To remove a stuck CD/DVD from your iRV RV Stereo - Single DIN - AUX/USB, Bluetooth, App Control - 50W - 3 Zone - 12V #292-101809, I suggest resetting the stereo by powering it off and then powering it on again. Then firmly press the eject button to…
The brake assemblies you have are 7k Dexter assemblies that are 12 inch by 2 inch in size. The part number #AKEBRK-7-SA will work as a great replacement set. This includes assemblies for both sides of your trailer that are self adjusting.
Hey Timothy, since you need about 15 inches of extension and you have a Lock N Roll setup your best option would be just to go with the part #336TS520 which has 15 inches of extension built into it. Would that work for you?
Hey Keith, The Furrion Tankless #FR93FR will fit into that cutout you have and be a good replacement. The water heater itself is 12-5/6 x 12-5/8 fitting nicely into your 13 x13 cutout. The depth of the heater itself is 19-1/4 which should fit nicely.…
From my available specs on your M1101 trailer, it has a maximum vehicle weight of 3,400 pounds. It also looks like it uses off-road tires. With that capacity and tire type, we only carry 2,000 pound Timbren Axleless systems that are compatible with…
Thanks for the picture Richard, I can tell by your picture you have a Model 6 surge actuator on your trailer which the #T4846500183 is the correct replacement for if you were wanting a channel style inner slide member replacement.
The Stromberg Carlson Trailer Tray Cargo Carrier for A-Frame Trailers #CC-255 requires room for the tray and the upright supports. There are many different fit options as the upright supports can rotate for the precise fit. I've attached all the…
The Timbren 3.5k Axle Less System part #ASR35HDS02 that you referenced does require higher capacity hubs than what you currently have. For a hub/drum that is the same as your current hubs you would want the part #8-201-9UC3-EZ. This hub comes with…
For an upgrade over the Drive stereo you have now the Jensen Stereo part #JWM60A that you referenced is our best choice. It essentially has all of the same features as the Drive while being a bit more reliable. It's designed for RV in-wall…
Hey Nick, thanks for reaching out. If you’re thinking about welding the bolt-on Lock N Roll coupler onto your A-frame, I’d skip that idea. That version’s meant to be bolted, not welded. It’s painted and has pre-drilled holes, which makes it a bad…
Hey Jose, do you know how wide the channel is on your trailer tongue? I would go with the Lock N Roll Articulating setup but the correct trailer side coupler will be based on the width of your tongue. I looked up pictures of your 2023 Intech Flyer…
Filters
