This 2-bike rack has large wheel trays that are perfect for carrying fat bikes. It's also great for carrying e-bikes and bikes with fenders. Sliding wheel trays help prevent your bike's handlebars from bumping the saddles. in the USA Specs: Application: 1-1/4"x1-1/4" (Class I and Class II) and 2" x 2" trailer hitch receivers Carrying capacity: 2 bicycles Weight capacity: 60 lbs per bike 35 lbs per bike when
8-1/16"x2-7/8" Rectangle. Waterproof incandescent light acts as brake, tail, turn, side marker, side reflector, rear clearance, rear reflector, and license plate light for trailers over ... Specs: Configuration: driver side Passenger side: ST16RB (sold separately) Dimensions: 8-1/16" long x2-7/8" tall x 2-13/16" deep Distance between mounting studs (center on center): 2"
Contains everything needed to repack one hub on your Lippert, Dexter, or AL-KO 3,500-lb axle.Features: Contains everything needed to repack one hub on your Lippert, Dexter, or AL-KO 3,500-lb axle Includes: 1 Outer bearing (L44649) 1 Inner bearing (L68149) 1 Inner cup (L68111) 1 Outer cup
Marine-grade hub is designed for trailer idler axles. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race ... of a bolt hole right next to it can also help to determine the bolt pattern. If D = 2-5/8", then the bolt pattern is 5 on 4-1/2" If D = 2-3/4", then the bolt pattern is 5 on 4-3/4" If D =
This swivel jack pivots up for travel and down for use. Built-in grease zerk allows for simple greasing. Retracted height is 11". Extended height is 21-3/4". Weld-on pipe mount included. diameter: 2" Footplate dimensions: 7" long x4" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius: 7" Lift capacity: 2,000 lbs Support capacity: 3,000 lbs 1
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race ... of a bolt hole right next to it can also help to determine the bolt pattern. If D = 2-5/8", then the bolt pattern is 5 on 4-1/2" If D = 2-3/4", then the bolt pattern is 5 on 4-3/4" If D =
This swivel jack pivots up for travel and down for use. Built-in grease zerk allows for simple greasing. Retracted height is 15-1/4". Extended height is 30-1/8". Weld-on pipe mount included. with included male pipe mount Specs: Bracket height (from bottom of foot to center of pipe mount): 15-1/4" Retracted 30-1/8" Extended Travel: 14-7/8" Outer tube diameter: 2-1/4" Inner tube
Install this hub-and-drum assembly on your trailer. Fits 5,200-lb to 7,000-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts ... of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern. If D = 2-5/8", then the bolt pattern is 5 on 4-1/2" If D = 2-3/4",
Replace the worn or damaged magnet on your electric trailer brake assembly. Fits 12" x 2" Dexter assemblies with a 6,000-lb axle rating. Includes magnet, clip, and spring. 2-1/4" wide x7/8" thick
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race ... to it can also help to determine the bolt pattern. If D = 2-5/8", then the bolt pattern is 5 on 4-1/2" If D = 2-3/4", then the bolt pattern is 5 on 4-3/4" If D = 3", then the bolt
The Maxx coating on this hub-and-rotor assembly is even better than Dacromet for superior corrosion protection. Includes inner (L68111) and outer (L44610) races. and larger Bolt pattern: 5 on 4-1/2" Wheel bolt diameter: 1/2" Outer diameter: 10-3/16" 7-Year warranty Bearing, Race, and Seal Information: Bearings (sold separately) Inner bearing: L68149
Hub is made for use on trailer idler axles. Fits 2K E-Z Lube and Easy Grease axles with BT8 spindles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap ... on 4-1/2" Wheel stud dimensions: 1/2" diameter x1-5/16" long Hub diameter: 6.25" Grease cap flange diameter: 1.99" Weight capacity: 1,000 lbs Limited 1-year warranty Bearing, Race
8-1/16"x2-7/8". Waterproof light acts as brake, tail, turn, side marker, side reflex reflector, rear clearance, and rear reflex reflector for trailers wider than 80". Surface mount - ... lighting P2 rated Specs: Configuration: passenger's side (right-hand side) Dimensions: 8-1/16" long x2-7/8" wide x 2-13/16" deep Diodes: 18 diodes Power draw at 12.8 volts: Stop/turn
Marine-grade hub is designed for use on trailer idler axles. Fits 2,000-lb axles with BT8 spindles. Inner bearing (L44643) and race, outer bearing (L44643) and race, grease seal, grease cap, and lug ... Dexter, Lippert (LCI), and AL-KO Wheel size: 8" to 14" Bolt pattern: 4 on 4" Wheel stud dimensions: 1/2" diameter x1-5/16" long Grease cap flange diameter: 1.988" Weight
Kodiak's hub-and-rotor assembly makes it easy to change from drum brakes to disc brakes. Made of machined cast iron with dacromet plating, this 1-piece unit is balanced for a smooth ride ... : Fits: Axle capacity: 3,500 lbs Wheel size: 13" and larger Bolt pattern: 5 on 4-1/2" Wheel bolt diameter: 1/2" Outer diameter: 10" 3-Year warranty Bearing, Race and Seal Information
Hub-and-drum assembly fits 5,200-lb to 7,000-lb E-Z Lube axles with spindles that require a 2-1/8" grease seal. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal ... are included Hub and drum are made in the USA Specs: Application: 5,200-lb to 7,000-lb E-Z Lube trailer axles that require 2-1/8" inner diameter grease seal Also fits spindles that take a 2-1/4" inner
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 7,000-lb axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal ... , including Dexter, Lippert (LCI), and AL-KO Actual drum dimensions: 12" diameter x2-3/8" long Works with 12" brake assembly Bolt pattern: 8 on 6-1/2 Wheel studs: 9/16" diameter x1-5/8