Result: knobs

Do I need to replace each of the knobs, or can I get replacement locks? Assuming I need to replace the knobs using Part P1030 can I get knobs with matching locks so that I can unlock each of the knobs with the same key, as opposed to having to use a separate key for each knob? |

In Pix 1, the instruction says unscrew 2 wing knobs. However, I do not have these 2 wing knobs. | Hi Experts, I have a question regarding the manual for Thule #7533998 Retro-Fit Mounting Kit for 724/725. I...

We tried to follow these instructions to remove the cap on the knob so we can lock the bike rack to the tire assembly: Using screwdriver, remove plug from locking knob as shown. | We tried to follow these...

Im wondering if some threads on the knob shaft or the mounting plate have been stripped. | After 4 years of use, my Thule Spare Me bike rack no longer tightens all the way down. It starts spinning when its nearly completely...

If you're ok with losing your 12 volt outlet by your shifter you can use the Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob item # 331-TPSI-003 to install the knob. | I have been a long...

Including the Ford Style dash for the control knob. Thanks in advance. | I am interested on installing this controller on my 2020 Ford Ranger with factory tow package 7 pin. If I order this item, are there other parts I need...

If you check out the attached video of this controller being installed on a 2014 Jeep Grand Cherokee you can see that the control knob is actually mounted in the center console. Since the control knob doesn't have to be mounted in a specific orientation it really opens up the possibilities for installation. |

From there you can use the knob to fine tune it. Below are some pictures of how people have mounted the knob and a link to an install video for a 2021 Range. | 2025 ford ranger no tow package. XL trim, spray...

I have been looking at Redarc and Curt Spectrum Trailer Brake Controller - Dash Mounted Knob - Up to 4 Axles - Proportional - thank you | what brake controllers best fit a 2021 Ford Ranger Lariat with a factory tow package?...

You will then be able to turn the controller knob fully counter-clockwise, press the brake pedal, double click the brake knob twice within 1 second and then release the brake pedal this will change the light from blue to green. |

The main unit can be mounted in any position, and the control knob mounts in the dash of your vehicle. The knob uses a colored LED for diagnostics and works as a manual override when pressed. | I was looking...

This brake controller allows you to mount the main unit out of sight with the knob mounted in the dash. The knob allows for quick and easy adjustment and also functions as a manual override. | Can I use the...

All you see is the small LED control knob. It's easy to use and has a nice factory look that blends with the interior. | I have a 2023 RAV 4 TRD that needs to have an electric brake controller with 7 pin plug for towing a...

In the video you can see David easily completes the installation with the most difficult part being when he pops the 12v outlet out to replace it with the knob for the controller so that he doesn't have to drill a new hole in the dash to install the knob. |

The instructions dont indicate if you ever turn the knob to the right or if it is always on manual setting? | I had my brake controller professionally installed and am reviewing instructions now to use it with my trailer. I...

Once tighten, the knob has a lock cylinder that can be lock using the included key. | Does the Thule Easy fold fit the first outermost or the second innermost hole of my Draw Tite 2inch hitch ? Im trying to measure distances...

I see that the Redarc has a separate adjustment knob that you mount wherever desired. The knob then plugs into the control box and the Ranger factory wiring gets spliced into a 4-wire pigtail that then plugs into the controller to complete the installation. |

Didn’t know which Custom harness dash knob I would need. Thank you. | I have a 2024 Ford Ranger XLT with tow package. What do I need to order for this to be a plug n play install, also I would like the button to be mounted...

Adjust the feet to fit your mirror housing and then twist the tightening knob. Please note the attached product review and installation videos. | Do these sideview mirrors extensions fit well on the 2021 Ford Ranger? | The...

The knob adjusts the braking power and also acts as the manual override. | I need everything to tow a trailer with brakes with my 2021 Ford Ranger, hitch, wiring, ball, brake controller. What should I get for this? Can you...

Lightweight aluminum bars can support most kayaks, canoes, and rooftop cargo carriers. The locking knobs deter theft. | I need crossbars for my 2022 Toyota RAV4. I have the factory installed raised rails that run front to back....

You will also want 2 bolts # 915064554, 2 washer plates # 853-0333-02, and 2 of the Replacement 3-wing hand knob # 753-0745 to complete the rear mount to your crossbars. | does it come with cross bar mounts? | The Replacement...

I like the Redarc style with only the knob exposed | I have a 2022 Ford Ranger what trailer brake controller do I need. I like the Redarc style with only the knob exposed | The Redarc Tow-Pro Elite Brake Controller part # RED44FR...

It’s a really clean option because it uses a small dash mounted knob instead of a bulky controller, and it comes with a custom harness designed for Ford trucks like yours. | I have a 2025 ford ranger with factory tow hitch...