Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The Dometic RV toilets like the part #DOM29FR that you referenced use the standard 1/2 inch thread size for the supply line like most toilets do.
view full answer...The Dexter Electric Trailer Brake Kit #23-26-27 is the correct kit for your Dexter 3,500lb torsion axle studs. This includes both the left and right hand side brakes for one axle. It does not include a hub. I do recommend looking at the Dexter…
view full answer...Since you're needing to add electric brakes to your T@B trailer you want to go with the Timbren #ASR2KHDS01 which has the brake mounting flange whereas the Timbren #ASR2000S01 doesn't have provisions for the brakes. Then for brakes you can…
view full answer...In order to add brakes to your Aluma 6812H Utility Trailer you'll need a few items which I have attached a list of for you below. Dexter Nev-R-Adjust Electric Trailer Brake Kit part #23-468-469 Dexter Trailer Hub & Drum Assembly for 3,500-lb…
view full answer...From the mounting surface on the frame of your trailer down to the axle center on the Timbren Silent Ride part #TSR3500S06 measures 5-1/4 inches. You would need to compare that to your current setup to determine if that would change the ground…
view full answer...I may have a solution for you, but I'm not sure the Timbren Silent Ride Suspension #TSR3500S06 is exactly what you're looking for. The Timbren Silent Ride does not necessarily allow for more travel than your current leaf spring suspension…
view full answer...For an off-road application I highly recommend a Timbren Silent Ride Suspension system which is available for a 2-3/8" Round 3.5K Axle #TSR3500S04 or a 3" Round 3.5K Axle #TSR3500S06. These give you a little more control and perform better…
view full answer...According to my research, your T@B trailer has torsion axles which means the Timbren Silent Ride Suspension System like part #TSR3500S05 will not be a good fit for you. Instead, you will want to use the Timbren Heavy-Duty Axle-Less Trailer Suspension…
view full answer...Looks like Maxion/Vesper wheels like the #TA56FR are made in Turkey whereas Dexstar trailer wheels are made in USA.
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...The Electric Jack w/ Footplate and 7-Way Plug #EJ-3527-BBX uses a 7-way RV-style plug. I have included a diagram that shows the pin-out for RV style 7-way plugs. This will show you what each pin does. I have also listed the functions below and linked…
view full answer...Most tire manufacturers don't run capacity testing on their tires at varying tire pressures so the best practice is to run the tires at the maximum pressures listed on the tire's sidewall. At pressures below the tire's maximum, the weight…
view full answer...Related Searches
Filter Your Search
Contact and Help