Search: spring bushings   >  

Assuming your tires are in good shape without any bulges the easiest way to determine if you have a bent spindle is to take a straight edge that is longer than the tire and lay it across the tire parallel with your trailer frame and then measure…

So first I want to verify how you measured the leaf springs. On the etrailer Rust-Resistant 6-Leaf Double Eye Spring for 6K Trailer Axles #e88SR the 26" measurement is from center of leaf spring hole to center of leaf spring hole when the…

The left side is the driver side, right side is passenger side. On a trailer brake assembly like #23-105 the arm that the magnet is on points to the front of the trailer and the magnet always will be on the bottom. I have included a picture that…

We carry one 5 spoke utility style hub similar to yours #8-174-5UC3 which uses this inner bearing #25580 and this outer bearing #15123. I do not have any 5 lug replacements using these bearings, but I do have a 6 on 5-1/2 that will work…

The 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles - 26-1/4inch Long Item #e33SR that you referenced does not require an additional bushing for the hook end to attach to the rear hanger. The hook end of the spring will rest on the…

Hey Rob, The Replacement U-Bolt Axle Mounting Hardware Kit #LC27XV comes with U-bolts that are 7" in total length, 5" of length from the threads to the start of the bend, and 1-7/8" thread length.

Yes, you can switch from using a Tang Washer #5-101 to the Spindle Nut Kit #RG05-100. This kit includes 2 Retainers #6-190, 2 Nuts #6-191 and 2 D-Washers #5-23.

You will need the Dexter Heavy-Duty Suspension Kit #K71-448-00 for your 2015 Nitro Z8 boat trailer. This kit has the same triangle shaped equalizer as your current trailer. Also included are new shackle straps, wet bolts and bronze bushings for your…

When lining up the axis of the wet bolts it does not matter if the 90 degrees is forward or back. As long as it's either you are good!

The Redline Step Wet Bolt #34007-187-00 has a thread size of 7/16 inches. The rest of the bolt measures 9/16 inches.

Based on the photo and information you provided, I can tell you have 12 x 2 inch Dexter brake assemblies for 5.2K axles, for which the Electric Trailer Brake Kit #AKEBRK-7-SA will be an excellent replacement. These are self-adjusting brakes so they…

A Nylon Bushing #TRBU11561 is not required to be used on the open end of the 4-Leaf Slipper Spring #e33SR. Since the bushing is not going to be fully encased it stands that under the weight of the trailer it will fail and break apart more easily. I…