bing tracking image

Dutton-Lainson Trailer Winch DL24055 Review

content loading

Customers compare DL24055 to these similar products




Products Featured in this Video



Review of Dutton-Lainson Accessories and Parts DL24055


Today we're going to review part number DL24055. This is the Dutton Lainson Mounting Adapter Plate for the Dutton Lainson Strong Arm Electric Winches. This heavy zinc-plated adapter plate will allow you to mount the Dutton Lainson Strong Arm Electric Winches onto a narrow trailer winch stand. Basically, this plate has the quick-mount studs that allow for easy installation and removal of the winch base of your Strong Arm winch. Basically, this has a nice zinc Tough Plate finish. It is made in the USA. A few specs on this. Length is going to be right at 8 inches, width is right at 4 inches and it is a 3/8ths-inch-thick plate.

The application for this is for all Dutton Lainson Strong Arm SA and TW Series electric winches. The way this would work is, basically, you get the Strong Arm Winch Base and it would have the three slots in it that would line up here. What you would do is, first you would install this to your narrow winch stand using these bolts and nuts with the washer. What you would do is just drop those in there, and there's three of them, so you do want to use the three bolts. You can use two, but they do recommend that if only two are used, you don't want to exceed a 3,000-pound line pull because with two bolts, it could be possibly be broken. If possible, you always want to use all three of these to install it. Once it's installed to your winch stand, then what you can do is, your Strong Arm winch base will just lower down, the holes will line up.

You just slide it until they lock into these quick-mount studs. Once it's onto those studs, you just drop this hex-head bolt through the Strong Arm Winch Base through this adapter plate and the winch stand. Then you just take this wing nut to hold it into place. Very simple, easy installation. That should do it for the review on part number DL24055, the Dutton Lainson Mounting Adapter Plate for the Strong Arm electric winches. .


Questions and Comments about this Video

Info for this part was:

Employee Jeff D
Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.