Hello Xavier, thanks for reaching out. We do offer a 7-way wiring harness for the 2017 Honda Pilot. For that you can use the following: - T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector #118286 The video linked below…
Hi Tim, I get why you’d want to go with a solid red lens to keep things simple and consistent. For the Peterson part #PM445, there isn’t a solid red replacement lens offered for that housing. That light is designed as a combination unit with a built…
The main difference between a ST205/75-14 size tire like the Contender #AC14R45SM and a ST215/75-14 size tire like the Taskmaster Provider Item #TTWTR21514 is that the larger number is a slightly larger size. The 205 has a section width of 7.99"…
This is going to be one of these "definite maybe" type answers, Skip. Is it possible? Well yeah, anything is possible with enough imagination and hard work. So with that said, I think the two spare tire carriers I have below will be the…
We may have a replacement hub for your Dayton Fayette 9254, but the only way to be sure is by determining which bearing combination and grease seal your spindle uses. You will need to remove one of the hubs and look for the bearing numbers stamped in…
To replace your 12" brakes I recommend checking out the 7K TruRyde Electric Trailer Brake Kit #TRU96FR or the 5.2K - 7K Hydraulic Trailer Brake Kit #AKUBRK-7 depending on what kind of braking system you have. You'll also need the Mounting…
Usually the actual part numbers for a trailer light will be found on the light's base or on its rear surface. The DOT codes you found on the lens are not part numbers, but since you took measurements of the lens we can check for a replacement red…
The lens you need is #A31AB. It fits clearance light #MC31AB which is 4 inches long, 2-1/16 inches tall, and 1-3/32 inches deep overall. Optronics has an MC and MCL series but not just an M and the lens is not replaceable on the MCL version of the…
The number on the lens is not a part number. It is a rating for the lens/light. Based on that number it looks like the best match we have is #A31RB which is rated SAE AP2 86. The A in the number just means that it has a built-in reflector.
Hey Adam, 24-5/8" is a standard sizing for 2,000lb leaf springs so the 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long #e69SR is what you need. It unfortunately doesn't look like we offer a slipper spring…
The clip that you are talking about that is on your leaf spring, like part #e54SR, is called the rebound clip. It keeps the main leaf spring from breaking on a rebound. Typically the band is located on the front-most side of the trailer but it…
Filters
