What Size Wire is Recommended for Use in the Electrical Quick Connect for Electric Winches  

6 gauge wire can handle up to 55 amps, so the wire and the #DL24085 quick disconnect you're planning on using should work very well for you. The connector is designed for use with 6 gauge wire, so the wire and quick disconnect will be compatible…

There could be two possible reasons as to why the clutch is not engaging when you are pulling in your boat with the Dutton-Lainson TW4000 StrongArm Electric Winch part #DL25200. The first reason is the simplest to fix and it entails tightening the…

There is one hitch lock for a 2-1/2 inch hitch that stands above the rest to protect the Gen-Y Phantom X Adjustable 2-Ball Mount - 2-1/2" Hitch #GY95XR. The lock I highly recommend to keep your ball mount safe is the InfiniteRule Hitch Lock for…

I spoke with my contact at Dutton-Lainson regarding the TW4000 StrongArm Electric Winch #DL25200 referenced in your question. She stated that the winch is not designed to serve as a boat strap when traveling so this is not recommended. Once pulled in…

The Dutton-Lainson StrongArm Electric Winch, #DL25200, itself is not trailer-specific, so you could use it with any trailer provided that it is mounted properly. We have several mounting kits available depending on where you would need to mount the…

The Dutton-Lanison StrongArm Electric Winch #DL25215 is a great replacement for your current PowerWinch 912 as they have similar ratings, the StrongArm 9,000 is rated to pull up to a 9,000 pound boat, while the PowerWinch 912 is rated for up to a…

Yes. There's no reason that the Dutton-Lainson Strong Arm Winch #DL25215 can't be mounted upside down as long as the winch strap isn't rubbing on anything. The capacity of the winch won't be affected with this mounting method, so…

On a boat trailer, you will need to position the Duton-Lainson winch, #DL25215, so that the loading ring on the bow of your boat is the same height or a little higher than the winch drum when the boat is loaded on the trailer. You will need to us a…