Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…
Hello Patrick, Great question. You do not need to use a primer on a brand new Superflex TPO roof membrane like the Alpha Systems #AL83CV when applying lap sealant. As long as you’re using a sealant that’s compatible with TPO, it’s designed to bond…
Hi Billy, The F500277 is for a Fulton trailer jack that is no longer in production. The 4 3/8" x 3 3/8" bracket measurements are typically from an older style weld on trailer jack, we used to have a version that fit those dimensions, but it…
Hey Hugh! Both the 5" #YR530R-5P and 4-3/8" #YR343R-5P Yates Ribbed Wobble Roller will work with the CE Smith Universal-Fit Split Panel Brackets for Boat Trailers #CE10500G. These are designed around a 5/8" shaft and the brackets fit…
Hi Mike, that’s a great question and I totally get why you’d want something that lines up with your existing holes and bolts right on without any guesswork. The honest answer is that the Fulton F2 uses a unique mounting pattern, so there really isn’t…
Hey Robert, we don't have any roller wheels that have large enough U-bolts to fit around 3 inch hitch tubing so best option would be a weld on roller like the Ultra Fab part #UF48-979023. Are you dragging on your driveway?
It is certainly possible for any axle to wear out enough over time to need replacing. Since the suspension is built into a torsion axle if the suspension part was to wear out pretty much the only solution would be to replace the axle. If the…
Hey Dave, it's great to hear from you again! The CE Smith U-Bolt - Zinc-Plated Steel - 3" Long x 3-1/8" Wide x 7/16" Diameter #CE15252A you were looking at could work for if the dimensions match what you currently have. You…
To attach the Fulton F2 Jack part #F1413040134 to a trailer with a 6 inch tall trailer frame you are going to have to use a weld-on bracket part #F500277 as there isn't a bolt-on style bracket that will fit a frame that tall. The weld-on bracket…
We have a solution that will work for you, but none of the bolt-on trailer jacks we offer are compatible with a 6 inch tall trailer frame. For a trailer frame of that height, I'd recommend you use a weld-on jack like part #FTJ120W0301. This jack…
The only bolt-on swivel jack we have that works with 6" tall trailer frames is the Trailer Valet 5X Swivel Jack and Trailer Mover part #STC-V211. The Trailer Valet has a 500 lb tongue weight capacity and works with frame rails up to 2-3/4"…
Hello Trent, thanks for reaching out. Does your RV happen to have a tow-rated bumper? If so, a great option for carrying/securing your generator is the 24x60 etrailer Enclosed Cargo Carrier for RV Bumper #e34VV. This attaches to a 4" or…
Filters
