Result: knobs

| The knob that you are needing is the Replacement Dome Control Locking Knob # MA74RR. | Looking for the correct replacement KNOB to fit with the following items on my Maxx Fan. Could you please send a link...

I find the shaft that i need, MA10-21232KSHAFT, but i also need the knob and the knob screw. I dont find those. Can you point me to the part number? | I find the shaft that i need, MA10-21232KSHAFT, but i also...

when turning the black knob, the vent housing will not open, like a piece is stripped out. are there replaceable parts for the opening knob operation? | when turning the black knob, the vent housing will not...

Could not locate the screw, but found remaining parts knob and shaft - no screw? The locking knob is threaded for 8-32 but it seems impossible that a 2 3/4 8-32 screw threaded through the operating knob would disappear. |

I spoke with MaxxAir rep who suggested replacing locking knob shaft, part# 10-21232K. Do you carry it? | I spoke with MaxxAir rep who suggested replacing locking knob shaft, part# 10-21232K. Do you carry it? | Yes, we do have...

The Replacement Locking Knob Screw # MA10-21241K normally threads into the Replacement Locking Knob Shaft # MA10-21232KSHAFT which it sounds like you may be missing. | bought the silver shaft for the fan to...

In my case the screw has sheared off inside of the shaft and the knob has fallen off but the shaft is still up there. | How do you get the shaft out of the fan? From below inside or above outside? In my case the screw has sheared...

The system does come with a remote control for convenient operation but you can still absolutely control the vent via the buttons or knob on the unit as well. I have attached a couple images pointing out the keypad and knob along with a short video review that you can also check out. |

My Mother-in-law has this fan in her RV, and the screw that holds the knob that opens and closes the lid fell out, and is no where to be found. | My Mother-in-law has this fan in her RV, and the screw that holds the knob that...

I contacted Maxxair and the Replacement Locking Knob Shaft Item # MA10-21232KSHAFT is in fact compatible with your MaxxFan Roof Vent Item # MA00A04401K. | Will this fit the MaxxAir Fan 00A04401K? | Great question! I contacted...

coleman mach 8330-715 serial 070044571 looking for inside grill knobs are on the end corners | coleman mach 8330-715 serial 070044571 looking for inside grill knobs are on the end corners | Though we do not sell The...

Hello, I have Max air fan 5100K about 10 years old and the lift knob mech. appears stipped. The locking knob shaft is square. | Hello, I have Max air fan 5100K about 10 years old and the lift knob mech....

I just installed my MaxxAir Mini Deluxe Fan, hook it up to power and turned the knob to fan, it fired right up! However when i turn the knob to fan/light mode or light mode only, nothing! | I just installed...

Hey Patricia, it shouldn't be that difficult to open the lid so I would look for something that's possibly interfering or a damaged component. Does the knob just turn or does it not want to move either? | We cannot open our...

Unfortunately not the knob itself is not an item that we carry. | I have a MaxxAir MaxxFan, model 4301K. The lid adjustment knob will not lockdowninch the lid completely so it flaps while in transit. Is it repairable and if...

So since it's already broken you can go ahead and force the lid up as it's going to get replaced any way. Does the knob turn on the inside at all? You might try having someone crank the knob while you lift on the lid or push it through the bottom and that might allow it to come up a bit easier. |

The black knob turns when the button is pressed and I can manually lift the lid with a stick. | The black knob turns when the button is pressed and I can manually lift the lid with a stick. I can not seem to pinpoint the issue...

The Maxxfan wont open on its own and the manual open knob is extremely tight to turn. Do we need a new operator? | Hi. We have a 2020 Revel. The Maxxfan wont open on its own and the manual open knob is extremely tight to turn....

When I manually turn the knob it will open but also sounds like its stripped. | Fan: maxxfan-white-4700k s/n 2013-04-4700k-0315 I have this fan in the bathroom. The fan works but the lid doesnt open. I can hear gear knocking...

You will however be able to manually open the lid using the knob. I've attached a video below where you can see Robert using the knob to manually open the lid. | Theres a comment in the coninch section: Want...

Every thing works except the cover not closing tight. The black knob turns but not tight enough. you can turn knob but it still doesnt close tight. | I have a Maxxair fan installed on 2013 Montana 5th wheel....

To determine the correct knob/operator replacement for your vent we would need to know the brand and model number. | Hi I have a 2017 Rpod 180tt. The vent on the roof will not open and the knob that turns to open/close it...

What lift operator works with this locking knob screw? | What lift operator works with this locking knob screw? | Hey Michael, the correct operator to use with a MaxxFan rv roof vent like what the the part # MA10-21241K is designed...

The panel which houses the light and control knob I would say is around 1/4" - 1/2" thick so that is all that would sit inside the trailer. | Does the bottom of this fan extend into the living quarters? If so, how much? | The...