2" of lift on top of 15-1/4" of screw travel. Includes a sidewind handle and footplate.Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500lbs.
This A-frame jack has a retracted height of 7-1/8" and an extended height of 22-3/8". The drop leg offers 13-1/2" of lift on top of 15-1/4" of screw travel. Includes a sidewind handle and footplate.Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500lbs.
Powerful hydraulic jack with self-contained pump and power unit lets you lift heavy loads with a press of a button. Pivoting foot pad stabilizes the jack on rough terrain.Features: Hydraulic jack contains everything you need to lift your trailer quickly and safely Ideal for use with horse and livestock trailers, as well as commercial and construction trailers Self-contained pump and power unit comes attached to the jack Pump offers up to 3,200 psi extension and 1,500 psi retraction pressures Pivoting foot pad stabilizes on uneven surfaces Square tube with durable exterior-grade black finish bolts onto your trailer's frame Specs: Bracket height: 30-3/4" Retracted 50-3/4" Extended Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Maximum hydraulic flow rate: 2 GPM Maximum pressure: Raising: 3,200 psi Lowering: 1,500 psi 3-Year warranty
This fast electric A-frame jack has a durable, super-efficient ball screw and a memory function for fast, easy setup. Offers 26" of total lift. Extends 6" in 18.4 seconds with 1,000 lbs of tongue weight.Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500lbs.
Use this electric tongue jack to lift your trailer with the flip of a switch. The steel jack has 19" of travel and a 5" drop leg for extra lift. Extends 6" in 32.2 seconds with 1,000 lbs of tongue weight.Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500lbs.
Filters
