Is There a B&W Turnoverball Underbed Gooseneck Trailer Hitch for a F-550 Cab and Chassis

Question

Question:

iam looking for a turn over gooseneck hitch for my 2013 ford f550 cab and chassis. a bandw

asked by: Mike D

0

Expert Reply:

The only option for a gooseneck hitch on a cab and chassis would be custom fabrication. The B&W Turnoverball Underbed Gooseneck Trailer Hitch part # BWGNRK1500 is designed for this type of application so that's what I recommend. None of the gooseneck hitch manufactures offer custom solutions for cab and chassis models.

expert reply by: Conner L

0

Answer 1

I spoke with my B&W representative who confirms that to install their GNRK1121 #BW77FR Turnover Ball hitch on a 2021 Ford F-150, the center of the 4 inch hole for the gooseneck ball would be placed 42-5/8 inches forward of the rear edge of the…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

From what I have found, the ALKO hub and drum assembly you have is for 7,000 lb axles. I believe the Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 12" - 8 on 6-1/2 #8-219-4UC3 will work as a replacement. This has the same…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The tire pressures called for either by the Chassis, RV or Tire manufacturer are the cold inflated tire pressures. There is no need to adjust the tire pressures while you drive unless you are travelling very long distances and in different climates.…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hello Shane, Great question, and I am going to need you pin box number to ensure we are getting you the right part number. If you are unsure of your pin box number, please feel free to send me the information off of the sticker on your current Pin…

view full answer...

Answer 8

For your 2016 Ram 3500 with the CM Flat Bed I recommend using the Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter #AM3100. This will attach to the 5th wheel pin box and convert it to be used with your gooseneck ball. You will not need an…

view full answer...

Answer 9

B and W does make a gooseneck hitch that was designed for universal flatbed applications like yours but it does not look quite like what you have. It's the part #BWGNRK1500 which would work in place of what you have but it does not look like you…

view full answer...

Answer 10

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

view full answer...

Answer 11

The dimensions are below for the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1500. Overall dimensions of the plate- 6” X 8” Bottom of the plate to the bottom of the socket Fin (brace) – 2-1/4" Bottom of the plate to the end of…

view full answer...

Answer 12

I had the Buyers Products 2-5/16" Fabricators Flatbed Gooseneck Hitch #3375613500 measured and have a picture with all measurements included. This is indeed rectangular and is typically installed with the longer sides going across the bed area.…

view full answer...

Is There a B&W Turnoverball Underbed Gooseneck Trailer Hitch for a F-550 Cab and Chassis

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching