Brake Shoes for Trailer with 10 inch by 1-1/2 inch Brake Assemblies
Question:
We need 10 in x 1.5 inch brake shoes only.
asked by: Jeanette A
1
Helpful Expert Reply:
Looks like you have a welded on brake assembly that possibly could have the brake shoes replaced with the part # BP04-065 which is for an older Dexter 10" by 1-1/2" setup that was made before 1999. See if you can find "Dexter" written anywhere on the assembly.
I attached a review video for this for you to check out as well.
expert reply by:
Jameson C
1
click to enlarge
Products Referenced in This Question
10" x 1-1/2" Electric Brake Shoe/Lining (One Wheel)
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- RH
- Brake Shoes
- 10 x 1-1/2 Inch
- Dexter
more information >
Product Page this Question was Asked From
Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Checking Out the Bulldog Winch Quick-Connect Set w/Dust Cover
- Video: What to Know About the 10" x 1-1/2" Electric Brake Shoe/Lining (One Wheel)
- Q&A: Replacement Brakes for a Dexter 2.8k Axle with 10 x 1-1/2 Inch Electric Drum Brakes
- Q&A: Correct Bearing Seal For a Dexter 2,800 Pound Axle
- Shop: 10" x 1-1/2" Electric Brake Shoe/Lining (One Wheel)
- Shop: Grease Seal
- Shop: Bulldog Winch Quick-Connect Set w/Dust Cover - 175 A - 2 ga
- Search Results: 25580
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Article: Trailer Wiring Diagrams
- Search Results: trailer brakes
- Shop: Trailer Wiring
- Q&A: What is the Best Grease for Trailer Bearings
- Shop: Grease Seals 10-36 (pair)
- Video: Finding the Right Trailer Wiring Harness
- Article: Most Popular Wheel Bearings
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Shop: Brake Controller
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: trailer jack
- Shop: Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Video: Measuring To Choose The Right Trailer Axle
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
Explore Expert Info
![Our Expert]()
on Trailer Brakes
on Trailer Brakes
