bing tracking image
Q & A Icon

What Info Is Needed to Convert Fifth Wheel Trailer to Gooseneck Coupler  

Updated 09/29/2026 | Published 09/24/2026

Question:

I have a 2002 GMC 1500 HD with a 6.5’ bed. I’ve been using the Curt A16 slider 5th wheel hitch that I purchased from you along with the bed rails and electric brake control. It has worked great and I never really had to use the slide feature. I’ve been pulling an older Nomad double axle trailer by SKYLINE. Weight is 4840 lbs and the model number is 2165. My issue is my 4 sons are all out on their own now and I’m 66 and 100 rated disabled vet. I can’t load/unload the hitch [actually I used a come along attached to the grandkids 8x8 swings set main beam along with grade 80 chain and bought an eyelet that attaches in the coupler of the hitch and lifted the A16 out of a wheeled cart high enough to back my truck under it. All was good until my wife saw me on the ladder using the come along and that operation was shut down!! Improvise, adapt, and overcome…right? So now I’m looking at your gooseneck adapter that is small enough for me to handle as well as a pin box to convert my 5th wheel to be able to hook up to the adapter. Suggestions you have for my truck and trailer are appreciated. I have pictures of the pin box to send.

1

Helpful Expert Reply:

Hey Brian, I like style! Who hasn't done some sketchy things in the name of problem solving haha. I think you are on the right track in your thinking though. If you can get a gooseneck adapter setup going you will never have to worry about dealing with a super heavy fifth wheel hitch in the bed of your truck. My parents went the same route for the same reason and they love it.

So it really comes down to what pin box is on your trailer. If you can get me that info I can come up with the best adapter solution for it. There should be a sticker on it that has it's model brand and part number like Lippert 1621. Then to convert to a gooseneck hitch you can use the Demco part # DM5996 which fits into your rails you have currently. This is lightest weight option too as it only weighs 46 lbs.

expert reply by:
1
Jameson C
Brian S. profile picture

Brian S.

9/24/2026

Jameson: Thanks for the quick response. I’ll get that info to you as soon as I can.

Jameson C. profile picture
Etrailer Expert

Jameson C.

9/28/2026

@BrianS sounds good!
Brian S. profile picture

Brian S.

9/25/2026

Jameson: Looks like my Skyline Nomad 5th wheel is a 1996 year model and the pin box is 12.5 inches wide. After researching on the internet it shows the pin box to be a RBW 7028 or equivalent to a FabEx500/520 series. ( I just went out and cleaned up the plate on the side of the pin box…it is a RBW 7028). I looked at some of the products on your website. Would the Curt Bent Plate 5th wheel to gooseneck adapter work for my set up? I liked the option of turning it around to gain a few more inches in my short bed. Lastly, do you offer a military discount? Thanks Brian

Jameson C. profile picture
Etrailer Expert

Jameson C.

9/28/2026

@BrianS thanks for getting me that info! Based on that the correct fifth wheel to gooseneck adapter would be the Shocker part # SHK55MR.This is a really great option but it's also the only direct fit adapter we have for your pin box.
Brian S. profile picture

Brian S.

9/28/2026

Thanks Jameson for the info on the adapter hitch. It looks like it should work with the Curt Bend Plate adapter that should work with my trucks bed rails
Jameson C. profile picture
Etrailer Expert

Jameson C.

9/29/2026

@BrianS At first I didn't know what you meant by Curt bent plate adapter but I figured out it was the part # 16055. Yes it will work great with that.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>