To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This Curt Trailer Hitch Receiver gives you a solid, everyday towing setup. With a Class III rating, it’s built to handle up to 6,000 lbs gross trailer weight and 600 lbs tongue weight, or up to 8,000 lbs GTW and 800 lbs TW when used with weight distribution. The 2" x 2" receiver works with a wide range of accessories—bike racks, cargo carriers, ball mounts, and more—so you can haul what you need for work or play without worrying about strength or fit.
You don’t need a lift or welding setup to get this hitch on your vehicle. It bolts directly onto the frame using the included hardware kit and installation instructions. The custom-fit design lines up with existing mounting points, saving time and keeping the process straightforward. It’s a clean install that most folks can tackle in their driveway with basic tools.
The fully welded steel construction provides reliable strength for towing and hauling, while the gloss black powder coat finish over a protective base coat keeps rust and corrosion at bay. The round-tube design adds a clean, finished look under the bumper that blends in better than bulky square frames. This hitch is designed to stay strong and look sharp mile after mile.
Each hitch comes ready for use with complete mounting hardware and easy-to-follow instructions. Ball mount, pin, and clip are sold separately so you can choose exactly what fits your setup. Plus, it’s backed by lifetime technical support from etrailer.com experts who install and use these hitches every day.
Customer Satisfaction Score:
82% were satisfied with this product
18% of customers were not satisfied
Ratings & Reviews
Easy to install very good looking unit
I was totaly surprised at the ease of installation correct and precise fit. I expect to be completely satisified with the use for which it is intended
The trailer hitch fit perfectly and was easy to install (other than wrestling to get the existing bolts off the truck). Your service was excellent! I would use your company again without hesitation and would recommend you to anyone.
Thanks for a great product and great service!
Excellent quality, best product, holding up strong
MY WIFE AND I INSTALLED THIS TOGETHER IN 35 MINUTES. IT FIT PERFECT AND LOOKS FACTORY. AFTER DRY FITTING AND LOOSLY TIGHTENING ALL OF THE BOLTS WE MADE SURE IT LOOKED GOOD FROM THE REAR AND WAS CENTERED. WHEN TIGHTENING ALL OF THE BOLTS , MAKE SURE YOU TIGHTEN THE 3 SIDE PLATE BOLTS FIRST. THIS WILL PULL THE PLATES TIGHT TO THE SIDE FRAME. THEN TIGNTEN THE TOP 2 TOP BOLTS.
It was really easy to install very good Hitch
I am very happy with my item. It has been a pleasure doing business with you.
great product,,, fast shipping,, thx
Great Product
Great service
Fast and free shipping.
What more can you ask for.
Bolted right in just as described! Just had to trim the 4 large washers a little bit with a cutoff wheel because they are little too wide. Other than that, very straightforward install.
Took less than 45 minute to install ,fit perfectly. Shipping was fast. This is our forth hitch we have order with you and will contunue to do so.
just like described
installation was a snap
shipping was fast fast fast
recieved hitch and had it in stalled in about 30min.s by myself no help from anyone very well pleased with the hitch thanks
Not a perfect fit. Installation went as expected... no real problems. Directions good. Web site tutorial quite helpful. I would buy again!
The product came when expected. All parts were there and it was very easy to install. The hardest part was removing the factory brackets on my 2016 Tundra.
This was a very simple install; it took me a lot longer to get the original bolts loose and off the truck than it did to install the new hitch. Went on perfectly, no hassle with lining up the bolts and looks great, too. Highly recommended.
Great product, easy to install. Since I had to do the job by myself, I attached the unit to a supporting 2x10 (plywood would also work) and used a pair of auto jacks to slowly lift the hitch into position. Once I made contact with the truck, the hitch remained snug and I could insert the bolts as directed. I had 'er done in about a hour.
The installation was simple, the hitch fit perfectly, and the protective finishes have held up perfectly - not one speck of rust after one year. I also have purchased another hitch kit for my 1997 Acura - same thing, simple easy installation and has performed perfectly.
Etrailer was on point with their customer service.
Tech notes made it easy to determine that I was getting the right hitch. Installation was easy. Shipping was fast and actually made it earlier than expected arrival. Thanks to etrailer and also Curt hitches for all the right info. Very satisfied and would recommend both etrailer and Curt to anyone who wants great service and quality.
I received this on time as communicated. Product is as advertised on the site. Easy directions and I installed myself within a couple of hours. I will recommend etrailer to friends in the future.
J. B.
12/10/2015
Works as expected
I have yet to pull with this product so I can only comment on the install. I have a 2012 Tundra and the hitch did not sit flush with the frame rails. There is definitely a gap in between the frame rail and the unit (the side, not the top mounting portion), but its still a solid connection due to a total of ten bolts on the installation. The other problem I had was this hitch extends farther out than others I have seen (~4 inches past the bumper). This inhibited me from using the factory mount (where the 4 pin was) to hook the 7 pin plug (part ETBC7) and I had to fabricate my own mount. Good product but gen 2 Tundra owners might want to be aware of this.
I recently purchased a hitch set up for my Toyota Tundra. I installed the towing kit without having to drill any holes. It arrived in a timely manner and I am very pleased with cost and the product!
I plan to pull a trailer withe towing package. I also purchased a bulldog lift for a work related piece of equipment that also worked very well.
This review will only cover the installation of the hitch since I haven't towed anything with it at this time.
The installation was relatively simple, and I was able to complete it without any assistance. Laying on my garage floor I pushed up the tow bar in the middle with one hand and screwed in one fine thread top bolt on the RH side and then maneuvered my hands and did the same on the LH side. Screwed the other two bolts in the top angle and hand tightened. Installed remaining bolts per the instructions without a hitch. (no pun intended) Tightened all of the side plate bolts first and the four top fine thread bolts last. This allowed the side plates to pull up nicely with the bumper support thingy. The only problem I had was I didn't have a socket and wrench for the 1/2" bolts. The size is not specified in the instructions or they have changed the type of bolts. The other bolts were 19mm and 17mm which didn't match the instructions either. Fortunately I had purchased a metric set of sockets and wrenches up to 19mm. Had to borrow the stuff for the 1/2" bolts from the neighbor, which I really don't like doing.
Ultimately the hitch is very well made and easy to install. Fit and finish are excellent. :)
Strong, well built, and easily installed. Delivery was very quick.
Great hitch and service!
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Tomas M.
10/8/2015
Perfect