Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The wiring color codes and wire gauge recommendations for the Pollak Heavy-Duty, 7-Pole, Round Pin, Trailer Wiring Connector, item #PK11700, are listed below. White - Ground Return - 8 gauge Black - Clearance, Side Marker, Identification - 12 gauge…
view full answer...Most of the 2-5/16 inch hitch balls will use either a 1-inch diameter shank or 1-1/4 inch diameter shank. The nut size on a hitch ball with a 1-1/4 inch shank, like the Tow Ready 2-5/16 Inch Hitch Ball, part #19286, will use a 1-7/8 inch socket. A…
view full answer...Yes, the range of 900 lbs to 1,500 lbs that you see on the Strait-Line Weight Distribution System #RP66130 that you referenced represents the tongue weight range the spring bars are designed to work on. I attached an FAQ article on determining tongue…
view full answer...Since you have electric stabilizers on your RV you would only use 4 of the arms that come with the part #LC191025. If you check out the install instructions link I attached you can see that your setup is shown in figure 3.
view full answer...Thanks for the picture. What you would need is the part #RP26002 that you referenced. The Dual Cam systems like what is in the picture has gone through several changes over the years. You have an older version that is outdated so replacing it with…
view full answer...To see all the included components of the Reese Dual Cam High-Performance Sway Control #RP26002 check out the picture I attached. You will still need to use the chain hangers and chains of your current weight distribution setup. I attached a link to…
view full answer...The Reese and Draw-Tite products are manufactured by the same parent company, this means that the #26102 and #26002, Dual Cam Sway Control systems are the same, but there is a difference in the generations of the systems. The older systems had Hanger…
view full answer...The 26001 arms are no longer available and have been replaced by the Reese Dual Cam High-Performance Sway Control #RP26002. These are sold as a pair and not individually, so you would need to get both, and since you don't want to mix old parts…
view full answer...You have a very old system there! You would not be able to add dual-cam sway control #RP26002 to this system. Dual-cam systems require the bars with the cam hook ends and will not work with tapered straight bars. The system would not be a #PS49582…
view full answer...Filter Your Search
Contact and Help