Replacement Steps for a 2002 Holiday Rambler

Question

Question:

needs new steps. what part # do I need? triple/manuel

asked by: Jim H

0

Expert Reply:

In order to determine what would be the correct replacement steps for your 2002 Holiday Rambler you will need to get the dimensions of the steps that are currently on your trailer and compare them to the picture I attached that shows the dimension of the RV Steps part # LC432687.

If the dimensions match what is in the picture the # LC432687.

I attached a measuring video for you to check out as well as an install video for the steps that should be very helpful.

expert reply by: Jameson C

0

click to enlarge

Answer 1

We don't have access to what the original equipment would be on your RV. Best option would be for you to get me as much info as you can on what the steps you have are. Can you get me any brand info and/or part numbers off of it? Pictures of the…

view full answer...

Answer 2

I really appreciate all the information as well as the photos. After doing some research, I found that the exact replacement for your Kwikee steps with model number 903206000 are indeed the Kwikee 32 Series Electric RV Double Steps #LC372261. I also…

view full answer...

Answer 3

For a double step that will fit in replacement of your Kwikee 32 steps part #LC372261 you'd want the Hickory Springs Manual Pull-Out Steps #98224EXTALC1 as this is only model we carry that's the correct width.

view full answer...

Answer 4

Hey Thomas, it's not uncommon for RV steps to not be easily replaced due to bolt holes not lining up with what's currently being sold. In situations like this the answer is that you can use a new set of brackets/outriggers like the part…

view full answer...

Answer 5

Yes, the temperatures you mentioned are normal. If you were getting over 200 degrees that would be a bad sign. But typically if all of the hubs are the same temperature you're good and it's only really an issue if one of the hubs is hotter…

view full answer...

Answer 6

There should hopefully be a model number or manufacturer information somewhere on your step assembly. This would typically be printed on a sticker on the underside of the steps or brackets. If you can't find any identifiable information, you can…

view full answer...

Answer 7

Hey Karen, yes you could remove the lowest step of the Lippert Manual Pull Out Step part #LC432687 like you are wanting to and you'd have the size steps you are wanting in a double step instead of a triple step. The steps are designed to come…

view full answer...

Answer 8

In order to replace the steps on your 2018 Keystone Cougar 25RES you'll first need to identify your mounting bracket width which are the brackets attached on the trailer that the steps mount inside. The next thing you'll need to do is count…

view full answer...

Answer 9

Hello John, thanks for reaching out. According to my research, the Atwood 8525-IV-DCLP is a 25,000 BTU furnace. We do have a 25K BTU unit from Dometic that can be used to replace this, but it would not be a direct replacement. Take a look at the…

view full answer...

Answer 10

Good to hear from you again, Gary! Yes, the MORryde Locking RV Storage Box #MR43RR is what you're looking for. This enables you to utilize that cavity for storage space, and it fits 26-3/4" to 28" opening widths. Does this look like it…

view full answer...

Answer 11

That’s a great question Chadwick, and this is one of those situations where the change in technology really matters. The GE Appliances Low-Profile RV AC w/ Heat Pump part #GE26RR will replace your current ARC13AACBL2 setup, but it’s important to know…

view full answer...

Replacement Steps for a 2002 Holiday Rambler

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching