3/4 inch D-Ring Adapter that Can be Used with Blue Ox Aventa Tow Bar

Question

Question:

Will these ends fit on a blue- ox Bx 7330 aventa tow bar,

asked by: Fb

0

Expert Reply:

Blue Ox has a similar adapter with the part # BX88358 which works with the Aventa tow bar and fits 3/4 inch D-rings but the part # RM-035 only fits Roadmaster tow bars so it wouldn't work for you.

expert reply by: Jameson C

0

Answer 1

With the brake controller set to its maximum setting, you should be getting 12 volts at the trailer connector when applying the manual lever. Since you are only getting 8.5 volts at the connector, the issue you are having is likely somewhere on the…

view full answer...

Answer 2

Yes, per the installation instructions, your 2014 Nissan Pathfinder with the Controller Area Network, or CAN Bus system, it is recommended by the manufacturer that you use the 30-amp circuit breaker kit #331-CBK30-EB. This, along with your Redarc…

view full answer...

Answer 3

I will be happy to clear up what all you will need to add the equipment to tow the trailer and activate the electric brakes. First, if your 2004 Nissan Xterra does not already have a trailer hitch you will need to add one. A popular option is Curt…

view full answer...

Answer 4

No, the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars #RM-035 is only compatible with Roadmaster branded tow bars. For a Roadmaster tow bar similar to your Demco Dominator I recommend the Roadmaster Nighthawk All…

view full answer...

Answer 5

No, having play in the your Roadmaster D-Ring Mount Adapters #RM-035-1 can cause friction which will lead to them failing. You'll want to measure the thickness of the your D-Ring mount and order accordingly. based on the picture you provided it…

view full answer...

Answer 6

The part of the adapter that attaches to the D-rings will have a fixed size pin; either 3/4 inch for #RM-035 or 1 inch for #RM-035-1. The other ends of these adapters attach to the tow bars. So neither one of the adapters will work with both 3/4 and…

view full answer...

Answer 7

For a 1 inch Blue Ox 1 inch aftermarket bumper adapter, you'll need part #BX88358. You'll want to confirm with the manufacturer of your bumper that it has a high enough weight rating to be used to tow the vehicle.

view full answer...

Answer 8

In order to flat-tow a 2021 Jeep Gladiator you'll need base plates, tow bar, safety cables, supplemental braking system, and a lighting kit. The Jeep is pretty easy to setup for flat-towing and you'll only need the basics for this. I have…

view full answer...

Answer 9

The Curt Custom Base Plate Kit #C59JR can not be used in the fashion you have pictured. Not only is it unsafe but it wouldn't connect to the tow bar the way you have it. Based on your picture it looks like you do not have the modular bumper and…

view full answer...

Answer 10

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 11

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 12

Hey Christian, welcome to the world of RV-ing! So in addition to the Roadmaster Nighthawk #RM-676 you're also goin to need: - A baseplate kit, like the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5. These attach to the Jeep itself so you…

view full answer...

3/4 inch D-Ring Adapter that Can be Used with Blue Ox Aventa Tow Bar

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching