Customers compare RM-2460-2570-3 to these similar products
Products Featured in this Video
Hello neighbors, it's Brad here from etrailer, and today I have Jeff from Roadmaster. And we're gonna be taking a look at something that a lot of people don't think about on their campers, and that's, well suspension, you know And a lot of times people buy a camper, and they go, "Well, it is what it is. That's the ride that we're gonna get." And that's not necessarily the case, correct … see more >
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Videos
Help Articles
Expert Answers
Hey Kevin! I didn't see an order yet but it sounds like you already got some shocks based on your 2nd question. I went ahead and added it below your 1st question above. If you still need shocks you can use the Roadmaster Comfort Ride Shock…
view full answer...Between the 7K #RM-2460-2570 and 8K #RM-2460-2580 Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks I recommend going with the 7K for your 2018 Vilano 5th wheel. It will give you the best ride possible since it's designed to work with…
view full answer...Hello Lanny, thanks for reaching out. The CRE 3000 is already a pretty good suspension system, but if you want to upgrade, the first thing that comes to mind are the AllTrek 4000 equalizers. They have more rubber than the CRE 3000, 40% more, so you…
view full answer...I would be happy to help! The Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Tandem 7K Trailer Axles #RM-2460-2570 is for trailers that have 7000lb tandem axles, and use springs that have a 3500lb capacity each (one spring on…
view full answer...Hey Mark, I looked up the specs of the spring you have now and found that it is a 24-3/4 inch long spring from eye center to eye center and for a 7k axle. So that means that the replacement spring part #EM28AJ that you referenced will work great as a…
view full answer...Personally Russ, if you are planning to keep your 2018 Grand Design Momentum 351M toy hauler and want to benefit from a better ride then upgrading to the Roadmaster Comfort Ride Leaf Spring Suspension Kit #RM-2460-2570 makes the most sense. If you…
view full answer...Since you have 8K 3" axles you'll just need the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks - Tandem 8K, 3" Trailer Axles #RM-2460-2580. The 3-1/2" requirement you were getting with the #RM-2470-2580 was simply…
view full answer...Hey Dallas, If you'd like, you can use the Dexter Bronze Bushings #K71-291-00 with the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks - Tandem 8K, 3" Trailer Axles #RM-2460-2580. That said, it really isn't needed because…
view full answer...I really like the Timbren Silent Ride systems like part #TSR14KT01 that is rated for 3" axles and 14,000 lbs. This gets rid of the traditional leaf spring setup and gives you pivoting arms and Double Aeon rubber springs for a better ride…
view full answer...It seems like the end goal for this is going to be to lower your trailer a little bit; if I'm misunderstanding what the end goal is here please let me know. I'll start this off by saying that the Timbren Silent Ride #TSR14KT01 is not an air…
view full answer...The Timbren Silent Ride Suspension kit part #TSR14KT01 does require an axle to be provided. I attached a picture that shows how Timbren recommends sourcing and installing the axle tubing.
view full answer...Great question! The Timbren Silent Ride Suspension for Tandem Axle Trailers w/ 3" Round Axles #TSR14KT01 have an articulation of 1-27/32 so you need to make sure that you have about 4-5/8" of space above your tire. I confirmed this with my…
view full answer...