Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
I checked with Bulldog and here is why they include the extra gears with the #BD1824200100: If your date code is before E06 (May 2006), then you will also need to change out the bevel gear (included) to accommodate the larger dowel pin (included).…
view full answer...Hey Ron, good to hear from you! How long are your current U-Bolts? The U-Bolt Kit #APUBR-8 could potentially work as it has 7" long U-Bolts, but it really boils down to what you currently have. For something longer we have the MORryde U-Bolt Kit…
view full answer...Since trailer makers don't maintain spec on the jacks they install (especially for a 5th wheel that is close to 17 years old) you'll want to check the jack for any part numbers to help you choose the correct repair kit. We do have bevel gear…
view full answer...There is an initial pin that holds the shaft at the top of the jack into place. You will simply need to use a flat head screwdriver to compress the spring that is covering up that pin and the pin should fall right out. From there it is just a matter…
view full answer...Bulldog Powered-Drive Kit #BD1824200100 comes with the parts needed to install and use the kit with your Fulton Magnum 12K jack as long as it was made after 2003. If it was made in 2003 or earlier then there isn't a kit for it.
view full answer...I spoke to my contact at Bulldog who said that the Model 12, 180 Series Bulldog jack that you have is the older version of the the current 10K jacks like part #BD182500. Since you have the older version without the spring that you mentioned seeing in…
view full answer...Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…
view full answer...The correct replacement for the Dexter Trailer Brake Assemblies 023-464-00 is the Dexter Nev-R-Adjust Electric Trailer Brake Kit part #23-464-465.
view full answer...I would be happy to help! Since your Dexter axle has a 7000lb rating you will need the Electric Brake Assemblies #23-464-465 for self adjusting brakes, or #23-180-181 for standard brakes that you will need to adjust on occasion. I recommended the…
view full answer...Hey Timothy, yes the Timken Bearing Kit part #TMK92VR is correct USA made bearing kit for a trailer with 7k axles like your 2019 Grand Design 351M.
view full answer...The best and safest way to have the axles orientated to the leaf spring is the way the trailer was originally manufactured. The trailer manufacturer will have tested the trailer with the original suspension setup for adequate braking and handling…
view full answer...You can get the longer U-bolts here; I checked with Roadmaster, and the 2630 are simply 7 inch long U-bolts, so you can use the following: - 3" Round Trailer U-Bolts (Qty 2) #SP01-060 These are 7 inches long so they are the same, and for a…
view full answer...