Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for 13-3/4" of lift in addition to the 15" of screw travel. Durable screw offers increased strength ... top of jack): 27-1/8" Retracted 41-7/8" Extended Total lift: 28-3/4" Screw travel: 15" Drop leg travel: 13-3/4" Lift capacity: 12,000 lbs Support capacity: 15,000 lbs Outer tube
Step on the dual-pin foot lever on this heavy-duty jack to use the drop leg hands-free - makes up half the total travel. Best for gooseneck setups where you can step between the truck and trailer ... best if you have open space between your trailer and your truck Heavy-duty internal components Durable jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy
Step on the dual-pin foot lever on this heavy-duty jack to use the drop leg hands-free - makes up half the total travel. Best for gooseneck setups where you can step between the truck and trailer ... 12,500 lbs. If you only have one jack that can get the job done, that's great! In fact, this should work more efficiently, allowing you to spend less time cranking. Note: Do not use landing gear to
Swing-up boat trailer jack is perfect for your small boat or jet ski trailer. 6" Caster swivels 360 degrees to make it easy to maneuver your trailer. Clear zinc finish fights rust and corrosion.Features: Supports, lifts, and lowers your boat or recreational trailer Swings up and down smoothly J-bolt handle lets you position jack quickly Makes it easy to move your trailer in tight spaces
Replaces the old Fulton bolt-thru swivel jack on your Jon boat or skiff trailer. Installs on your existing mounting bracket. Premium zinc finish has a 600-hour salt spray rating is ideal for trailers ... Features: Supports, lifts, and lowers your boat or recreational trailer Swings up and down smoothly J-bolt handle lets you position jack quickly Makes it easy to move your trailer in tight spaces
Pull the front-facing plunger pin on this jack to release the drop leg for 13-3/4" of lift on top of the 15" of screw travel. Durable screw offers increased strength. Sidewind crank ... Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum
Your Tie Down Model 66 can easily be replaced by one of our actuators. The Titan part #T43397007K would be a great drum brake option that has a 7,000 lb capacity and can fit 2 inch or 1-7/8 inch hitch balls.
If your 2020 Explorer is equipped with the factory 7-way trailer connector, it will have the brake controller connector under the dash. The connector is located under the dash, above and to the right of where the driver's right knee would be. The…
The D in 205/75D15 represents that the tire has a bias ply construction whereas the R in 205/75R15 represents that the tire has a radial ply construction. The difference between a bias and radial ply is in regard to the directions of the cords. In…
I do have steps for you to find the correct axle for your trailer but we aren't able to cross-reference these number. In order to choose the correct replacement axle for a trailer you'll first want to start with the weight capacity. The…
We recommend that all trailer tires be inflated to the max psi stated on the sidewall of the tire. If the tire is under inflated, the weight capacity is lowered to an unknown amount for that tire. Although running lower air pressures can improve the…
The closest grease seal we have available to the measurements you provided is the TruRyde Double Lip Grease Seal #RG06-010. This seal has an inner diameter of 1.249 inches and an outer diameter of 1.983 inches. You can use a digital caliper like…
The Reese Replacement Rubber Bumpers #30536 are intended for the side of the hitch closest to the cab. The pin head screw goes through the center of the rubber bumper and a speed nut goes through the bottom. I have provided links to the installation…
Overall length is just under 1 inch, it is .983 inches. Diameter of the base is all just under an inch at .987 inches. It is designed to fit a Reese 16K hitch, part #RP30047.
For standard 3,500 lb axles the correct bearing kit is the part #BK2-100 which comes with L44649 and L68149 bearings. Bearing Buddy Protectors #BB1980A-SS are the ones most commonly seen on 3,500 lb hubs. This is designed to fit a hub bore of 1.980…
We have a few options for door latches that might be good replacements for yours. There is the Bauer Products Manger Door Lock for Horse Trailers #BA95FR. This is designed for a vertical oriented door latch. We also have a horizontal opening style.…
For your 2019 Ram 3500 the factory brake controller plug is located under the dash on the driver's side. If you look directly above the accelerator pedal towards the center console there will be 2 plugs taped together. The 4 pin plug is the brake…
You would have to make an adapter since a 7-way female to 7-way female adapter isn't made. For wire you would need the part #DW04914-1 (sold by the foot). Then for 7-way connectors you would want the part #PK12703.
Replaces your old Fulton bolt-thru jack on your Jon boat or skiff trailer. Installs on your existing mounting bracket. Premium zinc finish has a 600-hour salt spray rating, which is ideal for ... : 14-3/4" Extended: 24-3/4" Screw travel : 10" Clearance: 10-1/2" from mounting bracket to top of jack Tubing diameter: 2" Pull pin diameter: 1/2" Wheel diameter: 8" 5-Year
Replaces the old Fulton bolt-thru swivel jack on your Jon boat or skiff trailer. Installs on your existing mounting bracket. Premium zinc finish has a 600-hour salt spray rating is ideal for trailers ... jacks Pin hole spacing: 3" on center Overall bracket dimensions: 4-1/2" wide x 4-1/2" tall Lift capacity: 1,200 lbs Bracket height: 12-3/4" Retracted 22-3/4" Extended Screw travel
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat ... down on you. Trailer Valet was thinking of you when they made this jack. Just slot the included drill attachment into your power drill's 1/2" chuck, remove the handle from the jack
A-frame trailer jack has a manual hand crank, but can also be powered by any 18-volt to 24-volt compact drill when using the included attachment. 700-Hour salt spray rating on the powder coat finish ... Features: Supports, lifts, and lowers your A-frame boat or recreational trailer Works as a powered jack when used with an 18V or 24V, cordless, non-impact drill (not included) Included drill adapter
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat ... drill attachment into your power drill's 1/2" chuck, remove the handle from the jack's driveshaft, and attach the drill in its place. Squeeze the trigger slowly to avoid too much torque off
Marine-grade swing-up boat trailer jack has a 600-hour salt spray rated zinc finish on the inner tubing. A glossy black paint finish provides a sleek look that other zinc-plated jacks don't have ... mounting bracket to top of jack Inner tube diameter: 2" Outer tube diameter: 2-1/4" Pull pin diameter: 1/2" Wheel diameter: 6" Limited 5-year warranty Excellent Corrosion Resistance The
Swap out your rusty Shelby trailer jack with this one. Swing-up jack has a rust-resistant premium finish that's 6 times stronger than traditional zinc. 6" Caster swivels 360 degrees ... Features: Supports, lifts, and lowers your boat or recreational trailer Swings up and down smoothly J-bolt handle lets you position jack quickly Makes it easy to move your trailer in tight spaces
Swing-up boat trailer jack is perfect for your small boat or jet ski trailer. 6" Caster swivels 360 degrees to make it easy to maneuver your trailer. Clear zinc finish fights rust and corrosion.: Retracted: 14-1/2" Extended: 24-1/2" Screw travel : 10" Clearance: 10-1/2" from mounting bracket to top of jack Outer tube diameter: 2" Pull pin diameter: 1/2" Wheel diameter
This jack offers premium rust protection, plus it's a great alternative to swing-up jacks if you have clearance issues along your trailer frame. Wheel swivels 360 degrees. Zinc finish has a ... Features: Supports, lifts, and lowers your boat or recreational trailer Fits great on trailers with short or cluttered tongues where a swing-up jack is a no-go Makes it easy to move your trailer in
Replaces the oil cap, O-ring, and plug for your Dexter axle. Fits 9,000-lb axles manufactured from 10/89 to 7/09, 10,000-lb axles manufactured prior to 7/09, and 12,000-lb and 15,000-lb heavy-duty ... Features: Replaces Dexter 21-36 oil cap Fits: 9,000-lb Axles manufactured from October 1989 to July 2009 10,000-lb Axles manufactured prior to July 2009 12,000-lb and 15,000-lb Heavy-duty axles
Replaces the protective top cap on Dexter 12,000-lb hydraulic jack add-on with selector valve; keeps internal components shielded from debris and moisture.Features: Direct replacement for cap on Dexter 12K hydraulic jack add-on with selector valve (PJS-12-20-ADS-K) Shields hydraulic components from dust, water, and road grime Durable construction
Replaces the ACME threaded rod and threaded nut on your etrailer or Ram square, direct-weld jack with a 10,000-lb lift capacity and a 12,000-lb static capacity. Designed for TJD-12000 Series jacks.Features: Replaces the threaded ACME rod and lift nut from your etrailer and Ram square, direct-weld jacks with a 10,000-lb lift capacity and a 12,000-lb static capacity Designed for TJD-12000 Series
Replacement right/street side jack works with your existing etrailer or Ram hydraulic setup. Offers 24-1/4" of travel and a 59" extension. Bolts on.Features: Replaces the right-side RAM square-tube leg from your etrailer or Ram hydraulic jack setup Hydraulic pump and power unit (e43VV) and left leg (e63VV) sold separately Works with units
Replacement jack works with your existing etrailer or Ram hydraulic setup. Offers 24-1/4" of travel and a 59" extension. Welds on.Features: Replaces 1 Ram square-tube leg from your etrailer or Ram hydraulic jack setup Hydraulic pump and power unit (e43VV) sold separately Works with units offering up to 3,200 psi extension and
Replacement left/curb side jack works with your existing etrailer or Ram hydraulic setup. Offers 24-1/4" of travel and a 59" extension. Bolts on.Features: Replaces the left-side Ram square-tube leg from your etrailer or Ram hydraulic jack setup Hydraulic pump and power unit (e43VV) and right leg (e73VV) sold separately Works with units
Need new hydraulic drum brakes that fit on your Dexter, Lippert, and AL-KO/Hayes axles? Look no further. 7" x 1-3/4" Assemblies fit wheels 16" or larger. 4-Bolt pattern backing plates. Made in the USA. hub-and-drum assemblies including Dexter, Lippert (LCI), and AL-KO/Hayes Configuration: left hand (driver's side) and right hand (passenger's side) Dimensions: 12-1/4" diameter x 3-1/2" wide
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12-1/4" x 5" Assemblies have rust-resistant, e-coated backing plates and dust shields to ... ensure quality Specs: Application: most standard hub-and-drum assemblies, including etrailer, Dexter, and Lippert (LCI) Dimensions: 12-1/4" diameter x 5" wide Mounting flange bolt pattern: 7 bolt
These brakes automatically adjust as you tow so you don't have to crawl around on the ground to do it manually. Dual-plunger cylinder offers great braking power. 12-1/4" x 5" Assemblies ... pad wear Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included Mounting bolts and hardware (BRKH12) sold separately Made in the USA Specs: Dimensions: 12
Filters
