bing tracking image
  1. RV Waste Valves
  2. Valterra
  3. Double Waste Valve - Electric
  4. Sewer Elbow
  5. 3 Inch Hub
  6. Rotating Valve
Valterra EZ Valve Double Electric Waste Valves - Rotating - (2) 3" Hubs to 3" Lug Fitting

Valterra EZ Valve Double Electric Waste Valves - Rotating - (2) 3" Hubs to 3" Lug Fitting

Item # E84-8
Retail:$719.31
Our Price: $426.97
You Save: $292.34
RV Waste Valves
Shipping Weight: 9 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Replace the standard waste valves on your RV's black-water tanks with these electric ones so that you can open and close the valve with the flip of a switch. Light comes on when valve is open. Wiring harness and switch plate included. Great Prices for the best rv waste valves from Valterra. Valterra EZ Valve Double Electric Waste Valves - Rotating - (2) 3" Hubs to 3" Lug Fitting part number E84-8 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (91)
  • Q & A (0)
  • Photos

Valterra RV Waste Valves - E84-8

  • Double Waste Valve - Electric
  • Sewer Elbow
  • 3 Inch Hub
  • Valterra
  • Rotating Valve

Replace the standard waste valves on your RV's black-water tanks with these electric ones so that you can open and close the valve with the flip of a switch. Light comes on when valve is open. Wiring harness and switch plate included.


Features:

  • Electric waste valves replace or upgrade the waste valves on your RV's black-water and gray-water tanks
  • Easy operation with the flip of a switch
    • Valves open to allow flow from your black-water and gray-water tanks
  • Lights come on when valves are open
  • Tool-free manual override
    • Remove pin, turn handle, and pull handle to open valve
  • High-torque, water-resistant electric motors
  • Built-in 5-amp breaker provides circuit protection
    • Resets with a push of a button - no fuses to replace
  • 3" Hubs slide onto your sewer pipes
  • 3" Lug fitting allows you to connect to your sewer hose
  • Wiring harnesses, switch plate, seals, hardware, and installation instructions included
    • Switch plate installs in RV's control compartment
    • ABS solvent bond (A05-0303) sold separately for installation of valve
  • Compatible with 12V systems


Valterra electric valve pieces

The switch plate, wiring, seals, and hardware needed to install these electric waste valves on your RV's black water tank and gray water tank are included. The switch plate installs in the RV's control panel. The waste valves secure to existing pipes using ABS solvent cement (A05-0303 - sold separately). A booklet with step-by-step instructions and a template for drilling are also included.


Valterra electric valve manual use

If you're dry camping or in the case of a power failure, the manual override is easy to use. Simply remove the pin from the valve's lift arm and turn the handle 90 degrees clockwise. Then pull the handle to open the valve.



E84-8 Valterra Easy Valve Electric Waste Valve - 3" Hub x Hub x Bayonet





Customer Satisfaction Score:


Customer Reviews

Valterra EZ Valve Double Electric Waste Valves - Rotating - (2) 3" Hubs to 3" Lug Fitting - E84-8

Average Customer Rating:  4.7 out of 5 stars   (91 Customer Reviews)

Replace the standard waste valves on your RV's black-water tanks with these electric ones so that you can open and close the valve with the flip of a switch. Light comes on when valve is open. Wiring harness and switch plate included.

by:

Best investment my wife and i have made so far. Next is continuous hot water heater



by:

Good quality components. One of the valve actuators arrived damage. Contacted etrailer and they shipped out a replacement. All in all great addition to my sister-in-law's rig as she has trouble bending down



by:

Nice and look nice had lots of good wiring but it did not fit in where my other one was in my coach I would have to cut away half the pipe and Metal and still would not fit because of my water tank right next to it wish I could have used it was a good dealing with etrailer thank you



by:

Only reason it's not five stars is the shipping, they wouldn't let me ship it to a PO box because of the wait but UPS took it to the post office??, Otherwise love etrailer they are alot of help and these valves which I didn't need the Y but it was cheaper than buying 2 single valves.



by:

These valves are a huge improvement over the manual types. I wound up disassembling the unit sent and just replaced the valves, as the assembly was narrower than my existing set. 8 1/4" between the flanges, mine was 11"+, No instructions were included. Took most of the day to complete single handed. Extra hands would be very helpful...



by:



by:

Great service.



by:

Excellent service as usual



by:

Got it today thought I’ll probably put in Saturday and as I took it out of the box the manual lever lock was broke and filed down to make it look like it was meant to be. And it also said that it comes with the black and gray water switch, it only came with the black tank one. Direction should have been included, right nope.



by:

Installation was easy…. Getting to them was the hard part.
Taking down the underbelly was less than fun. Cutting holes in it was even a worse idea.
But, installation went well. Great product, super fast open and close, easy to wire and made my own console for the switches which wasn’t hard either.

Had to put them in different directions due to the main sewer drain being in the way but the auto gate valves do not care which way they go, they work fine either way. Just hope they last as I really don’t like working on my back….



by:

I installed 3 of these valves on my RV, i've had them for a year now with no problems with the valves themselves the only issue was one of the switch red lights that lets you know it's open went out but really don't need it, I am very pleased



by:

Nice valve for remote operation . The wiring is 4 ft from switch to motor/valve, and 3 ft of wire for power. I replaced power wire with a 10 ft piece which was only $9 bucks. Take pic of switch wiring cause you need to remove wires from switch to pass wires through any holes you drill in floor and cabinets, etc . Watch out for water , electric wires when drilling holes. Hole needs to be at least 1/2”for wire ends to pass through. If wood is thick I would do 5/8” hole . Pass big wire ends through first and smaller next. Or cut wire ends off and recrimip new ends after running wires.



by:

Except for having to make some minor modifications to my flanges (they were bowed out between the bolt holes) so the actuators were clearing the flange, the install was easy. The flange issue is not the valve manufacturers fault, just how the flange was made. My old valves were cable style and cheap and these will be a great upgrade on Leaky crappy valves. I was tired of getting the sewer surprise every time I dumped. etrailer delivered on time and at a good value.



by:

Every things was in the package , arrive at the time its was schedule .
The installation went very good and easy , to dot it your self if you are manuel its will work find.
I change a existing cable valve with this electric waste valve , the only bad situation was to work under the RV .
The valve work great .



by:

I replaced the 2 manual valves with 2 E40A-8’s...one of the best upgrades I’ve done with my Renegade RV.... Easy installation......Great product..... Great price..... Thanks etrailer.... You’re still the best.....



by:

After one year these valves have been flawless. I added one for black and one for grey tank on our Montana 5th wheel. So much better than the stiff cable valves it had from the factory that never completly closed.



by:

This is such a great product,I don't know why it is not an option more often on a rv.I installed the control switch inside my rv near a window that looks out on the sewer connection.I have the clear 3" elbows on both hose ends of my sewer hose,and can observe from inside, the operation of emptying my black tank.Being able to do so during rainy or cold weather is such a great luxury.I have had this in operation for about a year now and it has performed flawlessly.I chose this brand over others due to the ability to manually operate valve in event of a power loss.Installation was very simple and instructions were very detailed.Will never have a rv without one now.



by:

I bought this item hoping it would fix the issues I had with the factory installed cable, NOPE. This part is no better than the cable system. The clip that hold the valve handle to the electric motor doesn’t clip on correctly, I even tried making it work with zip ties, it worked for maybe two weeks, now I just crawl under the RV and operate it manually. Don’t waste your money.



by:

Was originally thold the items would not ship until the week of the 10th, almost a full week after my order was placed. When I called about the order was told it was out of stock. But their website said instock. I recieved the order this afternoon on the 10th. I have been overall very happy with Etrialer and will continue to order from them. As far as the valve, install is tomorrow



by:

So far a very good valve. I just removed the old cable valve and this slipped right into it's place.
There was one little surprise, the instructions did not indicate which 12v wire was positive. There is a black and white wire. I assumed black was positive, it's not. So of course the valve opened when I connected the wires.



by:

I would recommend this product to anyone who has long remote pull drains.
It made both the black and gray water work without a hitch. Just smooth full open to full closed. Well worth the money. Install them myself with the help of my son. They bolted right up no problem.



by:

This was the 3rd valve I put on it. This one was working when I traded the RV in on a newer keystone Avalanche. Has manual waste tank pulls which I will keep.



by:

The Drain Master cam-lock waste water hose is second to none, but after having to use a small allen wrench to manually open/close a failed Drain Master black tank valve, I replaced both with this Valterra assembly. They require a fair amount of space above them to open, but it is much easier to manually operate them, if necessary. They are well-constructed. No leaks, no problems after a year of use, and etrailer offered quick delivery and excellent customer service.

Keep in mind-- the switches are a rocker design that makes open/close positions less obvious, and in bright sun, the red led may be hard to see. I learned this while flushing out my black tank. After I was finished, I reinserted the stopper, thinking the black tank valve was closed. The next time I went to drain the tanks, I took the stopper out, and had a 40 gallon gusher of raw sewage! One thing I can say about all my RV mistakes- I never repeat them!



by:

Nice valve, well built. Everything needed for the install is included. Valve opens and closes quickly. This valve replaced a leaking cable valve that was in a tight position requiring an excessive angle on the cable. Problem solved with this electric valve. I installed a 5" access port in the belly pan in case of failure. Will allow me to empty my tank without having to drop the belly pan.

My only complaint is that the switch plate will not fit a single or double gang electrical box. Had to make my own since there was no room to mount the switch plate on my panel.



by:

I am more than satisfied with this product. We purchased a brand New Renegade Vienna MH, on a Mercedes Chassis. It is a very nice Motor Home, but the very tight spaces underneath the rear caused the (cable pull) Valves very hard to pull and would not close all the way. To our disappointment the manufacturer could not make them work to my satisfaction. A independent repair facility near us suggested the Valterra Electric valves. The manual valves that were on the MH already were Valterra, so the switch was extremely easy. BEST DECISION I've made in years. I 100% suggest this product


25
90
Show More Reviews

See what our Experts say about this Valterra RV Waste Valves

  • Valterra EZ Valve Double Electric Waste Valves Wire Length
    I went out to the warehouse and measured the wires on the Valterra EZ Valve Double Electric Waste Valves - Rotating - (2) 3" Hubs to 3" Lug Fitting # E84-8. The wires that will hook up to power are almost 81 inches, like 80-5/8. As long as you have to space and can route the wires how you need them you will be able to mount the switches where you want them. It can be installed on a Forest River GT7 36K7.
    view full answer...
  • Can Valve Assemblies on Valterra EZ Valve Double Electric Waste Valves # E84-8 Be Rotated
    Yes, both valve assemblies on the Valterra EZ Valve Double Electric Waste Valves # E84-8 can be rotated. This will allow you to move them to the needed position for your application so you have clearance for the T-handles. I have attached a video review on a similar Valterra waste valve below just so you can actually see the rotating action.
    view full answer...
  • Can The Valterra Electric Waste Valve # E84-8 Replace A Manual Waste Valve
    The Valterra EZ Valve Double Electric Waste Valves # E84-8 comes with two 3" hub fittings (hubs slip over 3" diameter pipe). That being said, If your pipes line up to fit the # E84-8 then I would just undo the bolts on the hub flanges of both the # E84-8 and your current setup to swap the electric unit in place without having to cut or glue anything. From outer edge of the one flange to the outer edge of the other flange is approximately 8-3/4". You can take a quick measurement of your...
    view full answer...
  • Recommended Double Electric Waste Valves
    We have a solution for your double black water waste tanks but not the grey. I recommend the 3" Lug Fitting Valterra EZ Valve Double Electric Waste Valves with a rotating hubs, # E84-8. You can replace the OEM waste valves on your 2020 KZ Durango Gold 40ft 5th wheel with these electric ones so that you can open and close the valve with the flip of a switch.
    view full answer...
  • How Much Clearance Is Needed for the Valterra EZ Valve Double Electric Waste Valves
    The Valterra EZ Valve Double Electric Waste Valves part # E84-8 can really be made to work on any trailer with some slight modifications. The valves can be reconfigured to orient in any direction and the main outlet can be rotated. Unfortunately, the manufacturer does not provide us with any detailed dimensional drawings but we've gathered some. The overall length is 12" but the main thing you need to account for is the height which is 11-1/2" with the valve closed and 15-1/4" while open....
    view full answer...
  • How Long are the Wires on the Valterra EZ Valve Double Electric Waste Valves Part # E84-8
    I went out to our warehouse to measure the Valterra EZ Valve Double Electric Waste Valves part # E84-8 for you. The wire lead on the actual valve is about 8-1/2" long whereas the wire lead on the switch is about 7' long for each valve/switch. If you just need the electric valves then we do offer them separately, the Valterra EZ Valve Electric Waste Valve part # E40-8 (3" Hub to 3" Spigot) or the Valterra EZ Valve Electric Waste Valve part # E40A-8 (3" Spigot to 3" Spigot). Unfortunately,...
    view full answer...
    Image 1 for
  • Can Valterra Bladex Waste Valve for RV Black Water Tanks be Used with Automatic Black Water Drain
    Yes, you could use Valterra Bladex Waste Valve for RV Black Water Tank - 3" Hub to 3" Spigot Item # T40 with an automatic black water draining system such as Valterra EZ Valve Electric Waste Valve - 3" Hub x Hub x Bayonet - Double Rotating Flange # E84-8.
    view full answer...
  • What is the Difference Between Valterra EZ Valve Electric Waste Valves # E85-8 and # E84-8
    The difference between the Valterra EZ Valve Electric Waste Valves # E85-8 and # E84-8 is the design of the center output tube. On # E85-8 it's a straight, regular hub. On # E84-8 the center tube has bayonet fittings. Based on your pictures you would need # E84-8. However, the input size of either hub is 3 inches so your smaller tubes would not fit without adapting to the tubing size you have up to a 3 inch mating tube to fit the E84-8. It looks like the smaller tubes are 1-1/2 inch (measure...
    view full answer...
    Image 1 for
  • Recommended Electric Dump Valves for 2014 Sanibel 3600 5th Wheel Trailer
    For the electric valves, we only have the 3 inch options. We have the hub to hub # E40B-8, the hub to spigot # E40-8, or the spigot to spigot # E40A-8. If you were to convert your 1-1/2 inch to a 3 inch, we do have the double 3 inch electric valves with 3 inch hubs # E85-8 or 3 inch hubs to lug fitting # E84-8. For your slide-out seal, I assume you are referring to weather strip tape like # WS1412 which can be combined with silicone sealants like # 0160297 for extra water protection....
    view full answer...
  • Connection Questions About Valterra EZ Valve Double Electric Waste Valves
    The term, "rotating hubs to lug fitting" means that this product has hubs that slide over your current 3 inch pipes. Once the pipes are inside the hub it is cemented in place with part # A05-0303. This process is different than the fitting on your older valves so you won't need the fernco connectors to connect the fittings and to keep them in place. As long as your existing pipes are 3" the EZ Valve part # E84-8 will fit over your pipes. Then you connect your sewer hose to the lug fitting...
    view full answer...
  • Can EZ Valves be Removed from Valterra Electric Waste Valves and Replace Current Waste Valves
    If both of your current waste valves are for 3" sewer pipes then yes, you can definitely remove the valves from the Valterra EZ Valve Double Electric Waste Valves # E84-8 and install them in your WYE fitting. If you have one 3" and then a smaller 1.5" on your WYE fitting then this will cause problems as the 3" valves are bigger than the 1.5" vlaves. They don't use universal valves. You can possibly use some adapters though and fit 3" sewer pipes around 1.5" sewer pipes if you really...
    view full answer...
  • Upgrading To Electronically Controlled Waste Valves
    If you're wanting to have an electronically controlled valve for just the gray tank then you can use the Valterra EZ Valve Electric Waste Valve for RV Black Water Tank - 3" Hub to 3" Hub # E40B-8 along with a reducer # T1041-1 to make the connection between the valve and gray water pipe. There currently are no electronically controlled valves with a 1-1/2" opening so you'll have to use a black water tank valve to accomplish this. You could also use the Valterra EZ Valve Double Electric...
    view full answer...
  • What Replacement 3-Outlet Elbow with Waste Water Valves do I Need for My Motorhome?
    From the sound of your question, it looks like you need either the Bristol Double RV Waste Valves - Elbow - Rotating # 34466ND14AAR (if you have 3" and 1.5" Hubs to 3" Spigot) or the # 34466NDHR19AAA (if you have 3" Hubs on both sides). Both of these models come with rotating valves and gates. If you are looking for something a bit fancier and easy to use, that is the Valterra EZ Valve Double Electric Waste Valves - Rotating # E84-8. This comes with 3" hubs on both sides and functions...
    view full answer...
  • Recommended Black Water Drains Transitioning To 4 Inch PVC Pipe
    To connect your RV to a 4 inch PVC pipe, I recommend the EZ Coupler 4-in-1 Threaded RV Sewer Adapter with 90-Degree Elbow Fitting - Clear # F02-3112CL. This adapter will transition from the standard 3 inch RV black water connections to the threaded 4 inch PVC. For your 3 inch connections, you may be interested in the Camco RV Sewer Hose Straight Adapters w/ Bayonet and Lug Fittings and Clamps # CAM39543. To get your two lines into one, you may want the RhinoFLEX RV Sewer Hose "Y" Fitting...
    view full answer...
  • Can A Roadmaster Comfort Ride Suspension Be Installed A Trailer That Rides Slightly Nose High
    Yes, you can still install the Roadmaster Comfort Ride Leaf Spring Suspension Kit even though the trailer rides slightly nose high when coupled to the tow vehicle. When installing one of these kits you'll most likely need to get longer U-bolts since there typically aren't enough threads to accommodate the additional mounting brackets. To determine the right kit and U-bolts you'll need to know the capacity and diameter of your axles and how many axles your trailer has. 3.5k 2-3/8" Tandem...
    view full answer...

Do you have a question about this RV Waste Valve?


Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Ryan G
Installed by:
Ryan G
Employee Joshua S
Video Edited:
Joshua S
Employee Amy B
Written by:
Amy B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.