Troubleshooting MaxxFan 4700K That Lid Doesn't Open

Question

Question:

Fan: maxxfan-white-4700k s/n 2013-04-4700k-0315 I have this fan in the bathroom. The fan works but the lid doesnt open. I can hear gear knocking sound. When I manually turn the knob it will open but also sounds like its stripped. Is there something I can replace with replacing the whole fan?

asked by: Debbie

0

Expert Reply:

It sounds like the operator mechanism is going out; normally you won't be able to even use the manual opening knob when this is the case, but saying that it's making the same sound leads me to believe that at some point in the near future that's going to stop working for you as well. To replace that on your MaxxFan 4700k you'll want to use the Replacement Operator Mechanism for MaxxAir MaxxFan Plus or MaxxFan Deluxe Roof Vents # MA10-20281K-1AF.

expert reply by: Erik B

0

Answer 1

I checked with Ventline and they longer provide the Replacement Spring Clip for Ventline Ventadome #VD0453-00vd0453-00 spring clip and we no longer sell them either. That said a full replacement lid like the Replacement Dome for Ventline Ventadome…

view full answer...

Answer 2

The difference between the MaxxFan part #MA00-07500K and #MA00-07000K is the color of the lid. The part #MA00-07500K has a smoke colored lid which is semi-transparent and the #MA00-07000K has a white lid that does not allow sunlight to pass through.

view full answer...

Answer 3

Hey Tashi, Your Fogatti wtare heater #LSB64FR is going to have a red wire to run to a 12v power source, black wire for your negative that you can just run to the frame with a ring terminal, and two blue wires that need to connect to the two blue…

view full answer...

Answer 4

The correct replacement lift motor for a Maxxair Vent Fan 4700K is the Replacement Lift Motor for Maxx Fan Plus Roof Vent part #MA10-20270.

view full answer...

Answer 5

The two most likely causes of a MaxxAir vent fan lid not opening or closing are either going to be a lift motor or operator failure. I recommend removing the motor and applying power directly to this to see if the shaft turns. If not, you know the…

view full answer...

Answer 6

Great questions I am glad you asked them. I have solutions for them. You will need the Demco SBS Second Vehicle Kit for Air Force One Supplemental Braking System #SM99209 and the Demco SBS Air Force One Coiled Air Jumper Kit for 2019 to Present…

view full answer...

Answer 7

Welcome back Rich and thanks for the information! To replace your Sharp Carousel microwave R-820BK-F, I recommend the Greystone Built-In RV Convection Microwave item #GR27FR. It measures 21" wide x 11" tall x 15-3/4" deep.…

view full answer...

Answer 8

Hi Denny, To replace your Lift operator you'll need to first manually open your MaxxFan #MA00-04500K using the lift knob. Then you'll need to get up on the roof. Once up on the roof you can press in on the lift arms #MA10-20222KS just enough…

view full answer...

Answer 9

The correct Replacement Operator Mechanism for your model 4751KS MaxxAir MaxxFan is part #MA10-20281K-1AF. If your fan lid is unable to open even manually, then this is the part you need to replace. The other part you referenced, #MA10A04751KS would…

view full answer...

Answer 10

When installing the #MA10-20281K-1AF replacement operator, you might need to 'clock' the mechanism slightly which could take a little bit of trial and error, but the replacement operator does include installation instructions. I've…

view full answer...

Answer 11

Hey Chris, yes the part #MC62YR does have the 50.336 motor like you are looking for.

view full answer...

Answer 12

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Troubleshooting MaxxFan 4700K That Lid Doesn't Open

Product Page this Question was Asked From

Continue Researching