bing tracking image
Customer Service My Orders
  1. Home
  2. Help Videos And Articles
  3. Accessories and Parts Help Hub
  4. Accessories and Parts Q&As
  5. Question 570019
Q & A Icon

Determining If We Have A Replacement For A Dayton Fayette 9254 Hub and Drum Assembly  

Published 10/01/2021



Question:

I have an old school mobile home/ utility trailer. Im looking for the hub/drum and its bearing kit. To do have it?

1

Helpful Expert Reply:

We may have a replacement hub for your Dayton Fayette 9254, but the only way to be sure is by determining which bearing combination and grease seal your spindle uses.

You will need to remove one of the hubs and look for the bearing numbers stamped in the face of each bearing as shown in the included picture of the # L44649.

If the bearings are worn to the point that you cannot read the bearing numbers you will need to use digital calipers # PTW80157 to precisely measure your spindles in the locations shown in the included diagram, but either way you will need to measure the spindle to determine the correct grease seal.

If you can provide this information I would be happy to make a recommendation for you.

expert reply by:
1
Samuel C
Bearing Number Stamped In Face Of Bearing
Bearing Number Stamped In Face Of Bearing
(click to enlarge)
Where To Measure Spindle To Determine Inner/Outer Bearing and Grease Seal
Where To Measure Spindle To Determine Inner/Outer Bearing and Grease Seal
(click to enlarge)
Customer Picture
Customer Picture
(click to enlarge)
Customer Picture
Customer Picture
(click to enlarge)

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>