Replacement Wiring Harness for Electric Actuator on Meyer Basic and Auto-Angling HomePlows

Updated 10/24/2026 | Published 10/23/2026

Products Featured in This Question

Meyer HomePlow Residential Snowplow w/Electric Lift - For 2" Hitches - 18" Tall

(2)

$2476.66

Replacement Wiring Harness for Electric Actuator on Meyer Basic and Auto-Angling HomePlow - Qty 1

(2)

$40.53

Wireless Receiver and Key Fob for Meyer HomePlow Electric Lift Snowplows

(4)

$98.21

Wireless Receiver for Meyer HomePlow Electric Lift Snowplows

(2)

$62.29

Question:

I need a crossmember bolt kit for a 2022 f150 , and a wiring harness that goes from the battery to the plow and goes inside the cab. I already have the control handset , crossmember and the plow for the half ton truck. Thank you

asked by: George M

Expert Reply:

Welcome back George. The Replacement Wiring Harness for Electric Actuator item # ME37DR is the correct one for the Meyer HomePlow item # ME88FR you were looking at. This harness connects to your F-150's battery and plugs into the remote receiver item # ME87FR or item # ME59FR. It'll also connect to the actuator on the HomePlow item # ME88FR.

Unfortunately, Meyer does not make a crossmember bolt kit that can be purchased separately for their plows. The mounting hardware is included with the plows like item # ME88FR. I've linked the installation instructions below. There's a detailed blown up parts diagram and list on page 33 and 34. I recommend checking there for the correct replacement hardware you need.

How big of an area are you going to be plowing and how much snow are you expecting this year? Feel free to answer this and throw in any other questions you have, where it says Add Comment.