Search: valve   >  

The Dexter Electric Trailer Brake Kit #23-105-106 are a replacement set for the 023-358-00. This kit includes a right and left brake assembly that is manually adjustable. I recommend the Dexter Nev-R-Adjust Electric Trailer Brake Kit #23-458-459 as…

In order to replace the Dexter 023-359-00 left hand and 023-360-00 right hand braking assemblies you will want to use the Dexter Nev-R-Adjust Electric Trailer Brake Kit part #23-464-465 which will replace both sides and it's a direct bolt-on…

Kenny, those bolts for the B&W Companion 5th Wheel Trailer Hitch #BWRVK3500-5W should be torqued to 40 ft. lbs. Also, the pivot arms would need to be torqued to 80 ft. lbs, the draw down bolt should be tighten to 60 ft.lbs and the arms should be…

90-120 ft lbs of torque is probably about right for your trailer rims. If you check out the lug nut torque chart that I attached you will see that nearly all of the torque specs are that and higher.

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

SnapPads like the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet - Qty 6 Item #SP54FR6 can be taken off and on as needed so you won't have to keep replacing them every time you need to take them off.

Than you for providing the photograph from under your trailer near the location you would like a propane quick disconnect hose installed. In the picture we see a iron pipe elbow attached to a fitting which is, male pipe thread on one side and male…

The Camco Quick-Connect Kit for Low Pressure Propane Systems #CAM59853 will replace a quick disconnect for a propane tank as long as it is a low pressure system like this kit is designed to work with. So no other parts would be needed. This system…

The Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs - Fixed Side, #LC84FR is the left side of the slide-out as looking at it, facing it, from the outside. The float side, #LC26VR, will of course be the right side as facing…

No, the hall effect motor does not have to be greased, but per the service manual if the jacks are down for an extended period, it is recommended to spray the exposed leveling jack tubes with lubricant every 3 months for protection. If you live in a…

While we don't have any custom fit trailer wiring harnesses that fit the 2011 Isuzu NPR we can still help with a universal fit option like the #C56175 which you'd have to wire to the taillight circuits of your NPR.

The Kwikee part number 903209000 comes up as a 32 Series step so the Kwikee Electric RV Step Complete Assembly - Double - 32 Series - 24" Wide #LC372261 would be the correct replacement and it comes with the whole setup to completely replace…