bing tracking image
  1. Trailer Jack
  2. Dexter
  3. 5th Wheel Trailer
  4. Dump Trailer
  5. Enclosed Trailer
  6. Gooseneck Trailer
Dexter Double-Acting Hydraulic Tandem Jack System - 20" Lift - 20,000 lbs - Direct Weld
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Dexter

Dexter Double-Acting Hydraulic Tandem Jack System - 20" Lift - 20,000 lbs - Direct Weld

Part Number: DX42CR
In Stock
$2,642.35
Retail:$2,687.17
You Save: $44.82
Trailer Jack
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Smooth and powerful hydraulic jack kit includes everything you need to lift your heavy load with a press of a button. The selector valve safely controls movement while the pivoting foot pad stabilizes the jack on rough terrain. Great Prices for the best trailer jack from Dexter. Dexter Double-Acting Hydraulic Tandem Jack System - 20" Lift - 20,000 lbs - Direct Weld part number DX42CR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (3)
  • Q & A (0)
  • Photos

Dexter Trailer Jack - DX42CR

Highlights

  • 20,000-lb Combined Hydraulic Lift: Two 10,000-lb jacks raise heavy equipment, livestock, and commercial trailers together.
  • One HPU Powers Both Jacks: Included double-acting power unit handles extension and retraction for the complete tandem setup.
  • Flow Divider Included: Splits hydraulic flow between both legs so they can raise and lower together from one control.
  • 20" of Powered Lift: Each jack gives you plenty of range for hitching, unhitching, and adjusting trailer height.
  • Direct-Weld Installation: Matching 4" square jack tubes weld permanently into suitable locations on the trailer frame.
  • Complete Hydraulic Plumbing: Six 48" hoses and the required fittings are included to connect the tandem system.

Features to know about

Raise a Heavy Trailer from Two Points: Tandem Hydraulic Jacks Share the Load

Instead of cranking two heavy landing legs individually, this system uses a pair of hydraulic jacks to raise and lower the front of your trailer together. Each leg provides 10,000 lbs of lifting capacity and 12,000 lbs of support capacity, giving the system 20,000 lbs of combined lift and 24,000 lbs of combined support. Each jack also gives you 20" of lift for hitching, unhitching, and adjusting trailer height.

Power Both Legs from One System: Separate HPU and Flow Divider Work Together

The included KTI DC-4442 12V double-acting hydraulic power unit supplies pressure for both extension and retraction, while the flow divider distributes hydraulic flow between the two jack legs so they can operate together. The 3-qt power unit provides up to 3,200 psi for extension and 1,500 psi for retraction, with a corded two-button pendant keeping operation in your hand beside the trailer.


The flow divider helps both legs operate from the same hydraulic system, but it does not make the jacks self-leveling. If one foot reaches the ground before the other, the system will not independently level the trailer from side to side.

Plan the Installation Before Welding: Keep Each Foot Within 8" of the Frame

Both 4" x 4" square jack tubes are designed for direct-weld installation. Position each jack so the distance from the bottom of its footplate to the underside of the trailer frame does not exceed 8", helping preserve the intended lifting geometry and usable range. The separate hydraulic power unit should be mounted in a weather-protected location on the trailer.

Everything Connects as One System: Hoses, Fittings, and Battery Cables Are Included

Six 48" hydraulic hoses and the required fittings are included to connect the power unit, flow divider, and both double-acting jack legs. Positive and negative 4 AWG battery cables are also included for a nearby 12V battery. If your installation places the battery farther from the HPU, use appropriately heavier cable to limit voltage drop under load.

Give Both Legs a Solid Base: Wide Feet Pivot with the Ground

Each jack uses a 9-1/2" x 9-1/2" pivoting footplate that spreads the trailer load across a broad contact area and follows uneven gravel, dirt, or pavement more naturally. The exterior-grade black finish helps protect the square-tube jack bodies through everyday weather and trailer use.

Specs

Capacity and Lift:

  • Lift capacity:
    • 10,000 lbs per jack
    • 20,000 lbs combined
  • Support capacity:
    • 12,000 lbs per jack
    • 24,000 lbs combined
  • Lift: 20" per jack
  • Retracted height: 30-3/4"
  • Extended height: 50-3/4"
  • Footplate: 9-1/2" long x 9-1/2" wide
    • Pivoting design

Hydraulic System:

  • Configuration: tandem, double acting
  • Hydraulic power unit: KTI DC-4442 12V double-acting pump
    • Reservoir capacity: 3 qt
  • Maximum hydraulic flow rate: 2 GPM
  • Maximum extension pressure: 3,200 psi
  • Maximum retraction pressure: 1,500 psi
  • Flow divider: included
    • Distributes hydraulic flow between both jack legs
    • System is not self-leveling
  • Hydraulic hoses: 6 included
    • Overall length: 48" each
  • Hydraulic fittings: 10 included
    • 1 tee fitting
    • 2 elbow fittings
    • 7 straight adapters
  • Manual override: not available

Hydraulic Fluid:

  • Normal-temperature operation: ISO 22, ISO 32, or compatible ATF
    • Dexron III ATF is an approved option
  • Cold-weather operation: ISO 15 recommended from approximately -20°F to 32°F
  • Do not mix hydraulic fluid types

Electrical:

  • Power: 12V DC
  • Battery: required (not included)
  • Battery cables: included
    • 4 AWG x 20" positive cable
    • 4 AWG x 20" negative cable
    • Use appropriately heavier cable if the battery must be mounted farther from the hydraulic power unit
  • Control: corded two-button up/down pendant

Mounting:

  • Jack mounting style: direct weld
  • Tube outer dimensions: 4" x 4"
  • Maximum distance from bottom of footplate to underside of trailer frame: 8"
  • Hydraulic power unit: mount separately in a weather-protected location

Included Components:

  • 2 hydraulic jacks
  • KTI DC-4442 12V double-acting hydraulic power unit with 3-qt reservoir
  • Flow divider
  • Corded up/down pendant
  • (6) 48" hydraulic hoses
  • 10 hydraulic fittings
    • 1 tee fitting
    • 2 elbow fittings
    • 7 straight adapters
  • 4 AWG x 20" positive battery cable
  • 4 AWG x 20" negative battery cable
  • 15" rubber retaining strap

Construction:

  • Tube shape: square
  • Finish: exterior-grade black finish

Warranty:

  • 3-year limited warranty

PJD-12-20-K Dexter Axle Dual Hydraulic Jack Kit w/ Double Acting Pump - 10,000 lbs

Installation Details DX42CR Installation instructions



Customer Satisfaction Score:

Ratings & Reviews

4.7

3 reviews
5 Stars
(2)
4 Stars
(1)
3 Stars
(0)
2 Stars
(0)
1 Star
(0)
Review Sort Icon
by:
Overall the jacks and the system work good but the only thing that I would suggest it to make a cover that will fit over the hydraulic pump and motor! There are other manufacturers that have that option with theirs so there is no reason that this set up don’t have it
by:
by:
Speed delivery
3
3
true

See what our Experts say about this Dexter Trailer Jack


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Steven C
Installed by:
Steven C
Employee Wilson B
Updated by:
Wilson B
Employee Alex H
Updated by:
Alex H
Employee Michael B
Updated by:
Michael B
Employee Kim H
Written by:
Kim H

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924