2016 Keystone Residence Travel Trailer RV Antenna and Radio

Thanks for reaching out, Michael! The Dexter Electric Trailer Brakes #K23-086-087-00 are compatible with 3,500 lb axles and have the standard 4-bolt pattern so if that matches the specs of your axle then this will definitely work for your…

It appears that all you going to need is the Replacement Lippert 4-Point Leveling System Control Brain Wiring Harness #LC178278. This wiring harness will allow you to plug your new Replacement Lippert Leveling Control Brain for 4-Point Leveling…

Hey there Hilda, thanks so much for your purchase of the Jensen Heavy-Duty Mechless Marine Stereo #JHD40BT. Technically you were told correctly - it does not need an antenna to operate, but if your reception is weak, I do think…

Yes, the Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans #FVK8017-00 you're looking at is the correct fan motor kit for your Fan-Tastic Vent Roof Vent 6500. This kit includes a bow tie bracket, a new…

Thank you for all of the info you gave. Based on that you'd want the trailer hub and drum part #AKHD-545-35-K that you referenced and then for brake assemblies to match you'd want the #AKEBRK-35-SA…

I recommend using the WeatherTech Front Auto Floor Mats #WT26DV on your 2023 Entegra Odyssey with the Ford E-450 chassis. These mats are custom fit for the E-450 cutaway chassis and have channels to help hold dirt and water.

The camera can be replaced with the Voyager RV Backup Camera w/ Night Vision in Black #VGR84VR. To adapt the new camera to your VOM74WP System you will need the Voyager DIN to ASA Monitor Cable Adapter #VGR54FR. This will match the 4 pin connector…

Thanks for the info you listed. Based on that the correct replacement motor is the part #LC295380.

Yes, the MORryde Suspension Upgrade Kit #MR46ZR can certainly be used with the Lippert Road Armor Equalizers. You will just want to be sure that the stock shackle links on your 2021 Cougar 29RKS are 2-1/4" long when…

Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since…

I do have everything you need to use a swivel wheel trailer on your 5th wheel trailer but we do not carry them nor do we have anything similar therefore you will need to source the trailer elsewhere. In order to use a swivel wheel trailer to haul…

The Lippert Landing Gear #LC712690 uses the Motor #LC142178. We also have the motor with the wiring kit #LC217884 if you need to replace the wiring as well.