Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
I do say those welds are bad and it appears the bumper is simply welded onto the back plate of the trailer rather than the frame. I recommend removing the entire bumper for the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper #MNT43VR which…
view full answer...In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…
view full answer...Yes, I can confirm that the 24x40 etrailer Cargo Carrier for RV Bumper #e99050 does include the bumper safety struts #MO22FR you're referencing.
view full answer...In order to upgrade from the Furrion RV Stereo part #DV3100 which is a single din to a double din such as the Furrion RV Stereo part #DV1230BL you will need to remove the plug from the old harness and splice in the one that comes with the new stereo.…
view full answer...If you've reset your DV3100, and you know the connection to the speakers is good, it sounds like it's simply shot and the best thing to do is replace it with a higher-quality unit. For that I recommend an option from Jensen: - Jensen RV…
view full answer...The Mount-n-Lock SafetyStruts Universal Kit #MO34VR includes the Standoff Spacers #MO54VR along with drill bits and the components found in the Standard Kit #MO22FR. The standoff spacers allow for mounting on I-beams shorter than 6".
view full answer...I have an alternate solution for you. But the Mount-n-Lock GennyGo Generator and Cargo Carriers like the #MNT34FR all measure 24-1/4" x 24-1/4" and are not expandable. For a generator your size, your best option will be a cargo carrier like…
view full answer...The 24x40 etrailer Cargo Carrier for RV Bumper, #e99050 and the 24x60 etrailer version, #e99049 each have a similar design other than length and each have available option of using the 24" Extension, #e99052 to widen the carrier. These are built…
view full answer...The mounting brackets for the 24x60 etrailer Cargo Carrier for RV Bumper - Steel - Folding - 500 lbs #e99049 are spaced apart 27.5". The carrier is going to sit away from the brackets approximately 1/2" and higher 1-1/2" to allow for…
view full answer...Yes, the 24x64 etrailer Cargo Carrier for RV Bumper, #e83YR is the built the same as the shorter version but with an extension to increase width. From the images you attached, if you remove the spare tire, you can install the 24x40 etrailer Cargo…
view full answer...The inner diameters of the LM67048 and 15123 both are the same (1.250 inches). That means that a hub with either bearing in the outer bearing would fit your spindle. The part #AKHD-655-6-EZ-K would fit your axle.
view full answer...The Mount-n-Lock ShakeStopper for 6" RV Bumpers - 2" Hitch Receiver - 400 lbs #MO64VR will work work like a standard 2 inch hitch receiver when it comes to accessories. It has a 400 pound limit but that will mostly likely exceed your…
view full answer...Filter Your Search
Contact and Help