Ultra Fab Electric Landing Gear Replacement for 2006 Keystone Raptor 3319

Updated 10/09/2026 | Published 10/06/2026

Products Featured in This Question

Ultra-Fab Deluxe Electric Landing Gear Set - Weld On - 38" Lift - 12,000 lbs

(288)

$1089.34

MORryde X-Brace 5th Wheel Landing Gear Stabilizer

(320)

$167.57

Question:

Will the Ultra fab Deluxe P 17-943010 replace my original landing gear on my 2006 Keystone Raptor 3319 5th Wheel ?

asked by: Tim L

Expert Reply:

Hi Tim! Yes, the Ultra Fab Deluxe Electric Landing Gear Set, part # UF17-943010, is a good option for replacing the landing gear on your 2006 Keystone Raptor 3319 5th Wheel.

Since this is a universal landing gear setup, the mounting brackets will most likely to be welded directly to the frame of your Raptor. The legs may not line up with the existing weld stops, so some modification to the mounting locations may be necessary. I recommend having a qualified professional welder handle the installation to make sure the brackets are securely attached to the frame. These jacks have a combined 12,000 lb weight capacity, provide 38 inches of lift, and operate at a rate of 15 seconds per inch. They also come with a 3 year warranty.

Since you’re replacing the landing gear, I’d also take the opportunity to add the MORryde 5th Wheel Cross Brace Landing Gear Stabilizer, part # MR72AR. These braces work with your landing gear to help minimize the side to side movement you can sometimes feel when your toy hauler is set up at the campsite. They bolt on and move with the landing gear, so there is no need to adjust them separately every time you set up.

If you would rather avoid modifying your trailer frame, just let me know the distance between the mounting brackets on your current landing gear, and I can help you find a replacement that matches your existing setup.

What do you usually haul in your toy hauler ATVs, bikes, or family gear?

expert reply by: Heather A

lg
(click to enlarge)

Tim L.

10/6/2026

My welded brackets are 19.125 apart.

Heather A.

10/6/2026

@TimL The Ultra Fab Deluxe Electric Landing Gear Set, part # UF17-943010 will work well for you then.

Nathan

10/7/2026

I have mine on a 2008 keystone everest 37'. They work great. I replaced a single motor system with this dual motor system. The only issue I had was they advertised a correct fit but, I had to do some modification to it to get it to fit properly. I am very happy with the end result.