2010 Acura ZDX Radiator Fan

Thanks for reaching out! Since your 2024 Toyota Grand Highlander doesn't come with the factory tow package you need the Curt Wiring Kit #C59236 which splices into your current…

Both of the 2" receivers on the TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual…

The method we use to determine the correct line to install a transmission cooler on is pretty simple. You want to install the cooler on the return line. To determine which line is the return line you will want to start with your truck totally…

The Flex-a-lite 16" LoBoy Electric Radiator Fan 2,500 CFM #FLX118 is the puller fan equivalent of the model #FLX119 you were looking at so if the…

To see installation details for both hitches, click the provided links. The Curt #C14011 installs using 18mm bolts that use existing nut plates in your Excursion's frame. No drilling…

The TorkLift SuperHitch Original Trailer Hitch Receiver part #TLF1006 is designed to be a direct bolt on installation. It offers a 1,700 lb. tongue weight rating when used typically or 2,000 lbs. when used with weight distributionand will takes…

I do have an option for you but we do not carry the exact replacement you are looking for. For your trailer, I recommend using the Dexter Equalizers part #13-140-3. These equalizers are almost an exact replacement for the ones you currently have.…

Electric fans do improve fuel mileage and power since they allow the accessory belt drive to turn with less resistance. I did the same conversion on an older Camaro years ago and it cooled better, improved mileage, and power.…

Yes, the Curt Trailer Hitch Receiver #13707 is a confirmed fit for both a 2003 Mercury Grand Marquis and a 2007 Lincoln Town Car. The replacement hardware can be found with part #RHK. You will simply click on the linked part and then select…

I do have an option for you but Atwood was bought out and their replacement parts are no longer available, including the repair kit you would need. The best option is to replace that A-frame coupler with a new one that attaches to a 2 inch hitch…

The standard measurement on landing gear legs is 15-1/2 inches between the tabs that are on the actual legs. Despite the 15 inch measurement you have between the brackets the distance is likely 15-1/2 inches between the tabs on the leg. Replacement…