Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Welcome back! I have a couple of options for you depending on what is currently on your Palisade's roof. If your 2020 Hyundai Palisade has a naked roof you will need the following parts to mount two Thule Hullavator item #TH898. BaseLine Towers…
view full answer...Hey James, yes the Thule TracRac CapRac part #TH29200XT will work for a roof rack that fits the top channels that are on your cap and is compatible with the Thule Hullavator kayak carrier part #TH898 as it can attach to the top channels of the load…
view full answer...Hello Nancy, thanks for reaching out. We do have roof rack options for your 2024 Ram 2500 big horn crew cab, but sadly we do not have a fit for the Thule wingbars, so you will need to go with something different. For that I recommend going with a…
view full answer...Hi Ben; unfortunately, the Thule Hullavator Pro #TH898 will not fit your Hyundai factory roof rack. The Hullavator requires crossbars that extend 4" - 8" beyond the feet for proper clearance so you will need to put on an aftermarket rack to…
view full answer...Hey Chad, so I'd actually recommend a mid size ladder rack like the Yakima OutPost HD Overland Truck Bed Rack #Y01152-58. This is by far going to be your best bet if you don't want to trailer your kayaks. These bars have a 500 lb weight…
view full answer...The Thule Hullavator Pro Kayak Carrier #TH898 is only compatible with the Yakima CoreBar crossbars if you also use the mounting kit #TH7520970001. Just be sure that you have the proper clearance (4" - 8" beyond the feet) for this to work…
view full answer...I have attached for you below a detailed dimensional drawing of the Curt Trailer Hitch Receiver part #C15800 which is a confirmed fit for the vehicles listed below. The trailer hitch has a class V rating with 2-1/2" opening which is great for…
view full answer...Good question, and in regards to the width of the Thule Hullavator Pro #TH898, it is 36 inches, though its mounting takes up crossbar space of only 28-1/2 inches because a portion of it will be over the edge of the crossbar (see the accompanying…
view full answer...The Thule Hullavator part #TH898 is a really great option for a load assist kayak carrier that would work great for you but it does require an aftermarket roof rack install on your 2021 Subaru Outback as it requires the crossbars of the rack to…
view full answer...It does not. I checked with Thule and they list a Thule WingBar Edge Crossbar item #TH29RE and a Edge Flush Rail Feet item #TH89SC as parts fitting a 2021 Hyundai Palisade with side rails. You would need the Thule 186008 to install this system and I…
view full answer...It depends on what kind of roof you have on your 2021 Hyundai Palisade. If you have the the raised side rails you can use this kit that uses the Yakima Jetstream Crossbars #Y00425 The Ridgeline Towers #Y00145 and the ridgeclip #Y89FR. This leaves…
view full answer...There is a solution which is going to help save your kayaks from any further damage. To mount them on your TracRac TA27000-01 I recommend using the Malone Foam Kayak Block #MPG159. These are going to fit directly over the four-inch bars on your…
view full answer...Filter Your Search
Contact and Help