Correct Timbren Silent Ride Suspension System for a T@B Tear Trailer
Question:
Hello! I would like to install these on my T@B tear trailer...will it be compatible?
asked by: Dave
Expert Reply:
According to my research, your T@B trailer has torsion axles which means the Timbren Silent Ride Suspension System like part # TSR3500S05 will not be a good fit for you. Instead, you will want to use the Timbren Heavy-Duty Axle-Less Trailer Suspension part # ASR35HDS02. This kit will replace the torsion axles you have now and provide up to a 4" lift and the ability to run larger off-road tires. For a compatible hub you will also need the Dexter Trailer Idler Hub Assembly part # 42865-KIT.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly - 5,200-lb, 6,000-lb and 7,000-lb Axles - 12" - 8 on 6-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- 25580 / 14125A
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle - 4" Lift - 5 Bolt - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Timbren Silent Ride Suspension for Single Axle Trailers w/ 2-3/8" Round Axles - 3,500 lbs
- Trailer Suspension Parts
- Leaf Spring Replacement System
- Camper
- Car Hauler
- Utility Trailer
- 3500 lbs
- Round Axle - 2-3/8 Inch
- Single Axle
- Timbren
more information >
Product Page this Question was Asked From
Timbren Silent Ride Suspension for Single Axle Trailers w/ 2" Square Axles - 3,500 lbs
- Trailer Suspension Parts
- Leaf Spring Replacement System
- Camper
- Car Hauler
- Utility Trailer
- 3500 lbs
- Square Axle - 2 Inch
- Single Axle
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Timbren Silent Ride Suspension for Single Axle Trailers w/ 2-3/8" Round Axles - 3,500 lbs
- Q&A: Timbren Axle-Less Trailer Axle with Brake and Hub/Drum Assembly Recommendations
- Q&A: Parts Needed To Add Electric Brakes Onto a 3,500LB Dexter Axle Without Brakes
- Q&A: How To Add Brakes to a Aluma 6812H Utility Trailer
- Search Results: brake actuator
- Search Results: trailer brake controller
- Search Results: wheel chocks
- Search Results: electric trailer brake controller
- Search Results: 7 pin connector cover
- Search Results: trailer breakaway kit
- Search Results: trailer brake wiring
- Video: Timbren Silent Ride Suspension for Single Axle Trailers Test Course
- Shop: Brake Controller
- Shop: Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 89" Long - 3,500 lbs
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Wiring 7-Way Upgrade Kit
- Video: Timbren Trailer Suspension - Cushioned Suspension - TSR3500S06 Review
- Shop: Suspension Enhancement
- Q&A: Will Timbren Silent Ride Change Ride Height Compared to Torsion Axle
- Q&A: Does the Timbren Silent Ride Provide Greater Suspension Travel Than Standard Leaf Springs
- Q&A: Suspension Kit Recommendation for Overland Custom Trailer with 3.5K Dexter Axle
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Video: Measuring To Choose The Right Trailer Axle
on Trailer Suspension Parts
