Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces 1 mirror-polished stainless steel wheel cover on the front or rear of your vehicle. Fits a 16", 8-lug wheel with 8 hand holes. This hubcap easily snaps into place - no hardware required.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello everybody, this is jeff at etrailer.com. Today, we're going to take a look at this replacement 16-inch Namsco wheel cover for eight lug wheels. It's for a quantity of one cover.Now this replacement wheel cover will fit over a wheel on the front or rear of your vehicle. You can see it has a nice low profile design, delivers a nice sleek look, and it is made of a 304 Stainless steel construction, which is very sturdy and rustproof. You can see it has a nice mirror finish on it to give you a nice eye catching shine to your wheel. And this is described as an eight hand hold design.
And what they're counting is these holes around the outer edge, so there's eight of them.Now the lug caps on these can be popped out, so you can access the lugs underneath. They're just held in by four clips. So they can be popped out to access your lugs. And if you notice on the back here, I want to zoom in so we can show you, it uses this nice snap in retention system and ensures that this hubcap won't wobble or fall off. There's no hardware required.
All you have to do is line this up with your wheel and push it on all the way to hold it into place.One thing I do want to mention when you go to install this, you do want to find a place where there's a cutout. You notice this area right here, there's a cutout and that's for the valve stem. So you want to make sure this lines up to the valve stem on your wheel, and then go ahead and install it, push it on that way that cut out, it keeps it from damaging your valve stem.A few specs on this. It is for a quantity of one wheel cover. The application again is for eight lug front or rear wheels.
Wheel diameter it fits is 16 inches.A couple of notes on this wheel cover. It will not fit the Budd wheels or the older split rims. The Budd wheels are the ones that are stud piloted wheels that have tapered stud holes, and they'll use lug nuts with a matching taper. And then the split rims are also an older design wheel that would have a split ring around the wheel that holds the tire to the wheel in case of a blowout. Both of those design wheels are older designs, so it will not fit either one of those, but it does fit all the other ones.But that should do it for the review on the replacement 16-inch Namsco wheel cover for eight lug wheels..
Average Customer Rating: 4.7 out of 5 stars (97 Customer Reviews)
Replaces 1 mirror-polished stainless steel wheel cover on the front or rear of your vehicle. Fits a 16", 8-lug wheel with 8 hand holes. This hubcap easily snaps into place - no hardware required.best hub caps i've ever ordered and i've ordered several they stay on great will order some more
Website is very easy to navigate and it only took a minute to find the wheel cover.
I think customer service is great. Within an hour of placing my order I received an email stating order was processed and waiting UPS pickup. Had it not been for the weekend delivery would have been within three days.
This is the second time I had to buy a wheel cover for my Class C RV because service techs fail to properly replace it after dual tire pressure check. Wheel cover looks great and I can attest that the fit is snug and secure.
Donald
5/25/2022
They still look great.
I was really pleased to see the hubcap arrive today. But, 1., as I was putting it on with a simple nudge, the hubcap bent. 2. The valve stem opening isn’t sifficient and 3. One of the lug nut caps came off as I drove down the road. I have always trusted trailer, but this product which is supposed to be 304 stainless steel is definitely sub par.
Jenny N.
11/14/2023
To be honest we have heard of these issues before with the hub cap. Since it dented so quickly after ordering I will have our Customer Service team reach out to you. I was not sure what you mean when you say that the valve stem is not sufficient. When installing the hub cap you will want to find where the cut out is for the valve stem and make sure that it lines up with where the valve stem on the wheel. This would be the best way to keep it from damaging the valve stem,
The locking fins that hold it on are weak I have lost it just going down the road . Also was having to knock it back tight with my rubber mallet. Finally lost it on the road ..I’m glad you ask I need another one
Kelly was extremely helpful & personable on the call and my hubcap arrived quickly & in perfect condition. This is the 4th time I’ve ordered from etrailer and I’ll continue to do so
Fits perfectly, looks great! Delivered quickly too!
Perfect fit.
Just as described and fit perfectly thank you so much!
These are hard to find item and awesome. Thank you etrailer. Metal not plastic!
The idem fit perfect
Gary
10/30/2023
Perfect! thanx
The product came the day etrailer said it would and was exactly as described and what I needed. Thanks!
great quality great value
Exact fit, lock on tight but metal is t hin
Nice wheel cover have a pair on steering axel of class c dresses it up a bit more than stock covers.Had an over road semi shuck a trailer recap impact left front side damaged wheel cover thanks again for a good looking option wheel cover.
I had ordered some other replacement wheel covers from etrailer that were supposed to work, but they were also designed to fit 16.5" and/or 16" wheels. I have 16" wheels, and despite the fact that Namsco said that they were compatible, I couldn't get them to fit.
I called etrailer customer service and they accepted the return of the 16.5" wheels no questions asked. I then ordered 16" wheels and they worked like a charm.
etrailer is awesome!
I received my shipment. Thank you Molly for helping me find the right hub cap for my RV.
After losing another wheel cover after hitting some big potholes on my motorhome over time I have now replaced two of them with this model of Namsco wheel cover. While not of the original heavy metal quality, it does however do a great job of replacing it at a very reasonable price. It also goes on a lot easier with it's 360 degree attachments around the entire circumference of the hubcap making it easy to put on. It's a good replacement and they look great too.
Product is the same size and pattern so it matches the other wheel covers. The mounting was simple and looks to be secure. The description says “mirror finish” which I do not entirely agree with as there are many swirl marks on the surface. The center of the cover has a decent polish but the rest, not so much. If you need a replacement cover and don’t expect a polished, mirror surface, you should be satisfied.
On our last RV road trip lost our front wheel cover due to very rough strip of pavement. Our next road trip coming up in a few days so I needed a new wheel cover ASAP. Found your web page with the exact wheel cover I needed at a fair price. Your web page was clear and concise and easy to navigate which made ordering very easy. The wheel cover arrived in just a few days and was exactly what I had ordered.
Helpful, courteous order taker. Prompt shipping with tracking. Timely receipt of order. Very nice product.
William
9/16/2019
I wish I could comment but......the wheel cover came off as did the first replacement I bought. Not a very good product
I finally got to open my box and put it on and it was so flimsy feeling compared to my original one. In fact it already had a dent on it before I even opened it.
Jenny N.
2/10/2022
I will have our customer service team reach out to you.
I believe these are better material than the originals. At any rate they look great and I couldn't be happier. Thank you Etrailer.
I purchased two. One center piece came out with a tire change and another while driving. I would not buy them again. They are thin so you have to careful when installing so as not to create a dent.
You guys are great, I bought from you once before and no problems.. Today I received my wheel cover and it didn't fit properly. I was worried that it would stick out like a sore thumb but after beating it on with a rubber mallet it finally fit. I seriously don't think it will last. I'm disappointed in product, but not with etrailer.
Service was great. Paula was very helpful and the item came exactly as promised. I would definitely use etrailer.com again for any need I might have.
Do you have a question about this Wheel Covers Hubcap?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Virgil
4/20/2024
excellent