Search: curt basket cargo carrier   >  

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350…

The Curt Cargo Carrier #C18113 will definitely work with the etrailer #e25TR on your 2024 Outback. Keep in mind, you will be limited to the 350 lb max tongue weight of the hitch or the max tongue weight of your vehicle. Whichever is lower is what…

I measured the distance of the hitch pin hole to the front of the Curt Cargo Carrier for 2" Hitches #C18113 and found it was 29 inches from the center of the hitch pin hole to the furthest part (the front) of the carrier, as you can see in…

The hitch I recommend for your 2016 Subaru Forster which is a confirmed fit for the XT model is the Draw-Tite #75876; which will not require you to use stabilizing straps for non-trailer loads like the Curt hitch does. The Draw-Tite is a Class III,…

For your 2018 Subaru Forester XT I recommend the Draw-Tite Class III Max Frame Receiver Hitch #76182 because it features a hidden design where only the receiver is visible beneath the vehicle. This provides you with a clean, OEM appearance unlike the…

We do have two carriers made in the USA. They are both enclosed carriers. They are very high quality, but they are much more expensive. We have the the LetsGoAero models #H00604 and #HGK819.

The picture I attached that you referenced shows how the shank of the 20x59 Curt Cargo Carrier part #C18151 should be installed. If it was installed opposite of this it would not fold up.

To measure clearance for an accessory installed in the hitch on your FJ you will want to measure from the center of the hitch pin hole rearward to the back edge of the spare tire, which is usually the rear-most part of the vehicle. I linked a helpful…

I went and grabbed a Curt Cargo Carrier part #C18151 to grab the pin hole dimensions you requested. From the pin hole to the end of the shank that slides into the hitch it measures 2-1/2 inches and from the pin hole to the nearest rails of the…

Here are the inner and outer dimensions for the Camco Gen-Turi items you asked about. Part #CAM44872 – OD is 2.94 inches and ID on the small end is 2.69 inches. Part #CAM44862 – OD is 1.51 inches and ID is 1.25 inches on the flared end. No dimensions…

The best trailer hitch option we offer for travel trailers is the Adjustable Width Trailer Hitch Receiver for RVs part #13703 as it's very universal and can fit pretty much any trailer due to the adjustable frame brackets and crosstube. It has a…

The 24x60 Curt Cargo Carrier for 2" Hitches - Steel - Folding - 500 lbs #C18152 does not require any lighting for use on or off the freeway. It technically doesn't require the reflectors either, but it has them to increase visibility and…