Fold Down RV Step that Fits 2019 Puma 19RLC

Question

Question:

I have 2019puma19rlc I want to put steps that flip up in door what size do I need doorwaymeasures 24inch inside the flange almost 25 on frame 26 inch from ground what steps do I need

asked by: Tim R

0

Expert Reply:

The correct fitting fold down step that fits your 2019 Puma 19RLC is the Lippert StepAbove part # LC713662 which was designed for 24 inch wide doorways like you have and fits entry heights between 22 and 28 inches so your 26 inch measurement would work perfectly.

expert reply by: Jameson C

0

Answer 1

The bolt, or fastener screws, that come with the Replacement Hardware and Backer Plate for Lippert SolidStep Manual RV Steps #LC702580 are 10-24 x 4". This hardware is designed for Lippert SolidStep manual RV steps.

view full answer...

Answer 2

Yes, I verified with Lippert that the backer plate will fit the SolidStep 3.0 models with 24”, 26” and 30” widths; the correct part number is the following: - Replacement Hardware and Backer Plate for Lippert SolidStep Manual RV Steps #LC702580

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

You are right on. The 8" rise/drop on the MORryde StepAbove Fold-Down Steps #MR98RR is the height between the steps. The #MR48RR you were looking at has a 9" rise/drop meaning the distance between the steps is 9". The #MR98RR is…

view full answer...

Answer 6

Hey Jack! I would get the MORryde StepAbove RV Steps #MR98RR. These are for an entry height of 30" and 33-1/2" which will be the best option. Looks like you have 26" wide doors so this would be the correct part for your trailer. Worst…

view full answer...

Answer 7

Are there steps there currently? If so how many steps are on the assembly and what is the overall width? If you could email me a picture of them that would be helpful as well.

view full answer...

Answer 8

Hello Kristi, thanks for reaching out. The Furrion Chill Cube RV Air Conditioner is only available in the 18K BTU at this time. This particular unit you were looking at, part #LC54DX comes with the AC unit only, but we do offer it as a kit that comes…

view full answer...

Answer 9

Hey Scott, I went out to the warehouse and measured the etrailer Scissor Stabilizer Jack #e74RV and measured 26.5" long, 5" tall collapsed 24" extended, and has a 7 5/16" wide base. What Kind of trailer is this jack attached to?…

view full answer...

Answer 10

In order to determine what would be the correct replacement steps for your 2002 Holiday Rambler you will need to get the dimensions of the steps that are currently on your trailer and compare them to the picture I attached that shows the dimension of…

view full answer...

Answer 11

The Lippert Manual Pull-Out Steps #LC432687 that you referenced features a rise/drop of 7 inches, which refers to the distance/height between each step. The run is just the width of the step, which is 8-3/4 inches on this assembly. I have attached an…

view full answer...

Answer 12

The Lippert Manual Pull-Out Step for RVs - Triple #LC432687 referenced in your question should work great on your 2012 Keystone Cougar 5th Wheel Trailer. To confirm that this will mount to the existing hardware on your trailer, I recommend simply…

view full answer...

Fold Down RV Step that Fits 2019 Puma 19RLC

Product Page this Question was Asked From

Continue Researching