Will the Curt Class V Trailer Hitch Fit on a 2010 Toyota Tundra TRD

Question

Question:

i want to know about towing hitch patr number C15398 well fix on toyota trd st 2010 model

asked by: FAREED

0

Expert Reply:

Yes, the Curt Class V Trailer Hitch, item # C15398, will fit on a 2010 Toyota Tundra TRD, as long as it does not have a factory installed hitch on the vehicle.

expert reply by: Robert G

0

Sam

7/24/2020

Does this fit on a 2014 Totyota Tundra - SR5 with 5.7L V8? With a factory installed trailer hitch? What is the difference whether the truck has a factory installed hitch or not?

Reply

Chris R.

7/29/2020

Unfortunately the Curt # C15398 will not fit your Tundra if it's equipped with the factory hitch. The factory unit would interfere with the new one and I believe it's actually an integral part of the frame/bumper, so it cannot be easily removed without making significant modifications to the truck. Unfortunately at this time we don't have an aftermarket hitch that's designed to fit with the factory unit.

Reply

Answer 1

We do offer a range of trailer hitch options for your 2012 Toyota Tundra Rock Warrior TRD. Since your factory-installed hitch has been damaged you'll naturally need to remove this entirely. After doing so I suggest you very carefully inspect the…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hey Jack, If you're talking about a transition plate then you'll want the etrailer Enclosed Trailer Transition Plate #e32JR. This can be installed on either end of the ramp to help make the transition onto easier or at the hinge of the ramp…

view full answer...

Answer 5

We do have something for you. But if when you say standard, you mean the 6-1/2' bed then the answer is no the TorkLift Custom Frame-Mounted Camper Tie-Downs #TLT2307 and #TLR3500 are not what you would want because they only fit the 5-1/2'…

view full answer...

Answer 6

Hello Robert, Yes, the only difference between the 2 is that the etrailer Enclosed Trailer Transition Plate #e32JR is quantity: 1, and the #e99RV is quantity: 2. Right now it looks like if you wanted a better deal to buy 2 of the #e32JR. It is times…

view full answer...

Answer 7

Yes, you can! We've spoken to Curt about this exact issue before and we do have a solution. The Curt Hitch item #C15398 is designed for the 2013 Toyota Tundra's that come without a factory hitch. However, it will fit the Tundra's that…

view full answer...

Answer 8

That is correct. There is nothing to support the bumper when you install the Curt Hitch item #C15398 on a 2013 Toyota Tundra. That hitch was designed for the trucks without the factory hitch so there's no reason for it to have built in support…

view full answer...

Answer 9

Since you're willing to remove your 2008 Toyota Tundra's factory hitch, I recommend the etrailer Hitch item #e66KR. This is a class V hitch with a 2" receiver. It has a massive 16,000 lbs towing capacity, which is the closest capacity…

view full answer...

Answer 10

The B&W Continuum #BW38FR you found is the only kit we have which carries the cylinder separately from the entire hitch system.

view full answer...

Answer 11

The Thule Hitching Post Pro 4-Bike Rack #TH934XTR will absolutely allow you to open the tailgate of your 2019 Toyota Tundra when you have the rack folded down. In fact, we test fit this bike rack on a 2019 Tundra, and as you can see by the photo I…

view full answer...

Answer 12

All of the TorkLift tie downs for the 2007 Toyota Tundra do require at least a 4 inch by 4 inch side plate on the vehicle's hitch to bolt the tie downs to. If the hitch on your vehicle does not have a 4x4 side plate, you do have to install a new…

view full answer...

Will the Curt Class V Trailer Hitch Fit on a 2010 Toyota Tundra TRD

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching