Search: fender mounting brackets   >  

We have a couple tandem trailer fenders that are 10-3/4 inches wide like with the part #HP84VR and the #HP74VR which are both 72 inches in length but at the 68 inch length of the #HP64VR

The Jeep-style trailer fender you referenced, Redline Single Axle Steel Trailer Fender #J10821, does fit 10-inch wheels and is a weld-on application. Your tire size, 20.5 x 8 - 10, has a modern metric size equivalent of 205/65-10 and this size fits…

Your statement (I have heard others say that you should never mix marine grease with general purpose grease, but mixing different brands of marine grease wont hurt.) sums up the way I have used grease all of my life. Being raised around all kinds of…

The reverse lockout solenoid wiring of your #DM62VR is not polarity specific. This means that you can use either as the power wire or the ground from your reverse light circuit. As long as one has power and the other ground you are good.

I looked on Demco's website and was able to pull some information and diagrams on how you would mount the Demco Hydraulic Brake Actuator item #DM8609101. I have attached them below. I was not able to find any pictures of this Actuator installed.…

Thanks for the pictures! The Titan Zinc-Plated Brake Actuator item #T43397007K fits a 3" wide channel, can fit 2 inch or 1-7/8 inch hitch balls, and has a 7,000 lbs capacity. It is by far the best option to replace your old Titan Brake actuator.…

Your best route is to replace your entire surge brake assembly as Atwood no longer produces any parts for their brake actuators. The Titan Zinc-Plated Brake Actuator #T47457207K is going to be your best replacement available. It is specific to disc…

Yes you certainly can. In order to bolt-on a set of metal weld-on fenders such as the Single Axle Trailer Fender part #HP29VR you will need a set of mounting brackets such as the Mounting Brackets for Trailer Fender part #CE26098G-2. If you do not…

We have the mounting brackets you will be needing to mount the CE Smith Single Axle Trailer Fender, #CE17937G. The CE Smith Brackets for Trailer Fenders, #CE26098G-2, will allow you to connect the CE Smith fenders to your trailer. The brackets, like…

Hey Matt, it certainly may be possible to upgrade the tires on your utility trailer. Space limitations are the main thing to consider though. Our rule is that you want at least 3" between the tire and the wheel well/fender, and you want at least…

I can understand that if your boat is loaded on the trailer, you don't want to remove one of the wheels to measure the fenders. Measuring a fender with the tire still mounted can be tricky, but it's not impossible. I've provided a diagram…

The Fulton Single Axle Trailer Fender #F008583 also comes in white, #F008573 and silver, #F008593. The mounting bracket slots are 28 inches apart inside to inside. This measurement will matter more than the overall length of 40 inches. If you find…