Result: hubcap

Yes, it will Beau. The Dexstar Conventional Steel Wheel w/ +0.5" Offset - 16" x 6" Rim - 8 on 6-1/2 item #AM20766 has the lip built into it to work with a 12" Diameter Baby Moon Hubcap like item #PX1309SS. What kind of vehicle or…

I believe the wheel that they are refering to is the Dexstar Conventional Steel Wheel #AM20766. This has the same 8 on 6-1/2" lug pattern that the 1953 Chevrolet Advance Design Trucks had. This wheel is only 16" in diameter where the…

You will have to look at the original light to determine the manufacturer and model number. If it is listed on the light it will be on the light housing somewhere (not the lens). If it is not, then you have to go by the measurements of the light.…

Appreciate the photos, and yes, the trim you asked about does look to be exactly what you are needing: - Even Rub Rail Trim for Enclosed Trailer - 1-1/2" Tall x 1/8" Deep - Aluminum #36284-955 This trim is 93-1/2" long, so if…

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

You can measure the diameter of the wheel and the diameter of the baby moon mounting ridge on the wheel if you care to (see photo), but because the Dexstar Conventional Steel Wheel you have is a standard automotive size, you can simply purchase…

When measuring the offset of a tire you need to measure from where the wheel mounts to the hub to the inside bead and outside bead, with the difference being the offset. The Vesper Steel Modular Trailer Wheel - 16 inch x 6 inch Rim - 8 on 6-1/2 -…

The #PX1309SS Phoenix USA Baby Moon hub caps are compatible with the #AM20766 Dexstar 16 inch conventional steel wheel you referenced. This being said, we sell these wheels as trailer wheels. They aren't intended for use on a passenger vehicle.

Hey Willis, we have one steel wheel that covers everything you are lookin for with the Dexstar part #AM20766 which is a 16 inch diameter steel wheel with an 8 on 6-1/2 inch bolt pattern and a .5 inch offset.

The best option we have for a vintage style hub cap is the Americana Baby Moon Trailer Wheel Center Cap part #AM90086 which is specific to the Dexstar Conventional Steel Wheel part #AM20766. I could not confirm fit of any other style hub cap for this…

To determine whether or not the Dexstar Conventional Steel Wheel w/ +0.5" Offset #AM20766 will fit your 1952 GMC Pickup you will simply need to compare the specs. The rim dimensions are 16" diameter x 6" wide Bolt pattern is 8 on 6-1/2…

Yes! The part you're looking for is the Dexstar Conventional Steel Wheel w/ +0.5" Offset - 16" x 6" Rim - 8 on 6-1/2 - Black #AM20766.